Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING,ROLLER,NEEDLE

Active
SPE4A626Q1293Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the roller needle bearing with NSN 3110-00-455-6188 and part number 114RS214-5. The request is a sources-sought notice, not a solicitation or commitment to award a contract, and responses are voluntary. Identified current suppliers include RBC Bearings Inc, Leonardo SPA Helicopters Division, and Industrial Tectonics Bearings, with the government requesting additional sources along with their locations and points of contact. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil by the deadline of August 26, 2026, with additional support available from Kee-Sha Epps-Eskridge. The notice is categorized under NAICS code 332991, and while the performance location is listed as Richmond, Virginia, the government has not imposed any set-aside requirements for small businesses or other categories.

General Info

U.S. Defense Logistics Agency seeks additional manufacturers of roller needle bearing NSN 3110-00-455-6188 by August 26, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Richmond, VA, 23297, USA

Set-Aside

NONE

Documents

(1)

SAR_Guidance.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts2 people available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
Matthew Diefes
contact@example.gov
+1 (555) 000-0000
Kee-Sha Epps-Eskridge
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

This is a request for information. Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR Country if applicable). Please also provide points of contact for these manufacturers if available. All of this information can be submitted to Matthew Diefes at matthew.diefes@dla.mil, phone 804-718-8776. This sources sought is for informational purposes only. This is not a request for proposal. It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to Award a contract as a result to this announcement. Any information submitted by respondents to this notice is strictly voluntary. We thank you in advance for your assistance. 



NSN 3110-00-455-6188



RBC BEARINGS INCORPORATED || 51588 || P/N 114RS214-5


LEONARDO SPA HELICOPTERS DIVISION || A0126 || P/N 114RS214-5


INDUSTRIAL TECTONICS BEARINGS || 06144 || P/N 114RS214-5

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2849
The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12VH
The contract pertains to the procurement of 161 units of a BUSHING,SLEEVE with NSN/Part Number 0001S00000052, under solicitation SPE4A6-26-T-12VH, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 403 days after contract award, and the place of performance is Robins AFB, Georgia. The solicitation closes on August 13, 2026, and is subject to technical and quality requirements referenced from the DLA Master List, with applicable revisions governed by the solicitation or award date depending on acquisition size. Packaging must comply with DLA specifications, and inspection and acceptance are to occur at the origin. Government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exclusion. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of required DLA training, and formal authorization. The contract is classified as a government first artic solicitation with no set-aside designation and falls under NAICS code 332991. Primary point of contact is Charleen Weber, reachable via email and phone as listed.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-12UL
The contract is for one BUSHING, SLEEVE with NSN 3120-01-433-2912 and part number 214-010-264-103, sourced from BELL TEXTRON INC, under solicitation SPE4A6-26-T-12UL. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and both inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and marking must conform to MIL-STD-129 with no special marking required. The item is destined for the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City, Taiwan, with freight forwarding details governed by DLA procedural notes. Technical and quality requirements are incorporated by reference from the DLA Master List, including tailored higher-level quality, inspection at origin, and measuring and test equipment standards. Item Unique Identification is not required per the requesting service’s directive. The delivery date is August 7, 2026, with the contract issued under DLA’s authorized unit of issue and subject to applicable DoD procurement rules.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-12UD
This contract solicits the procurement of an annular ball bearing under NSN 3110005299144 with a requirement for 39 units, to be delivered within 170 days FOB origin. The bearing must be manufactured exclusively in the United States, its outlying areas, or Canada, and the combined cost of its core components—rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50 percent of the total component cost. Contractors must submit a formal declaration affirming the domestic or foreign origin of materials, obtained via the designated DLA Foreign Bearing website, and failure to provide this documentation will disqualify the quote. If no compliant offers are received, the solicitation may be canceled or held pending a waiver request under DFARS provisions. Technical and quality standards are governed by MIL-DTL-197M for preservation and packaging, MIL-STD-2073-1E for packaging methods, and MIL-STD-129 for marking, with all packaging subject to DLA-specific requirements and inspection occurring at origin. The item is classified as a critical application item with specific physical marking requirements per TDP Rev A Gen 1 and QAP-13873, and mercury or mercury-containing compounds are strictly prohibited except in limited functional applications defined by NAVSEA, requiring secondary containment for portable devices. Unit of issue is each, price is $39.00 per unit, with zero variance allowed in quantity and no unique identification marking required per customer request. The solicitation number is SPE4A6-26-T-12UD, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of August 13, 2026, and is classified under NAICS code 332991. The place of performance is New Cumberland, PA, and all documentation must align with the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The contracting officer point of contact is Shalonda Davis, and the contract is subject to applicable defense information handling requirements. Preservation, packing, and labeling procedures must strictly follow referenced military standards, and the contractor’s packaging facility must pass quality assurance verification per MIL-DTL-197M Section 4.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
FILTER, LIGHT, PHOTOG
Solicitation # SPE8EN-26-T-2776
The contract pertains to the procurement of a photographic light filter with NSN 6760-01-519-0757 and part number 2602A001, supplied by Canon U S A Inc, Camera Division. A total of 33 units are required at a unit price of $33.00, resulting in a total contract value of $1,089.00. Delivery is to be made FOB origin within 167 days, with the original required delivery date set for December 23, 2026, and a need ship date of February 1, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 Packaging Requirements, and all technical and quality standards referenced by R or I numbers take precedence over applicable material specifications. The DLA Master List of Technical and Quality Requirements governs compliance, and the item does not contain Class I ozone-depleting substances. The delivery address is W1A8 DLA Dist San Joaquin, Tracy, CA, and transportation requirements must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE8EN-26-T-2776, issued on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332991, and all documentation must reference the authorized unit of issue as defined by DoD standards.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, SELF
Solicitation # SPE4A6-26-T-12VF
The contract is for the procurement of three roller self-bearing units with NSN part number 3110-01-285-9246 under solicitation SPE4A6-26-T-12VF, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 205 days of award, and the solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The item is classified under NAICS code 332991 and is subject to stringent quality and technical requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or their corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major unless otherwise directed. Inspection and acceptance occur at the manufacturer’s origin, and all measuring and test equipment must meet specified standards. The technical data associated with this bearing is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to the data is restricted to contractors holding current US/Canada Joint Certification Program certification, having completed mandatory DOD export-controlled data training and the DLA questionnaire, and been formally approved by the DLA controlling authority. Government identification must be removed from non-accepted supplies, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is NEW CUMBERLAND, PA, 17070-5002, with Katelyn Williams listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC EQUI
Solicitation # SPE8EN-26-T-2784
The contract pertains to the procurement of 22 units of photographic equipment cases under NSN 6760-01-593-2457, with a purchase request number of 7017757373 and a delivery deadline of 167 days after award. The solicitation number is SPE8EN-26-T-2784, issued on August 5, 2026, with responses due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, government identification must be removed from non-accepted supplies, and documentation for source approval requests is required. The item does not contain Class I ozone-depleting substances, and covered defense information may apply. The place of performance is New Cumberland, Pennsylvania, 17070-5002, and the contracting officer is Jennifer Esworthy, reachable via email or phone provided. The NAICS code is 332991, and the procuring agency is the Department of Defense under the Construction & Equipment T & IFO EQ office.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRF
Solicitation # SPE4A5-26-T-331L
This solicitation requires the procurement of a roller bearing designated as BEARING, ROLLER, AIRF with NSN 3110-01-662-3661, with a total quantity of nine units to be delivered within 154 days. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, and the cost of all bearing components—including rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50% of the total component cost, as mandated by DFARS Clause 252.225-7016. A completed Contractor’s Declaration, obtainable from the DLA Foreign Bearing Waiver website, is mandatory for consideration; failure to submit this documentation will disqualify the quote. In the event no compliant offerings are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. The item is designated as a Critical Application Item and must comply with Federal Aviation Administration airworthiness requirements, including the submission of a Certificate of Airworthiness and Conformance. Technical and quality requirements are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Packaging and preservation must adhere strictly to MIL-STD-2073-1E and MIL-DTL-197M, with specific preservation methods determined by bearing type and closure, and protective compounds selected according to prescribed tables. Marking must follow MIL-STD-129, and palletization must comply with DLA packaging standards. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Supply chain traceability documentation is required as per DLA Directive Procurement Note C03, and contractors must retain all related records. Configuration change management, removal of government identification from non-accepted items, and FAA bare item marking requirements are also applicable. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The unit of issue is each, with a total price of $9.00 per unit, and the order is being procured by the Department of Defense under Solicitation SPE4A5-2
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-12VL
The contract solicits 42 flanged bushing sleeves identified by NSN 3120-00-857-9742 under solicitation SPE4A6-26-T-12VL, with a response deadline of August 13, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior approval from the Department of State or Commerce, and DFARS 252.225-7048 applies to all handling of the technical data. Contractors must hold approved US/Canada Joint Certification Program status, complete mandatory DOD export control training, and be authorized by DLA to access controlled information. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. The acquisition falls under NAICS code 332991 and is managed by the Department of Defense’s ASC Commodities Division, with primary point of contact Kameron Heningburg.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-12VJ
The contract pertains to the procurement of 16 units of a bushing sleeve with NSN/Part Number 0001S00000052, under solicitation SPE4A6-26-T-12VJ, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 395 days after award, and the item is subject to multiple technical, quality, and regulatory requirements, including those detailed in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The specification incorporates tailored higher-level quality standards applicable to both manufacturers and non-manufacturers, inspection and acceptance at the origin, and mandatory compliance with DLA packaging guidelines. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce; only contractors certified under the US/Canada Joint Certification Program and who have completed mandated DLA training may access this data. Item Unique Identification is not required per the service customer’s request, and government identification must be removed from non-accepted supplies. The place of performance is Robins AFB, Georgia, with Charleen Weber as the primary point of contact, and responses are due by August 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the sleeve bearing with NSN 3110-01-341-6408, previously sourced from KATO ENGINEERING INC. with part number 012-63499-54. This request is purely for market research and does not constitute a solicitation, proposal, or binding commitment from the government. Respondents are asked to identify any sources that can manufacture the item, including the manufacturer’s location by city and state or country, and to provide contact information if available. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil or via phone at 804-718-8776, with responses due by August 12, 2026. Participation is entirely voluntary, and no contract award is guaranteed based on the information received. The solicitation is categorized as a sources-sought notice under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing, and carries no set-aside preferences. It is posted under solicitation number SPE4A6326Q1284 with a primary point of contact at DLA Aviation’s office in Richmond, Virginia, and a secondary contact available for follow-up. The place of performance is also listed in Richmond, Virginia. The notice explicitly states that responses are not offers and the government has no obligation to proceed with procurement as a result of the information gathered. Interested parties are encouraged to submit details by the deadline to assist in identifying potential suppliers for future procurement planning.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
"NSN 1680-01-540-1829, CARGO DOOR ASSEMBLY, WSDC: YLN, HELICOPTER, SEAHAWK, H-60.”
Solicitation # SPE4A526R0284
The U.S. Department of Defense, through DLA Aviation’s Weapons Support office in Richmond, Virginia, is conducting market research to identify qualified vendors capable of manufacturing the Cargo Door Assembly with NSN 1680-015401829 and part number 70207-22201-064. This effort seeks entities with the technical, financial, and operational capacity to perform full-scale new manufacture including component fabrication, inspection, testing, preservation, packaging, and shipping, as well as manage complex supply chain logistics, mitigate diminishing manufacturing sources, and handle long-lead procurement challenges. The associated NAICS code is 336413, and the estimated requirement is for ten units, with no existing technical orders or qualification documents available. The government has identified Sikorsky Aircraft Corporation as an approved source but is exploring additional competitors to inform future procurement strategy, which may include setting aside the contract for small businesses or pursuing full and open competition with possible multiple award outcomes. Responses are voluntary and do not constitute a solicitation, with no financial reimbursement for submission costs. Interested parties must provide organizational details including size, ownership type, contact information, website, and tailored capability statements substantiating their ability to meet program demands such as schedule adherence, cost control, performance tracking, key personnel retention, and risk mitigation under a performance-based acquisition model. Subcontracting or teaming arrangements must be clearly outlined with governance structures. All submissions must be emailed to Samuel Kogi at Samuel.kogi@dla.mil no later than August 10, 2026, and no phone inquiries or feedback on submissions will be accepted. Organizations seeking to become an approved source must submit a Source Approval Request via DoDSafe by emailing dlaavnsmallbus@dla.mil with the required CAGE code, NSN, and contact email to receive the secure submission link.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
NSN: 1560-005743457, EJECTOR ASSEMBLY, WI, WSDC: 06F, AIRCRAFT, HERCULUS C-130
Solicitation # SPE4A726R0756_SourcesSought
The Defense Logistics Agency Aviation is conducting market research to identify qualified entities capable of manufacturing or legitimately obtaining the Ejector Assembly, WI, identified by NSN 1560-005743457 and Weapon System Designator Code 06F, which is used on the Hercules C-130 aircraft. Currently, this item is supplied exclusively by Arrowhead Products Corp, Senior Operations LLC, and Lockheed Martin Corp under part number 351781. The agency is not seeking proposals or binding offers through this notice but is instead gathering information to evaluate potential new sources to ensure continued supply chain resilience. Any interested party wishing to be considered as an approved source must submit a complete Source Approval Request (SAR) package in accordance with the guidelines outlined in the Aviation Source Approval and Management Handbook, demonstrating that their product meets or exceeds the quality, performance, and technical specifications of the existing approved item. Responses to this sources sought notice must be submitted by August 10, 2026, at 8:00 a.m. Eastern Standard Time, to Tatjana Klemmer at tatjana.klemmer@dla.mil. No funds are available for the preparation of responses, and submission does not obligate the government to award a contract. The contracting office is located at 6090 Strathmore Rd., Richmond, VA 23237, and the North American Industry Classification System code for this effort is 336413, which pertains to aircraft manufacturing. Candidates are reminded that the SAR process can take more than 180 days for review and requires thorough documentation of technical capability, quality control, and compliance with applicable defense standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332991
New
Federal
BEARING,PLAIN,ROD END
Solicitation # SPE4A6-26-Q-1291
The government is seeking information on manufacturers capable of producing the plain rod end bearing with NSN 3120-01-417-0135, currently associated with part numbers LB6-1034-25-1 from LORD CORP and SB7111-101 from SIKORSKY AIRCRAFT CORPORATION. Respondents are requested to identify any sources with manufacturing capability for this item and provide the manufacturer’s location by city and state or country, along with contact information if available. This request is strictly for informational purposes under a sources-sought notice and does not constitute a solicitation, proposal request, or binding commitment from the government. All submissions are voluntary and will not obligate the government to award a contract. The activity is administered by DLA Aviation out of Richmond, Virginia, with Matthew Diefes as the primary point of contact for responses, which must be submitted by August 26, 2026. The solicitation is designated as a Small Business Set Aside – Total under NAICS code 332991.
Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336412
New
Federal
NSN 2915-01-313-4615, BYPASS INDICATOR, WSDC: 26F
Solicitation # SPE4A726R0755_SourceSought
The Department of Defense, through DLA Aviation, is conducting market research to identify qualified suppliers capable of manufacturing the bypass indicator identified by NSN 2915-01-313-4615 and part number TD221MF0DCY5. This effort is not a solicitation and no contract award will result from this request. The government seeks capability statements from organizations that can perform the full scope of new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of material shortages. The NAICS code 336412 applies, and the requirement spans a five-year base period with no options. Currently, Pall Aeropower Corp is the approved source, and any other vendor must submit a Source Approval Request to be considered. Responses must include organizational details, capability documentation, and information on subcontracting or teaming arrangements, with no financial liability assumed by the government for submission costs. All submissions are due by August 10, 2026, and must be emailed to TATJANA.KLEMMER@DLA.MIL. The government will use responses to determine whether to set aside the eventual contract for small businesses or pursue full and open competition, potentially making multiple awards. The DLA does not hold complete technical data on the part, further emphasizing the importer for suppliers to demonstrate technical and operational competency. No telephone inquiries will be accepted, and no feedback or evaluations will be provided on submissions. Interested parties should note that the place of performance is undetermined and final unit pricing will be established at contract award time. Questions regarding this market research should be directed to TATJANA.VAUGHAN@DLA.MIL.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
Federal
5975-014506278 MOUNTING BASE, TIEDO ATF
Solicitation # SPE4A726R0742
The solicitation for Mounting Base, Tiedo ATF under contract number SPE4A726R0742 is a presolicitation issued by the Defense Logistics Agency Aviation, with a firm fixed price structure for a quantity of 4,800 units, delivered FOB origin with inspection and acceptance at destination. The item is critical to application and only two approved sources are recognized: General Dynamics Mission Systems, Inc. with part number 86-1326374-2 and Panduit Corp with part number ABM2S-S6-D. The final award will consider price, past performance, and other evaluation criteria detailed in the complete solicitation. The solicitation will be publicly accessible via the DLA Internet Bid Board System on or around August 18, 2026, with responses due by September 18, 2026, and will only be available in PDF format requiring Adobe Acrobat Reader. The NAICS code is 335999, and the place of performance is in Richmond, Virginia, with primary point of contact Angela Haden and secondary contact Leslie Adams. The posting date is August 5, 2026, and the response deadline listed in the data is August 17, 2026, at 6:30 PM EST.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
Federal
BEACON,SONAR
Solicitation # SPE4A726R0630
The Defense Logistics Agency is conducting market research through a sources sought notice to identify qualified parties capable of manufacturing the sonar beacon identified by NSN 5845-01-643-2316 and part numbers DK120-90 and DK120/90. This effort requires full new manufacture of the item, including procurement and production of component parts, inspection, testing, preservation, packaging, and shipping, along with supply chain management responsibilities such as logistics planning, production forecasting, long-lead part procurement, and mitigation of diminishing manufacturing sources and material shortages. The agency has identified two approved sources, Radiant Power Corp and Dukane Seacom, Inc., but is assessing broader market capacity to determine whether the requirement will be set aside for small businesses or opened to full and open competition. No solicitation exists at this time, and submissions are voluntary, with no financial liability assumed by the government for respondents’ costs. Drawings, technical orders, and qualification requirements are not available, and respondents must demonstrate their ability to deliver under a performance-based service acquisition contract with strong project management capabilities, including adherence to tight schedules, cost control, performance tracking, personnel retention, and risk mitigation. Organizations must submit their name, address, contact details, ownership structure, and tailored capability statements with supporting documentation, including details on any subcontracting or teaming arrangements. Responses are due by June 3, 2026, and must be emailed to Montana.Kipp@dla.mil. The North American Industry Classification System code for this requirement is 334290, and the contracting office is located in Richmond, Virginia. No feedback, evaluations, or telephone inquiries will be provided, and the unit price will be determined only upon contract award, with estimated quantities ranging from a minimum of 135 units to a maximum of 521 units.
Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336413
New
Federal
SPE4A726R0561
Solicitation # 1680016276027
The solicitation numbered SPE4A726R0561 is a non-commercial, firm fixed price procurement under FAR Part 15, seeking surplus or newly manufactured plenum assemblies with NSN 1680016276027, approved for source The Boeing Company. Only surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory are invited to respond, requiring completion of the DLAD 52.211-9000 surplus certificate or equivalent traceability documentation to confirm product acceptability. Responses must include available quantities and pricing, and the government reserves the right to adjust its acquisition strategy based on the availability of surplus or newly manufactured inventory if it serves best interest. The contract will be awarded unrestricted with FOB Origin terms, inspection and acceptance occurring at destination, and an anticipated delivery requirement of 315 days after receipt of order. The solicitation will be issued electronically through the DIBBS website with no paper copies available, requiring Adobe Acrobat Reader for access. The response deadline is August 25, 2026, and all submissions must align with the evaluation criteria of price, past performance, and other specified factors. The contracting office is located in Richmond, Virginia, and the primary point of contact is Tiffani Perry via email at Tiffani.Perry@dla.mil.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 20 days
View Details
New
Federal
No subcontract or supplier opportunities availableThere are no active subcontract or supplier opportunities available under this record, as it consists solely of a guidance template for supplier assessment used internally by DLA Aviation for qualification purposes. The document does not contain any statement of work, contract line item numbers, pricing details, or executable requirements, and thus cannot support any subcontract decomposition or procurement action. Although the record shows a posted date of August 4, 2026, and a response deadline of August 10, 2026, with the agency listed as DLA Aviation under the Department of Defense, no solicitation number, NAICS code, set-aside information, point of contact, or place of performance has been populated. This record serves only as a reference tool and does not represent an open or pending procurement opportunity.

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 493190
New
Federal
Preservation, Packaging and Shipping Services
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
Federal
Quality Control, Inspection and Testing Services
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423690
New
Federal
Component Procurement and Supply Chain Management
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details