BEARING, PLAIN, ROD E

The contract is for the procurement of 13 plain rod end bearings with NSN 3120-00-541-0136, under solicitation SPE4A6-26-T-06XS, issued by the Defense Logistics Agency Aviation, Commodities Division. The item must be supplied by either Honeywell International Inc. (Part Number 112133) or Roller Bearing Company of America, Inc. (Part Number FTM34-10), adhering to Technical Data Package Rev A Gen 1 in accordance with QAP 13873 QAP-B02 Revision B dated December 11, 2013. All Class 3A and 3B threads are required to be gaged per SAE AS8879 Category 1 or MIL-S-7742 for safety-critical threads, excluding self-locking nuts and threads smaller than .190 inch internal or .138 inch external diameter. The solicitation incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by 'R' or 'I' numbers, and mandates full compliance with MIL-DTL-197M for preservation, packaging, packing, and marking, including adherence to MIL-STD-2073-1E and MIL-STD-129. Preservation methods are determined by bearing type and size, with protective lubricants selected according to bearing closure and referenced tables. The contractor’s packaging facility must meet quality assurance verification standards per Section 4 of MIL-DTL-197M, and palletization must follow DLA Packaging Requirements for Procurement. Items must be marked per MIL-STD-129 with special marking code ZZ-ZZ and labeled in compliance with the Hazard Communication Standard (29 CFR 1910.1200) for any hazardous materials, unless exempted by specific federal statutes. Delivery is required FOB Origin within 17 days to Tinker AFB, Oklahoma, with zero variance in quantity. Inspection and acceptance occur at destination, with the manufacturer’s inspection system required to comply with SAE AS9003 or ISO 9001 tailored to AS9003. The contract includes mandatory clauses addressing cybersecurity (DFARS 252.204-7012, NIST SP 800-171), whistleblower rights, conflict