Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BEARING, WASHER, THRUST

Active
SPE4A6-26-T-36NNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-26-T-36NN is a request for quotes from the Defense Logistics Agency Aviation ASC Commodities Division for the procurement of 209 thrust washer bearings, identified as NSN 3120002876938 and part number 571394-6. This item is designated as a critical application item and is classified as a commercial product. The required delivery date is April 10, 2027, with a need ship date of March 8, 2027, and a delivery timeframe of 156 days after the order is placed. Shipping is FOB Origin, with the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and compliance standards, including a requirement for the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard. Quality assurance involves destination inspection and acceptance, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additionally, the contractor must comply with CMMC Level 2 self-assessment requirements, safeguarding of covered defense information, and the Buy American Act. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and payment processing is handled through the Wide Area WorkFlow (WAWF) system.

General Info

DLA seeks 209 thrust washer bearings by April 10, 2027, via DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-36NN - Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Chanee Yarborough
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEARING,WASHER,THRUST
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
SPE4A6-26-T-36NN
SECTION B
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BEARING, WASHER, THRUST
IDENTIFY TO:
SAMPLING:
CRITICAL APPLICATION ITEM
BE AEROSPACE CONSUMABLES 1RDZ1 P/N 571394-6
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018247312 0001 EA 209.000
NSN/MATERIAL:3120002876938
DELIVERY (IN DAYS):0156
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE4A6-26-T-36NN
SECTION B
PR: 7018247312 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/08/2027 Original Required Delivery Date:04/10/2027
SPE4A6-26-T-36NN NSN/Part Number: 3120-00-287-6938 Quantity: 209 EA Purchase Request: 7018247312QTY: 209 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-36NC
Solicitation SPE4A6-26-T-36NC is issued by the DLA Aviation ASC Commodities Division for the procurement of seven sleeve bearings, identified by NSN 3120-00-332-5570 and Woodward part number 210031. This requirement is part of a Foreign Military Sales project for Brazil, with a required delivery date of September 24, 2026, and a delivery window of 20 days after receipt of order. The items are to be shipped FOB Origin, with the freight forwarder located at the Brazilian Aeronautical Commission Warehouse in Temple Hills, Maryland, and the final shipping destination at Parque de Material Aeronautico de Lagoa Santa in Brazil. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the destination. Offerors must comply with the Buy American Act and Berry Amendment, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Quotations must be submitted via the DIBBS system by October 2, 2026.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-36LW
This contract is a solicitation for the procurement of 29 annular ball bearings, identified by NSN 3110-01-421-8583 and associated with Timken part numbers. The delivery timeframe is set for 165 days after order, with shipping terms as FOB Origin and inspection and acceptance occurring at the destination. The items are designated as critical application items and must adhere to specific technical and quality requirements, including the prohibition of intentionally added mercury and compliance with MIL-DTL-197M for preservation and packaging. A significant requirement of this acquisition is the domestic sourcing restriction, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada. Furthermore, the cost of the bearing components produced in these regions must exceed 50 percent of the total component cost. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Packaging and marking must strictly follow MIL-STD-129 and DLA packaging requirements.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-36PZ
This contract is a solicitation for the procurement of one sleeve bearing, identified by NSN 3120-12-148-9232. The requirement is issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-36PZ. The delivery is set for 20 days after receipt of order, with a required delivery date of June 29, 2026, and is designated as FOB Destination. The contract specifies strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It lists several approved manufacturers and part numbers, including options from Schaeffler, Deutz AG, and Liebherr-Hydraulikbagger. The final destination for the shipment is the USS Marinette (LCS 25), and the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BALL, BEARING
Solicitation # SPE4A6-26-T-36PM
Solicitation SPE4A6-26-T-36PM, issued by the DLA Aviation ASC Commodities Division, is for the procurement of eight ball bearings under NSN 3110-20-015-4443. The requirement is subject to strict domestic sourcing restrictions per DFARS 252.225-7016, requiring that the bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50% of the component cost originating from these regions. Offerors must provide a signed Contractor’s Declaration regarding the domestic or foreign nature of the materials to be eligible for award. The delivery is specified as 337 days after receipt of order, with a need ship date of September 5, 2027, and the place of performance located in New Cumberland, Pennsylvania. The contract mandates strict adherence to MIL-DTL-197M for preservation, packaging, and marking, and requires palletization according to RP001. Inspection and acceptance will occur at the destination per FAR 52.246-2. All quotes must be submitted via the DIBBS system by October 2, 2026, and must be based on FOB Origin. Notably, the government will not evaluate offers involving additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SELF-ALI
Solicitation # SPE4A6-26-T-36LR
Solicitation SPE4A6-26-T-36LR, issued by the DLA Aviation ASC Commodities Division, seeks quotes for three self-aligning plain bearings under NSN 3120-00-018-3956. This is designated as a critical application item and is identified as a commercial off-the-shelf product. Approved sources include RBC Specline Inc (P/N BDS32B-101) and Sargent Aerospace & Defense, LLC (P/N KSSB32-2). The requirement is governed by Technical Data Package Rev B Gen 2 and Quality Assurance Provision 13873 QAP-B02 Revision B. Delivery is required within 165 days, with shipping terms set as FOB Origin to DLA Distribution Warner Robins. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-197M for preservation. Inspection and acceptance will occur at the destination per FAR 52.246-2. Manufacturers must adhere to SAE AS9003 or ISO 9001 standards, and sampling will follow MIL-STD-1916 or ASQ H1331, with a requirement of zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program under DFARS 252.225-7001. Quotations must be submitted via the DIBBS system by October 2, 2026.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-36JU
This contract solicitation is for the procurement of two annular ball bearings, part number AA59647-02EATB, under solicitation number SPE4A6-26-T-36JU. The requirement specifies that the items must be delivered FOB Origin within five days. Compliance with technical and quality requirements is mandatory, including adherence to DLA packaging standards, MIL-STD-129 marking, and MIL-DTL-197M preservation and packaging specifications. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. A critical requirement of this acquisition is the domestic sourcing restriction for ball and roller bearings. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials offered to be considered for the award. Inspection and acceptance will take place at the origin.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-36LU
This contract is for the procurement of 357 sleeve bushings, identified by NSN 3120006189892 and part number 63-9280. The items are designated as critical application commercial items and must be produced in accordance with TDP Rev B Gen 2 and reference QAP 13873. The order is managed under purchase request 7018413348 with a delivery timeline of 165 days, and the required delivery date is June 8, 2027. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. Item Unique Identification is not required for this order, but physical identification and bare item marking must be performed as specified.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-36LJ
This contract is a solicitation for one annular ball bearing, identified as a critical application commercial item with NSN 3110-01-514-2318. The procurement is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-36LJ. Delivery is required within 20 days after receipt of order, with the FOB point set at origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-197M for preservation and packing. Key technical requirements include the prohibition of intentionally added mercury, the use of measuring and test equipment, and compliance with covered defense information regulations. The contractor must follow specific preservation methods based on bearing type and size and ensure all packaging facility quality assurance meets the standards outlined in MIL-DTL-197M.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BALL, BEARING
Solicitation # SPE4A6-26-T-36LK
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAR
Solicitation # SPE4A6-26-T-36MD
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, PLAIN, SELF-ALI
Solicitation # SPE4A6-26-T-36PR
Solicitation SPE4A6-26-T-36PR, issued by the DLA Aviation ASC Commodities Division, is for the procurement of one self-aligning plain bearing, identified as a critical application item with NSN 3120016853006 and Kamatics Corporation part number KRP208376VTZ. The requirement specifies a need ship date of April 13, 2027, with delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement mandates strict adherence to quality and technical standards, including ISO 9001:2015 compliance, TDP Rev A Gen 1, and FAA airworthiness approval. The contract includes rigorous documentation and marking requirements, specifically requiring supply chain traceability per DLAD Procurement Note C03 and compliance with FAA bare item marking. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the award is subject to the Buy American Act and Berry Amendment, and requires the use of the Wide Area WorkFlow system for electronic invoicing.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
ROLLER, LINEAR-ROTARY M
Solicitation # SPE4A6-26-T-36NM
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
Manufacturing and Supply of Ring Spacers (PN 011767511)This subcontract involves the manufacturing and supply of precision-machined ring spacers, specifically Product Number 011767511, for prime contractors supporting DLA supply contracts. The fabrication process requires the use of CNC lathes and mills to meet strict technical specifications. Deliveries are to be made to CONUS Stock Locations under the oversight of the Department of Defense ASC Commodities Division. The contract is a Total Small Business Set-Aside under NAICS code 336413. Compliance requirements are stringent, necessitating a certified Quality Management System, adherence to Higher-Level Contract Quality Requirements, and strict supply chain traceability per clause C03. Additionally, the provider must ensure full compliance with DFARS 252.225-7001. The response deadline for this opportunity is October 15, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332710
New
DIBBS
Manufacturer of Metal Tube Assembly (NSN 4710014421274)This subcontract involves the manufacture and supply of a Metal Tube Assembly under NSN 4710014421274 for prime contractors supporting the Department of Defense ASC Commodities Division. The selected provider must fabricate the tubing to exact specifications, implement rigorous manufacturer inspection systems, and ensure full supply chain traceability in accordance with DLAD Procurement Notes C03. All deliverables must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance requirements for this contract include ISO 9001:2015 certification, CMMC Level 2, and adherence to the Buy American Act. The work will be performed in San Diego, California, under NAICS code 332710. Interested parties must submit their responses by October 2, 2026, to provide the completed assemblies and all required supporting documentation.
Machine Shops

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Supplier of Metallic Grommets (NSN 5325015529592)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 241 metallic grommets under NSN 5325015529592. The supplier must provide units that match approved part numbers ABC7080–3A2A, HS4874–4AA, or SL3541AA44, ensuring all items meet Critical Application Item quality standards and technical specifications for delivery to the government location in New Cumberland. The procurement falls under NAICS code 332722 and was posted on September 24, 2026, with a response deadline of October 2, 2026. The contract is designed to support prime contractors delivering DLA supply contracts through the provision of certified hardware.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Supply of Collar, Pin-Rivet (NSN 5320011940734)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 100 units of threaded pin-rivet collars matching NSN 5320011940734. The provider is responsible for manufacturing or sourcing parts that meet strict technical specifications and quality control standards. Performance of the contract takes place in West Jordan, Utah, under NAICS code 332722. The agreement requires strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129. Additionally, the provider must comply with DFARS 252.223-7008 and DFARS 252.204-7012 regulations. The solicitation was posted on September 24, 2026, with a response deadline of October 2, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333242
New
DIBBS
Supply of Thrust Washer Bearings (NSN 3120002876938)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 209 specialized thrust washer bearings, specifically part number 571394-6, for use as Critical Application Items. The contractor is responsible for manufacturing or sourcing these components according to TDP Rev A Gen 1 and ensuring all units are packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The deliverables are to be shipped FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. This requirement falls under NAICS code 333242 and is associated with NSN 3120002876938.
Semiconductor Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
Supply of Hexagon Head Cap ScrewsThis subcontract with the Department of Defense ASC Commodities Division involves the supply of five hexagon head cap screws matching NSN 5305017030484. The provider is responsible for manufacturing or sourcing these industrial fasteners for prime contractors, ensuring all items are delivered to the performance location in Tracy, California. The contract requires strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging standards. Additionally, the supplier must comply with DFARS domestic sourcing requirements as mandated by the Berry Amendment. The solicitation was posted on September 24, 2026, with a response deadline of October 2, 2026, under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339943
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military packaging, marking, and palletization for prime contractors under DLA Aviation supply contracts. The service provider is responsible for applying markings according to MIL-STD-129, utilizing packaging data from MIL-STD-2073-1E, and executing palletization based on RP001 DLA Packaging Requirements. All work must utilize MIL-SPEC materials and industrial labeling equipment to ensure shipments are ready for government acceptance. The contract is managed by the Department of Defense under the ASC Commodities Division and will be performed in Mechanicsburg, Pennsylvania. With a NAICS code of 339943, the opportunity was posted on September 24, 2026, with a response deadline of October 2, 2026.
Marking Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
Manufacture and Supply of Sleeve BushingsThis subcontract involves the manufacture and supply of 2,000 precision-machined sleeve bushings for the Department of Defense via the ASC Commodities Division. The contractor is responsible for the fabrication of Critical Application Items using CNC and lathe equipment, ensuring all products adhere to the technical data package and DLA Master List requirements. Performance takes place in Mechanicsburg, Pennsylvania, under NAICS code 332710. To maintain high-precision aviation standards, the provider must supply all necessary documentation per RC001 for the Source Approval Request. The contract was posted on September 24, 2026, with a response deadline of October 2, 2026.
Machine Shops

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423430
New
DIBBS
Supply of Quick Release Pins (NSN 5315-01-649-9699)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 75 Quick Release Pins under NSN 5315-01-649-9699. The items are designated as Critical Application Items and must be delivered to New Cumberland, Pennsylvania. The contractor is responsible for ensuring all products meet strict packaging and marking specifications, including MIL-STD-129, RP001 palletization, and ASTM D3951 standards. Compliance with the Buy American Act and DFARS 252.204-7012 cybersecurity standards is mandatory for this engagement. The opportunity falls under NAICS code 423430, with a response deadline set for October 2, 2026.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
DLA Compliant Packaging and Preservation ServicesThis subcontract for DLA Compliant Packaging and Preservation Services, issued by the Department of Defense ASC Commodities Division, involves the specialized packaging, preservation, and marking of aircraft components for prime contractors. The service provider must ensure all items are packaged according to RP001 DLA Packaging Requirements for Procurement, utilizing mil-spec crates and moisture barriers, and prepared for Inspection and Acceptance at Origin in accordance with RQ009. The final deliverables are packaged and marked components ready for transit to DLA Depots. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488510. It was posted on September 24, 2026, with a response deadline of October 18, 2026.
Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

in 24 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Ring Spacers (NSN 5365-014238346)This subcontract involves the manufacturing of precision ring spacers under NSN 5365-014238346 for the Department of Defense ASC Commodities Division. The contractor is responsible for fabricating spacers that meet specific R or I number requirements from the DLA Master List, utilizing precision machining to ensure all aircraft part tolerances are achieved. All production must adhere to RQ001 Tailored Higher Level Contract Quality Requirements, and each delivery must be accompanied by a signed certificate of conformance. The contract is designated as a Total Small Business Set-Aside under NAICS code 336413. Deliveries are expected in quantities ranging from 20 to 60 units per delivery order. The solicitation was posted on September 24, 2026, with a response deadline of October 18, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 24 days
View Details
NAICS: 332722
New
DIBBS
Supply of Shear Bolts (P/N MS21297-10055)This subcontract involves the supply of six high-strength shear bolts, part number MS21297-10055 and NSN 5306016258745, for prime contractors under a Department of Defense DLA supply contract. The manufacturer must ensure all bolts are produced using aerospace-grade alloys and precision machining in strict accordance with NASM21297 Revision 3 and TDP Rev A Gen 1. The contract requires full compliance with MIL-STD-129 for marking and RP001 for palletization and labeling. Performance will take place in San Diego, California, under NAICS code 332722. The solicitation was posted by the ASC Commodities Division with a response deadline of October 2, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS