Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

BEARING, BALL, ANNULAR

Open
SPE4A6-27-Q-0293Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-Q-0293 is a firm fixed price procurement for 15 annular ball bearings, part number 519923-1, identified as a source control item manufactured by Honeywell Intl. Inc./Engines and Systems. The contract requires delivery within 41 days after order, with a specified material need date of September 1, 2026, for shipment to the Defence Forces Logistics Command in Finland. Award is contingent upon strict domestic sourcing restrictions; bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the material to be considered for award. Technical and quality compliance is governed by the DLA Master List, including requirements for tailored higher-level quality, inspection and acceptance at origin, and the use of specific measuring and test equipment. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M, with specific mandates for palletization and precautionary marking. The government will determine the best value based on a comparative assessment of price, past performance, and quoted delivery, with past performance and SPRS assessments weighted heavily. Administration of the contract, including invoicing and payment requests, is managed through the Wide Area WorkFlow system.

General Info

Procurement of 15 Honeywell annular ball bearings for delivery to Finland.

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

1
PDF, High priority: read this first23 pages · rfq
High

Read the document

Due in 8 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 8 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA

Full Description

Show more
BEARING,BALL,ANNULAR RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
"SOURCE CONTROL ITEM" HONEYWELL INTL. INC./ENGINES AND SYSTEMS CAGE: 70210 DWG: 519923 I/A/W LATEST REVISION P/N: 519923-1
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
APPROVED SOURCE(S): TORRINGTON CO./FAFNIR BEARINGS DIV., CAGE: 21335 FAG BEARINGS CO., CAGE: 43991 NEW HAMPSHIRE BALL BEARINGS INC., CAGE: 50294
IDENTIFY TO: BEARING RESTRICTION RESTRICTION ON THE ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (ROLLING ELEMENTS, RETAINER, INNER RACE, OR OUTER RACE) MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS.
A CONTRACTOR’S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT https://www.dla.mil/Aviation/Business/Foreign-Bearing-Waiver/. TO OBTAIN A COPY OF THE CONTRACTOR’S DECLARATION. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD.
IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED OR HELD PENDING A WAIVER APPROVAL REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED OR BUYER MAY REQUEST A QUOTE EXTENSION. SEE DFARS
SPE4A6-27-Q-0293
SECTION B
SUPPLY/SERVICE: 3110-01-365-0555 CONT'D
225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS.
NEW HAMPSHIRE BALL BEARINGS INC 83086 P/N 519923-1 NEW HAMPSHIRE BALL BEARINGS INC 83086 P/N SR4A1PPDK49RHEOLUBE733 NEW HAMPSHIRE BALL BEARINGS INC 50294 P/N 519923-1 NEW HAMPSHIRE BALL BEARINGS INC 50294 P/N SSRI-1214ZZRA1P49LY370 FAG BEARINGS CORPORATION 43991 P/N 519923-1 FAG BEARINGS CORPORATION 43991 P/N SR4A22ZK0ITIC49RHEOLUBE733
TDP Rev A Gen 1 IAW BASIC DRAWING NR 70210 519923 REVISION NR A DTD 07/02/1987 PART PIECE NUMBER: 519923-1
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 QAP-B02 REVISION NR B DTD 12/11/2013 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 3110-01-365-0555 15.000 EA $ _______________ $ ______________ BEARING,BALL ,ANNULAR
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
FOB: ORIGIN DELIVERY DATE: 41 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C UNIT CONT:ZZ OPI:M INTRMDTE CONT:ZZ INTRMDTE CONT QTY:0 PACK CODE:Q PACKING LEVEL: B MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION, PACKAGING, PACKING, AND MARKING REQUIREMENTS SHALL BE IN ACCORDANCE WITH MIL-DTL-197M.
1. METHOD OF PRESERVATION SHALL BE DETERMINED BY BEARING TYPE AND SIZE (REFER TO TABLE I).
2. PARAGRAPH 3.10.2, SELECTION OF UNIT PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR PRESERVATIVE COMPOUND SHALL BE DETERMINED DEPENDENT UPON BEARING TYPE AND CLOSURE IN ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II. FOR PRESERVATION PROCESS CONTROLS, DEPENDANT UPON BEARING TYPE, CLOSURE, AND LUBRICANT<(>,<)> PARAGRAPHS 3.4 THROUGH 3.9 APPLY.
3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS OF PARAGRAPH 3.12.4 APPLY.
SPE4A6-27-Q-0293
SECTION B
SUPPLY/SERVICE: 3110-01-365-0555 CONT'D
4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE TO THE QUALITY ASSURANCE VERIFICATION REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF MIL-DTL-197M. ...END OF SPECIAL PACKAGING NSN/Part Number: 3110-01-365-0555 Quantity: 15 EA Purchase Request: 7018092479QTY: 15 Delivery: 41 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-27-T-098R
This fixed-price solicitation, number SPE4A6-27-T-098R, is for the procurement of one annular ball bearing (NSN 3110-01-278-6048) for delivery to the USS BAINBRIDGE DDG 96. The requirement specifies a delivery lead time of 20 days, with an original required delivery date of January 22, 2026. Inspection and acceptance will occur at the destination. The procurement is subject to strict domestic sourcing restrictions under DFARS 252.225-7016, requiring that the bearing be manufactured in the United States, its outlying areas, or Canada, with the cost of domestic components exceeding 50% of the total component cost. Contractors must provide a declaration regarding the domestic or foreign nature of the material to be considered for award. Technical and quality requirements are governed by the DLA Master List, with specific preservation, packaging, and marking standards mandated by MIL-DTL-197M, MIL-STD-129, and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury or mercury-containing compounds to hardware or supplies. Quality assurance is managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance acceptance standard for sample lots. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment processing. Cybersecurity compliance is required per DFARS 252.204-7012, and the solicitation incorporates standard FAR and DFARS clauses regarding covered defense information and telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PLATE, RETAINING, BEA
Solicitation # SPE4A6-27-T-098M
This solicitation, issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division, is for the procurement of one bearing retaining plate (NSN 3110014865951), identified as a critical application item. The requirement specifies a delivery timeline of five days after order, with FOB Origin terms and inspection and acceptance occurring at the origin. The item must be manufactured by Honeywell International Inc. or Honeywell Aerospace US LLC under part number 3161634-1, adhering to TDP Rev A Gen 1 and QAP 13873 standards. A critical requirement of this acquisition is the restriction on ball and roller bearings per DFARS 252.225-7016. Awards are limited to bearings manufactured in the United States, its outlying areas, or Canada, with a requirement that the cost of components manufactured in these regions exceeds 50% of the total component cost. Offerors must provide a signed Contractor's Declaration regarding the domestic or foreign nature of the material to be considered for award. Additionally, the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Packaging and preservation must strictly follow MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129, with specific palletization requirements per RP001. The contract incorporates several federal and defense regulations, including the Buy American and Balance of Payments Program, cybersecurity safeguarding for covered defense information, and HUBZone price evaluation preferences. Quotations must be submitted to the issuing office by November 24, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-27-T-096F
This solicitation, issued by the DLA Weapons Support ASC Commodities Division under number SPE4A6-27-T-096F, is for the procurement of two annular ball bearings (NSN 3110-00-540-9890). This is a source-controlled, critical application item that must be manufactured and tested according to cited limited rights data. Approved sources include New Hampshire Ball Bearings Inc and MRC Bearings. Due to strict domestic sourcing restrictions under DFARS 252.225-7016, the bearings must be manufactured in the United States, its outlying areas, or Canada, with the cost of components from these regions exceeding 50% of the total component cost. A contractor's declaration regarding the domestic or foreign nature of the material is required for award consideration. The contract specifies FOB Origin delivery to DLA Dist San Joaquin in Tracy, California, with a required delivery date of October 31, 2027. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Packaging and preservation must adhere to MIL-DTL-197M and MIL-STD-129, with specific prohibitions against the intentional addition of mercury. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various DFARS cybersecurity and safeguarding regulations, including DFARS 252.204-7012.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS