Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, PLAIN, SELF-ALI

Active
SPE4A6-26-T-22PWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 575 units of self-aligning plain bearings, identified by NSN 3120-01-600-4614. The item is classified as a critical application commercial item with approved part numbers from New Hampshire Ball Bearings Inc, SKF (U.K.) Limited, and SKF USA Inc. Delivery is required within 162 days, with a need ship date of February 12, 2027, and a final required delivery date of August 16, 2027. The agreement specifies that inspection and acceptance will occur at the origin, with delivery terms set as FOB Origin. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 for marking is mandatory. The contract incorporates several technical and quality requirements, including those for measuring and test equipment and the handling of covered defense information, while noting that item unique identification is not required. Shipping is directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

General Info

Procurement of 575 self-aligning plain bearings for delivery by August 16, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-22PW.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
DIJAHNE MCPHERSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,PLAIN,SELF-ALIGNING
BEARING, PLAIN, SELF-ALIGNING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
NEW HAMPSHIRE BALL BEARINGS INC 15860 P/N 7-511511169-001
SKF (U.K.) LIMITED K5269 P/N 11-13281P
SPE4A6-26-T-22PW
SECTION B
SKF USA INC. 80201 P/N 7-511511169-001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017913097 0001 EA 575.000
NSN/MATERIAL:3120016004614
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A6-26-T-22PW
SECTION B
PR: 7017913097 PRLI: 0001 CONT’D
Need Ship Date:02/12/2027 Original Required Delivery Date:08/16/2027
SPE4A6-26-T-22PW NSN/Part Number: 3120-01-600-4614 Quantity: 575 EA Purchase Request: 7017913097QTY: 575 Delivery: 162 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A0-26-T-4497
This contract is for the procurement of one thrust washer bearing, identified by NSN 3120-01-385-4627 and part number 9306-46 from Highland Engineering, Inc. The order is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4497. Delivery is required within five days after receipt of the order, with a required delivery date of August 21, 2026. The agreement specifies that the item must be delivered FOB Origin and will be inspected and accepted at the destination, which is Fort Campbell, Kentucky. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. The shipment must be sent via the fastest traceable means, and the contractor is prohibited from using parcel post.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-19DG
This contract is for the procurement of 16 sleeve bushings under solicitation SPE4A6-26-T-19DG for the Department of Defense. The items are identified by NSN 3120-00-618-1294 and are designated as critical application items. Delivery is required within 171 days after order, with a need date of February 14, 2027, and a final required delivery date of March 15, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions. Quality control is emphasized through inspection and acceptance at the origin, and the contractor must comply with the Technical Data Package Rev A and associated quality assurance plans.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-19NU
This contract is for the procurement of 49 sleeve bearings under solicitation number SPE4A6-26-T-19NU for the Department of Defense. The items are identified by NSN 3120015005299 and must adhere to specific technical and quality requirements, including the use of TDP Rev A Gen 1 and reference QAP 13873. The contract specifies that the items must be identified for Electric Boat Corporation and Kamatics Corporation. Delivery is required within 171 days, with a need ship date of February 14, 2027, and a final required delivery date of June 7, 2027. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Strict compliance is required regarding packaging standards, including MIL-STD-2073-1E and MIL-STD-129, and a total prohibition on the intentional addition of mercury or mercury-containing compounds in the hardware or packaging.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-24DU
This solicitation is for the procurement of 104 sleeve bushings under NSN 3120-01-687-7942 for the Department of Defense. The contract requires strict adherence to the cited drawing and part number for configuration control, with item identification following MIL-STD-130N. Delivery is required within 106 days after order, and the item is subject to inspection and acceptance at the origin. The agreement incorporates several DLA master technical and quality requirements, including specific packaging standards and configuration change management. Notably, the technical data is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-23US
This contract is for the procurement of 307 sleeve bushings under NSN 3120-01-312-1814, identified as a critical application item. Manufacturing may require specific casting or forging and specialized tooling, which the government may not provide. The technical specifications are governed by NAS538 Revision 11 and QAP 13873, with quality and technical requirements adhering to the DLA Master List. Delivery is required within 171 days, with a need ship date of February 23, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is mandatory, and inspection and acceptance will occur at the point of origin. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-24DR
This solicitation is for the procurement of seven annular ball bearings under solicitation number SPE4A6-26-T-24DR. A critical requirement of this contract is the domestic sourcing restriction, which mandates that the bearings must be manufactured in the United States, its outlying areas, or Canada. Additionally, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. The contract specifies a delivery timeframe of 247 days and requires adherence to strict packaging, preservation, and marking standards, including MIL-STD-129 and MIL-DTL-197M. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with inspection and acceptance occurring at the origin. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-24ED
This contract is for the procurement of eight sleeve bearings, identified by NSN 3120-01-303-2874 and part number MS17795-130. The items must adhere to technical specifications ASTM-B438 and MIL-B-5687D, with delivery required within five days after the order. The shipment is destined for the McAlester Army Ammo Plant in Oklahoma and must be sent via the fastest traceable means, excluding parcel post. The agreement mandates strict compliance with DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware or packaging. Quality assurance will be managed through sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-24EK
This contract is for the procurement of eight sleeve bushings, identified by NSN 3120015324324 and Northrop Grumman part number 3671200U08010-3. The order is issued under solicitation SPE4A6-26-T-24EK with a required delivery date of August 20, 2026, and a delivery window of 20 days. The items are to be delivered FOB destination to DLA Distribution Sigonella in Italy. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Additional compliance requirements include the removal of government identification from non-accepted supplies and specific bare item marking.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, SELF
Solicitation # SPE4A6-26-T-24FQ
This contract is a solicitation for one self-aligning roller bearing, specifically part number NU307E.TVP2 from FAG Bearings Corporation, identified by NSN 3110015764423. The requirement mandates a delivery period of 10 days with FOB Origin shipping and destination inspection and acceptance. A critical requirement of this procurement is the domestic sourcing restriction, which stipulates that the bearing must be manufactured in the United States, its outlying areas, or Canada. Furthermore, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the material to be considered for award. Packaging, preservation, and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M standards.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-24DQ
This contract is for the procurement of two thrust washer bearings, identified by NSN 3120-01-624-2150 and part number BL-11684-2. The Technical Data Package is restricted to Breeze-Eastern LLC as the identified source, with Triman Industries Inc listed as an approved distributor. Delivery is required within 106 days, with a need ship date of December 20, 2026, and shipment is directed to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement incorporates several DLA master list technical and quality requirements, including specific mandates for physical identification, bare item marking, and measuring and test equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Inspection and acceptance will occur at the origin, and the contract specifies a zero percent quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, NEEDLE
Solicitation # SPE4A6-26-T-24AR
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 93 needle roller bearings under NSN 3110-00-903-1493. The contract requires delivery within 362 days after receipt of order and is categorized under NAICS code 332991. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality standards as outlined in the DLA Master List, including specific requirements for source approval documentation, packaging, and the removal of government identification from non-accepted supplies. Additionally, the contract contains export-controlled technical data governed by ITAR and EAR regulations. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DOD export-control training.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
PISTON PIN BEARING
Solicitation # SPE4A6-26-T-23VF
This contract is a solicitation for 16 piston pin bearings, identified by NSN 3110-01-562-8588 and part number 037156 from Sauer Compressors USA, Inc. The items are designated as critical application items and must be delivered within 171 days. The procurement is subject to strict domestic sourcing restrictions, requiring the bearings to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered. The contract incorporates various DLA technical and quality requirements, including specific standards for source approval, covered defense information, and measuring and test equipment. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware. Packaging, preservation, and marking must comply with MIL-STD-129, MIL-DTL-197M, and RP001 requirements. Inspection and acceptance will take place at the destination, with delivery terms set as FOB Origin.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
Supplier of Aircraft Safety Belts (NSN 1680012772876, P/N FDC-6400-145)This subcontract through the Department of Defense ASC Commodities Division requires the supply of aircraft safety belts, identified by part number FDC-6400-145 and NSN 1680012772876. The order quantity ranges from 95 to 566 units, which are classified as critical application items. The supplier must ensure all units are compliant with MIL-STD-130N marking standards and meet CMMC Level 2 cybersecurity requirements. Interested parties must submit their responses by September 7, 2026, under NAICS code 336412.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-24EE
This contract is for the procurement of 200 internal wrenching bolts, identified as NSN 5306002065812 and part number MS20006-24. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the applicable part standards, specifically NASM20004 through NASM20024. Delivery is required within 5 days after the order, with the shipping destination being the Poland FMS Consolidation point in Huntsville, Alabama. The agreement mandates strict quality and technical compliance, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Sampling and inspection will be conducted at the origin following MIL-STD-1916 or ASQ H1331, with specific gauging requirements for Class 3A and 3B threads. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements to ensure proper transport and identification.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-19CP
This solicitation is for the procurement of 683 turnlock fastener studs under solicitation number SPE4A6-26-T-19CP for the Department of Defense ASC Commodities Division. The items are identified as commercial products with a delivery requirement of 171 days after the order is placed. Performance is designated for Robins Air Force Base, and the contract falls under NAICS code 332510. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, including specific guidelines for physical item marking and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SL
Solicitation # SPE4A6-26-T-23UX
This contract is for the procurement of nine slotted hexagon self-locking nuts, identified by NSN 5310-00-047-2394 and part number MS21225-6. The items are classified as critical application items and must adhere to technical specifications including NASM21225 Revision 3 and MIL-DTL-32258. Delivery is required within 20 days, with the original required delivery date set for April 23, 2026. The shipment is to be handled via a freight forwarder in Jacksonville, Florida, for final delivery to the Commanding Officer at the RSNF Naval Supply Center in Jubail, Saudi Arabia. Quality and compliance are governed by DLA master lists, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and establishes the inspection and acceptance points at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UY
This contract is for the procurement of machine screws, specifically part number NAS517-3-18 under NSN 5305-00-515-7460. The order consists of four units with a delivery requirement of 20 days. The items are designated as critical application items and must adhere to technical data package specifications, including NAS517 Revision 8 and associated quality assurance provisions. Quality and inspection are managed at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA packaging requirements. The shipment is destined for the Fuerza Aerea de Chile in Santiago, Chile, via the CEVA Air and Ocean USA freight forwarder in Miami, Florida.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24AG
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-24AG, is for the procurement of 20 machine screws identified by NSN 5305-01-463-4131. The item is classified as a Commercial Off The Shelf product and must be delivered within 20 days after the order is received. The contract requires adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the supplier must ensure the removal of government identification from any non-accepted supplies. Responses to this solicitation are due by September 4, 2026, and the primary point of contact for this acquisition is Lisa Harvie.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-23YQ
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995017077985 and HII Unmanned Systems Inc part number 153176. The item is designated as a critical application item, and the government has specified that surplus materials are not acceptable. Delivery is required within 20 days of order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination in Virginia Beach, VA. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-based sampling approach for acceptance. Additionally, the contractor must comply with covered defense information regulations and specific requirements for the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-24EB
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995016290046. The item is associated with General Dynamics Information 58672 P/N 100349201-1 and Electric Boat Corporation 96169 P/N 218081352. Delivery is required within 106 days, with a need ship date of December 20, 2026, and an original required delivery date of April 5, 2027. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB origin terms and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. A critical environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific NAVSEA standards.
Other Building Material Dealers

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UZ
This contract is for the procurement of 379 machine screws under solicitation number SPE4A6-26-T-23UZ, identified by NSN 5305010945716. The items are designated as critical application items and are associated with part number SS5012-4-45 from approved sources including Sikorsky Aircraft Corporation, Hartford Aircraft Products, and Rotair Aerospace Corp. Delivery is required within 171 days, with a need ship date of February 23, 2027, and an original required delivery date of June 3, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and mandates adherence to the DLA Master List of Technical and Quality Requirements.
Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-23ZU
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of one plain hexagon nut under NSN 5310-01-692-1534. The delivery requirement is set for 20 days after order. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24CT
This contract is for the procurement of machine screws under solicitation SPE4A6-26-T-24CT, with a total quantity of 50 packages, each containing 100 pieces. The items are identified by NSN 5305-00-901-3782 and must adhere to specific technical standards, including NASM27039 Revision 6 and NASM7839 Revision 2. As a critical application item, the screws must meet strict gauging requirements for Class 3A and 3B threads per FED-STD-H28/20 and comply with MIL-STD-130N for physical identification and marking. Delivery is required within 20 days, with the original required delivery date set for May 21, 2025. The contract specifies FOB Origin for both inspection and acceptance. Packaging and palletization must follow MIL-STD-2073-1E and DLA packaging requirements, with final shipment directed to the RTN Air Wing in Thailand via the designated freight forwarder, FMS Logistics LLC. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and a Certificate of Quality Compliance is required.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-24AA
This contract is for the procurement of 246 retaining rings under solicitation SPE4A6-26-T-24AA for the Department of Defense. The items are identified by NSN 5325-00-205-4727 and must adhere to technical drawings 19207 7709323. Delivery is required within 75 days, with a need date of November 19, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The procurement is designated as a Critical Application Item and requires Tailored Higher Level Quality requirements, including source inspection. Quality assurance follows specific sampling methods such as MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-2073-1E and RP001. While certificate of conformance procedures are authorized, Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details