Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEARING, SLEEVE

Active
SPE4A6-26-T-09NTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a sleeve bearing identified by NSN 3120-01-419-0207 and part number MS17796-123, manufactured through a metal casting process requiring specialized tooling. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan. Critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Acceptance requires zero non-conformances unless otherwise stated. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and mercury compounds strictly prohibited in preservation or packaging. Palletization follows DLA packaging requirements. The contract specifies delivery of five units FOB origin within five days, with no variance allowed in quantity and inspection and acceptance occurring at origin. The item is sourced under solicitation SPE4A6-26-T-09NT, with a required delivery date of July 28, 2026, and must adhere to the ASTM B438 Revision 21 standard. Manufacturing support and tooling inquiries should be directed to the Aviation or Land & Maritime Supply Chains assistance teams. The contract is issued by the Department of Defense’s ASC Commodities Division, with point of contact Robye Dewitt.

General Info

Procure five sleeve bearings NSN 3120-01-419-0207, FOB origin, delivery by July 28, 2026, zero non-conformances.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09NT.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Robye Dewitt
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,SLEEVE
BEARING,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.
SPE4A6-26-T-09NT
SECTION B
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM B438 REVISION NR 21 DTD 04/01/2021 PART PIECE NUMBER: MS17796-123
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017618404 0001 EA 5.000
NSN/MATERIAL:3120014190207
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
PCN0CK
COMMANDING OFFICER
7 CFSD
195 AVENUE & 82 ST
EDMONTON AB T5J 4J5
CA
FREIGHT SHIPPING ADDRESS:
PCN0CK
COMMANDING OFFICER
7 CFSD
195 AVENUE & 82 ST
SPE4A6-26-T-09NT
SECTION B
PR: 7017618404 PRLI: 0001 CONT’D
EDMONTON AB T5J 4J5
CA
M/F: (TCN) PCN05462033851
RDD: 233
PROJ: TP 1
SUPP ADD: PCKJZS SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: F9B ADV: 2L FC: 48
Need Ship Date:00/00/0000 Original Required Delivery Date:07/28/2026
SPE4A6-26-T-09NT NSN/Part Number: 3120-01-419-0207 Quantity: 5 EA Purchase Request: 7017618404QTY: 5 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThe contract is for the procurement of 80 units of a ball annular bearing with NSN 3110-00-193-8528 under solicitation SPE4A6-26-T-09RN, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 162 days of award, with performance located at Tinker Air Force Base, Oklahoma. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must adhere to DLA specifications, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and the bearing must be physically marked per RQ017. Item Unique Identification is not required as specified by the service customer under DFARS 252.211-7003. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior federal authorization. Only contractors with approved JCP certification, completed DOD export training, and DLA approval may access such data, per DFARS 252.225-7048. The NAICS code is 332991, and the primary point of contact is Charleen Weber, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract pertains to the procurement of a bushing sleeve identified by part number NAS76A3-023 and NSN 3120011290722, classified as a critical application item requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item must comply with the basic non-government standard NAS76 Revision 11 dated 10/31/2018 and the quality assurance procedure QAP-13873 Revision B dated 12/11/2013. Inspection and acceptance occur at origin, with no tolerance for quantity variance. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 requirements, and all DLA technical requirements supersede ASTM standards. Unit of issue is each, with a total order quantity of 126 units split across three CLINs: one unit, thirteen units, and one hundred twelve units respectively. Delivery is FOB origin with a 169-day delivery window, and the original required delivery date is November 18, 2026, with a need ship date of January 20, 2027. The item does not require Unique Item Identification per customer request. The contract is issued under solicitation SPE4A6-26-T-09PK by the Department of Defense’s ASC Commodities Division and is to be delivered to three DLA distribution points: Cherry Point NC, Hill AFB UT, and San Diego CA, each with specified shipping addresses. All documentation and compliance are governed by DLA procedures, including transportation protocols C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARINGThis contract pertains to the procurement of a bearing identified by NSN 3120-01-106-7293 and part number 3120PL0731769, with a single unit quantity required to be delivered within ten days to Fort Bliss, Texas. The item is designated as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issuance date. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The bearing must be packaged and preserved in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping material, and packaging codes, with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with corresponding verification levels or AQLs. Physical identification and marking requirements are enforced, and unit of issue is each (EA). The item is not required to have Item Unique Identification under DFARS 252.211-7003(c)(1)(i). The shipment must be sent via the fastest traceable means, excluding parcel post, and directed to a U.S. Army distribution unit at Fort Bliss under a designated military freight address and shipment control number. The procurement is governed under a federal contract issued by the Department of Defense, with Christian Ray as the primary point of contact, and the response deadline is set for August 3, 2026, with a required delivery date of May 14, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
CAP, PILLOW BLOCKThis contract pertains to the procurement of one pillow block cap, identified by NSN 3130-01-381-9844 and part number 2650-3536, supplied by Electric Boat Corporation. The item is designated as a critical application component and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Mercury and mercury-containing compounds are strictly prohibited in the item itself, its packaging, preservation, and marking except for specific exempted uses such as batteries, fluorescent lights, and certain instruments, with additional containment requirements for those exceptions as defined by NAVSEA 5100-003D. The product must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with a palletization code U and no special marking. Packaging materials must not contain mercury, and the item must be shipped via traceable freight, explicitly forbidding parcel post delivery. Delivery is FOB origin within 20 days of contract award, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the required delivery date is January 2, 2026. The item is not subject to Item Unique Identification per Service customer request, and all contractual obligations are governed by DLA packaging and environmental compliance protocols. The contracting office is the ASC Commodities Division under the Department of Defense, with delivery directed to the Naval Sea Logistics Center warehouse in Mechanicsburg, Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVEThe contract is for 177 units of a sleeve bearing with NSN/Part Number 3120-01-491-2863, issued under solicitation SPE4A6-26-T-09PE by the Defense Logistics Agency’s ASC Commodity Division. Delivery is required within 169 days from award, with performance location in New Cumberland, Pennsylvania. The item is subject to stringent technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 certification for the vendor as a certified third-party assessment organization, physical identification and bare item marking requirements, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at the manufacturer’s origin, and any non-accepted supplies must have government identification removed prior to return. Technical data associated with this item is controlled under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with an approved U.S./Canada Joint Certification Program credential, completed DOD export-controlled data training, and DLA-approved access may handle the controlled technical information. Packaging must adhere to DLA procurement standards, and all measuring and test equipment used in production must meet specified calibration and verification requirements. The solicitation opened on July 26, 2026, with responses due by August 3, 2026, and is classified as a federal procurement under NAICS code 332991.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
COLLAR, BEARINGThe contract outlines the procurement of a collar bearing with part number HS700575 and NSN 3110-01-734-2811, for a quantity of 205 units, under solicitation SPE4A6-26-T-09SH. Delivery is required within 335 days FOB origin, with no variance allowed in quantity. The item must comply with DLA’s technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and MIL-DTL-197M, which dictate preservation methods based on bearing type and closure, selection of protective lubricants, and quality assurance verification procedures. Packaging and marking must adhere to MIL-STD-129, with palletization following DLA-specific requirements. Preservation methods and protective compounds are strictly governed by technical tables within MIL-DTL-197M, and the contractor’s packaging facility must meet associated quality verification standards. Unit identification is not required per the service customer’s request, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at destination, with all packaging data specified in detail, including preservation methods, wrapping materials, and containment protocols. The contract is issued by the Department of Defense’s ASC Commodities Division, with performance at New Cumberland, PA, and contact managed by Marion Williams.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
LINER, BEARING HOUSIThe contract is for one unit of a liner, bearing housing with NSN 3130-01-705-7089 and part number 363-20279, issued under solicitation SPE4A6-26-T-09SP. Delivery is required within 20 days to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591, with FOB destination as the delivery point and inspection and acceptance also occurring at destination. The item is subject to stringent packaging requirements per MIL-STD-2073-1E and marking compliance with MIL-STD-129, and must be palletized according to DLA packaging standards. No special marking is required, and unit identification through Item Unique Identification is explicitly waived by the service customer. The contract incorporates technical and quality requirements referenced in the DLA Master List, including tailored higher-level quality standards, measuring and test equipment protocols, and documentation rules for source approval. Transportation must utilize the fastest traceable method, excluding parcel post, and shipments are to be coordinated through the VSM system with RDD 777. The supplier must comply with DLA procedures for defense information handling, government identification removal for non-accepted items, and all applicable DFARS clauses. The original delivery date is July 17, 2026, with no variance allowed in quantity, and the contract is active under the Department of Defense, administered by the ASC Commodities Division with primary point of contact Alexis Dunnavant.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract is for a single bushing, sleeve with NSN 3120-01-500-4989, issued under solicitation SPE4A6-26-T-09SN by the Defense Logistics Agency’s ASC Commodities Division. The requirement is for delivery within 20 days of award and is subject to stringent technical and quality controls referencing the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and solicitation timeline. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization, and packaging must adhere to DLA standards. Inspection and acceptance occur at the manufacturer’s origin, and any non-accepted items must have all government identification removed. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including employees of U.S. companies and subsidiaries, and requires prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, having completed DLA-specific export control training and questionnaire, and receiving formal approval. Measuring and test equipment used in production must meet specified standards, and the item is classified under NAICS code 332991 with a federal procurement type. The point of contact for inquiries is Alexis Dunnavant, with responses due by August 3, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract specifies the procurement of two BUSHING, SLEEVE units with NSN 3120-01-141-0889 and part number KR-2 from TE Connectivity Corporation, under solicitation SPE4A0-26-T-4058. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled in strict accordance with MIL-STD-129 and DLA Packaging Requirements. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with palletization following RP001 guidelines. Items are to be shipped via the fastest traceable means, explicitly excluding parcel post, to the freight shipping address at Robins AFB, Georgia. The required delivery date is July 22, 2026, and the contract includes specific government-use identifiers and contact information for Danita Davis at DLA. The item is classified under NAICS code 332991 and is part of a federal acquisition administered by the Department of Defense’s Aviation Supply Chain ESOC Buys office.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SELF-AOfferors must comply with strict regulations regarding the supply of covered telecommunications equipment and services, as prohibited under FAR 52.204-24 and DFARS 252.204-7016, and are required to certify that no such equipment or services will be provided under this contract. Domestic material restrictions apply under the Berry Amendment, the Buy American Act, and related clauses, with the Berry Amendment threshold lowered to $150,000; vendors using non-domestic materials must disclose this information in their quote or via written notification. Small business joint ventures must submit required representations for eligibility under designated small business categories. The use of additive manufacturing for parts is expressly prohibited unless specific prior approval is granted by the contracting officer. Offerors are strongly encouraged to quote quantity ranges due to the volatile and fluctuating nature of open purchase requests, allowing buyers flexibility to consolidate or reduce quantities without re-solicitation, though this does not apply to Auto IDC. All contractors must register via the upcoming DLA Account Management & Provisioning System to access the Vendor Shipment Module and maintain shipping capability; those using VSM WebServices must update their internal schema by the stated deadline to avoid service disruption. Failure to submit a “No Bid” response on DIBBS for anticipated non-participation may result in assumptions of non-procurability and unnecessary administrative follow-up. The solicitation is for a plain self-aligning bearing, NSN 3120-01-358-6618, quantity 37 units, with a 28-day delivery requirement, and responses are due by August 3, 2026, with inquiries directed to Justin Willcox. Fast Pay is not applicable, and all offers must include current dealer or distributor certification details.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULARThis contract specifies the procurement of 317 annular ball bearings under NSN 3110-00-155-8429, with a total price of $317.00 per unit and delivery required within 296 days FOB origin. The bearings are classified as commercial items and must be manufactured in the United States, its outlying areas, or Canada, with more than 50% of the total cost of all bearing components originating from these regions. A contractor declaration confirming the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide it will disqualify the bid. The item is designated as a critical application and is subject to stringent quality and packaging standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 for marking and preservation. Preservation methods must align with the bearing type and closure as specified in referenced technical documents, and the contractor’s packaging facility must meet quality assurance verification requirements. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like batteries or instruments, and any exempted items must include secondary containment. Inspection and acceptance occur at origin, and no unit identification is required per customer request. Packaging must adhere to DLA-specific requirements, and all materials must comply with restrictions outlined in DFARS 252.225-7016. The solicitation may be canceled if no acceptable domestic sources are found, unless a waiver is approved.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Manufacture and Delivery of Ruggedized Photographic Equipment CasesThe contract requires the manufacture, packaging, labeling, and delivery of custom 24-inch cube cases designed for the transport and protection of photographic and sensitive equipment, featuring pick-n-pluck foam interiors to securely hold delicate components. These cases must meet stringent military specifications including DLA requirements, MIL-STD-129 for labeling and packaging, and applicable hazardous materials communication standards to ensure safe handling and compliance during military logistics operations. The fabrication process demands precision in foam customization, durable case construction, and accurate labeling to support inventory control and field deployment under demanding conditions. Delivery is to be made to Lakeland, Florida, with a zip code of 33811, and the work is classified under NAICS code 332991 for other fabricated metal product manufacturing. This is a subcontract opportunity posted by the Department of Defense under the Construction & Equipment T & IFO EQ office, with a response deadline set for July 29, 2026, and the solicitation initially published on July 24, 2026. All parties must adhere to the outlined technical and regulatory standards without deviation, ensuring full interoperability with existing military supply chains and transportation protocols.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThe contract pertains to a special purpose electrical cable assembly identified by part number SFV.L01.47 and NSN 5995-01-727-7502, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced specifically by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item is classified as a critical application item, requiring strict quality controls. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted in the sample lot unless otherwise stipulated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is due within 150 days from the order date, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no quantity variance permitted. Transportation guidelines are referenced under DLAD Proc Notes C19 and C20, and the freight destination matches the parcel post address. The contract was issued under solicitation SPE4A6-26-T-09SX, with a response deadline in August 2026 and a required ship date of January 1, 2027, and original delivery date of April 29, 2027. Documentation for source approval, removal of government identification from rejected items, and compliance with all referenced standards is required, and the point of contact for inquiries is Angela Boyce of the Department of Defense’s ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALLThe contract is for the procurement of 186 units of a spacer, ball item with NSN 1440-00-961-5057 and part number 29-13703-3, sourced under solicitation SPE4A6-26-T-09RU. Delivery is required FOB origin within 117 days from the contract award, with a mandatory ship date of November 29, 2026, and an original delivery deadline of December 4, 2027. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and no government identification may be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at destination. Quality assurance is governed by tailored and non-tailored higher-level requirements, including ISO 9001:2015 for both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 specifications. The item does not require Unique Identification per DFARS 252.211-7003(c)(1)(i). All packaging must be marked and labeled per MIL-STD-129 and delivered to the designated receiving facility in Tracy, CA, with transportation logistics governed by DLAD procedural notes C19 and C20. The solicitation was issued July 26, 2026, with responses due by August 3, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details