Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEARING, SLEEVE

Active
SPE4A6-26-T-06TYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four sleeve bearings, identified by NSN 3120-01-652-1953, under solicitation SPE4A6-26-T-06TY, with a response deadline of July 23, 2026, and a delivery requirement of 16 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the manufacturer’s origin. The supplier must adhere to tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers, and measuring and test equipment used must meet specified standards. Item Unique Identification is not required per the service customer’s request. Export control restrictions apply due to technical data subject to ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons or entities regardless of location. Access to such data is limited to DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and formal DLA authorization. The point of contact is Brea White, and the place of performance is New Cumberland, PA, 17070-5002.

General Info

Procure four sleeve bearings, NSN 3120-01-652-1953, delivery in 16 days, ITAR/EAR controlled, DLA quality standards, New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336320 - Motor Vehicle Electrical and Electronic Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06TY for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BREA WHITE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,SLEEVE
BEARING,SLEEVE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3120-01-652-1953 Quantity: 4 EA Purchase Request: 7015474350QTY: 4 Delivery: 16 days ADO

Similar Contracts

NAICS: 336320
New
DIBBS
HEADLIGHTHoffman Engineering, LLC is contracted to supply two units of a headlight part, identified by NSN 6220-01-735-8585 and part number 725-1020-004, under solicitation SPE8E7-26-T-3361. The requirement is for delivery within 20 days of the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit of issue is each, with a fixed quantity of two units at a price of $2.00 per unit, and no variance is permitted in delivery quantity. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which override any commercial standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements, Federal Standard 313, and MIL-STD-129 for marking and labeling. Hazardous materials, if applicable, must follow TQ requirement IP025; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded by DLA requirements. Palletization must adhere to RP001 guidelines. The headlight must be shipped using traceable means, explicitly excluding parcel post, to the specified delivery location at Fort Hood, Texas. All packaging and labeling must reference the correct unit of issue and quantity per unit pack as defined in the contract. The required delivery date is July 14, 2026, with the contract data indicating a solicitation posted on July 16, 2026, and a response deadline of July 27, 2026, suggesting the timeline is for future performance under active procurement channels. The point of contact for the contract is Kelly Mitchell at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336320
New
DIBBS
Supply of Air-Breathing Hose (NSN 4720002790094)The contract entails the manufacture and supply of an air-breathing hose identified by NSN 4720002790094, in full compliance with government specifications, including proper packaging and timely delivery. The work falls under the NAICS code 336320, which pertains to aerospace product and parts manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The contract is classified as a subcontract and was posted on July 15, 2026, indicating it is part of a larger procurement effort. There is no specified set-aside status, and no details are provided regarding the place of performance or point of contact. The contract can be referenced via the provided DIBBS link for official documentation and award details.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336320
New
DIBBS
Manufacture and Supply of Military-Grade Light Lens (NSN: 6220-00-432-4244)The contract requires the production, packaging, labeling, and delivery of exactly 529 units of a military-grade light lens designated as MS25216B-1, which must fully comply with the MIL-DTL-7989C specification and all applicable defense standards. The item is identified by NSN 6220-00-432-4244 and is intended for use in defense applications where precision and reliability are critical. All work must be performed in accordance with strict military quality assurance protocols, and the final product must be properly labeled and packaged to ensure traceability and readiness for deployment. This is a total small business set-aside under the SBA program, reserved exclusively for small businesses classified under NAICS code 336320, which covers aircraft parts and accessories manufacturing. The solicitation was posted on July 15, 2026, with a firm deadline for responses on July 23, 2026. The place of performance is specified as Robins Air Force Base, Georgia, with a zip code of 31098-1887, indicating where the delivered items will be received and utilized. The contract is issued under the ASC Commodities Division of the Department of Defense through a subcontracting mechanism, and all submissions must be made via the DIBBS platform.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
LENS, LIGHTThe contract pertains to the procurement of a LENS, LIGHT item identified by NSN 6220-00-432-4244 and part number MS25216B-1, with a total quantity of 529 units to be delivered FOB origin within 199 days, with no variance permitted in quantity. The item is classified as a commercial item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Inspection and acceptance occur at origin, and physical marking of bare items must comply with MIL-STD-129 and RQ017 requirements. Packaging must adhere to RP001 and DLA packaging standards, with hazardous material handled per FED-STD-313 and IP025, and non-hazardous items packaged per ASTM D3951 unless overridden by DLA requirements. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. A First Article Test (FAT) is mandatory, requiring testing of 10 units under the observation of a DCMA Quality Assurance Representative, in accordance with MIL-DTL-7989C Sup 1 and MIL-HDBK-831, with separate line item pricing for FAT even though no additional cost is assumed if unquoted. The solicitation is a total small business set-aside under NAICS code 336320 with a response deadline of July 23, 2026, and delivery must be completed by September 18, 2026, with shipping directed to Robins AFB, Georgia.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PARTS KIT, STARTER DThe contract is for the procurement of a Parts Kit, Starter D, with NSN 2920-01-510-2779, under solicitation SPE7L1-26-T-836X, issued by the Department of Defense’s Land Supply Chain. A quantity of four units is required at a total estimated value, with delivery mandated within 20 days after order placement to FOB Destination at FPO AP 96349-1100, Japan. The item must comply with rigorous technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, and packaging and preservation must strictly adhere to MIL-STD-2073-1 Appendix D for kits, with all markings conforming to MIL-STD-129 and palletization following DLA Packaging Requirements. Hazardous materials, if any, must be labeled per the Hazard Communication Standard and accompanied by updated Safety Data Sheets as required by 29 CFR 1910.1200, with full compliance to federal, state, and local safety regulations. The contract incorporates multiple FAR and DFARS clauses including those on small business representation, employment equity, trafficking in persons, cybersecurity safeguarding, changes, inspection at destination, and default, all subject to Deviation 2026-00038 except where otherwise noted. The contractor must be registered in SAM, use WAWF for electronic invoicing and receiving reports, and comply with Buy American and Berry Amendment restrictions, particularly since the Berry Amendment threshold is lowered to $150,000. Non-domestic materials require explicit disclosure, and all deliveries are subject to DPAS DX or DO priority ratings. Offerors must certify their small business status and other socioeconomic designations in SAM, and any joint ventures must provide full participant identifiers and representations. Payment is contingent upon compliance with all documentation, inspection, and labeling requirements, with acceptance occurring at the destination point upon delivery.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details