BEARING, SLEEVE

The contract pertains to the procurement of a single sleeve bearing identified by NSN 3120-00-661-7939 and part number 2-108007-454-04 from Viking Pump, Inc., with exact dimensional specifications: inner diameter between 1.1285 and 1.130 inches, outer diameter between 1.439 and 1.440 inches, and overall length between 1.350 and 1.360 inches, with all corners square and concentricity within 0.003 total indicator runout. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and tailored higher-level quality provisions apply to both manufacturers and non-manufacturers. The item requires source inspection and must be marked in accordance with RQ017 for physical identification, with casting or forging likely needed for production, necessitating a Casting and Forging Assistance Request if the supplier lacks the required tooling or materials. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with unit packaging and marking following MIL-STD-129 without special markings, and palletization must comply with DLA guidelines. Delivery is required within five days FOB origin to a U.S. Navy facility in Sasebo, Japan, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE4A6-26-T-35A9, with a required delivery date of April 17, 2026, and is subject to the DLA’s unit of issue standards and transportation protocols as specified in DLAD procedural notes.