Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BELT, V

Active
SPE7L3-26-T-146ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one Belt, V with NSN 3030-01-539-5803 under solicitation SPE7L3-26-T-146Z, issued by the Department of Defense through Land Supplier Operations Vehicle Support. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods, wrapping, and marking requirements. The delivery address is the Distribution Management Office at Twenty-Nine Palms, California, with a designated shipping point and a unique military freight identifier for tracking. Shipment must use traceable freight methods; parcel post is prohibited. The required delivery date is August 5, 2026, and the solicitation closed on August 17, 2026, with technical and quality requirements governed by the DLA Master List referenced in the contract. All packaging and marking must align with DLA packaging directives, and the item’s unit of issue is each, with a total price of $1.00. The contract includes specific government-only fields for internal tracking and distribution codes.

General Info

One belt V, NSN 3030-01-539-5803, delivered FOB origin by August 5, 2026, per DLA packaging standards.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

M/F M35014 EXERCISE SUPPORT DIV, TWENTYNINE PALMS, CA, 92278-8151, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-146Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
LEE MILLER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BELT,V
BELT,V
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CUMMINS INC. 15434 P/N 3289113
CUMMINS INC. 15434 P/N 5690208
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017713230 0001 EA 1.000
NSN/MATERIAL:3030015395803
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BV OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7L3-26-T-146Z
SECTION B
PR: 7017713230 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
M67399
DISTRIBUTION MANAGEMENT OFFICE
1102 DEL VALLE RD BLDG 1102 DR 24
MF M67399 SHIPPING AND RECEIVING
TWENTYNINE PALMS CA 92278-8108
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
M35014
DISTRIBUTION MANAGEMENT OFFICE
1102 DEL VALLE RD BLDG 1102 DR 24
M/F M35014 EXERCISE SUPPORT DIV
TWENTYNINE PALMS CA 92278-8151
US
MARKFOR
M35014
DISTRIBUTION MANAGEMENT OFFICE
1102 DEL VALLE RD BLDG 1102 DR 24
M/F M35014 EXERCISE SUPPORT DIV
TWENTYNINE PALMS CA 92278-8151
US
M/F: (TCN) M3501462120008
RDD: N
PROJ: TP 1
SUPP ADD: YE7762 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A3A DIST: ADV: 2A FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE7L3-26-T-146Z NSN/Part Number: 3030-01-539-5803 Quantity: 1 EA Purchase Request: 7017713230QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3989
The contract is for the procurement of 3 sheets of solid rubber material, measuring 0.250 inches thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides. The item is identified by NSN 9320-00-042-3117 and is being acquired under solicitation SPE8E6-26-T-3989, with a response deadline of August 17, 2026. The delivery is scheduled 167 days after contract award. The specification prohibits the presence of asbestos as defined in FED-STD-313 and mandates compliance with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria requiring zero non-conformances unless otherwise stated in the contract. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The procurement is fully competitive under a federal or military specification, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting office is the DLA New Cumberland Facility under the Department of Defense, with Ryan Kirlin designated as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8ED-26-T-1237
The contract is for the procurement of three collapsible fabric tanks, each identified by NSN 5430015277233 and part number ATPD2295 Class I Type I, with an additional line item for a first article test requirement. Each tank is priced at $3.00, with a total quantity of three units, and delivery is required within 20 days FOB origin with no tolerance for quantity variance. The product must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements, and hazardous material handling follows TQ requirement IP025 per FED-STD-313. Inspection and acceptance occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposals, and the contractor must implement a quality system certified to ANSI/ISO/ASQ 9001-2015 excluding paragraph 7.3. All items must be marked per MIL-STD-130N and shipped by traceable means only, delivered to the designated military facility at Camp Lejeune, North Carolina. The first article test, listed as a separate line item with one unit, is mandatory and non-reimbursable unless specifically waived, and its completion is a precondition for production delivery. The contract incorporates detailed technical documentation referenced through drawing and quality assurance provision numbers, with all data available through the DLA’s eProcurement portal during the solicitation window.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3990
The contract is for the procurement of five rubber sheets, solid, with dimensions of 36 inches in length, 36 inches in width, and 0.125 inches in thickness, smooth on both sides. The item is identified by NSN 9320-00-061-0675 and is governed by DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The specification mandates compliance with procurement clause 52.211-9G03 regarding the marking of individual sheets, and covered defense information may apply. Government identification must be removed from non-accepted supplies. Delivery is required within 167 days after order, under purchase request 7017758597. The solicitation number is SPE8E6-26-T-3990, issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 326299, and the contracting office is the DLA New Cumberland Facility under the Department of Defense. The primary point of contact is Christopher Barraro, reachable via email and phone provided. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COVERALL, FLOTATION
Solicitation # SPE8E9-26-T-3365
The contract pertains to the procurement of 8 units of a flotation coverall, identified by NSN 4220-01-486-8281 and manufacturer part number MS2175GS-2-XXL from MUSTANG SURVIVAL MFG, INC, under solicitation SPE8E9-26-T-3365. Delivery is required within 167 days of contract award, with a final delivery deadline of February 1, 2027, and the items must be shipped FOB origin. The unit price is $8.00 per unit, totaling $64.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 guidelines. The item has a mandatory 120-month shelf life with no extension permitted. Mercury or mercury-containing compounds are strictly prohibited except in limited functional applications such as batteries, fluorescent lamps, or specified instruments, with any portable devices containing mercury required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and the unit of issue is each (EA). The contract references restricted defense information and mandates compliance with all relevant DoD procurement and environmental safety standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLUL
Solicitation # SPE8E6-26-T-3988
The contract pertains to the procurement of rubber sheet, cellular, with specific technical and quality requirements outlined under NSN 9320-00-069-5176. The material must be 1/16 inch thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides, and strictly prohibits the use of asbestos as defined in FED-STD-313. An exception to AMS 3195 Revision C allows the low temperature brittleness test to replace the compression deflection at low temperature test. The specification references the DLA Master List of Technical and Quality Requirements for additional technical and quality criteria identified by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are deemed major. Zero non-conformances are required in sampling unless otherwise stated. Government identification must be removed from non-accepted supplies. The item is procured as fully competitive under a federal specification. Forty-eight units are required under purchase request 7017758593, with delivery due within 63 days of award. The solicitation, issued under SPE8E6-26-T-3988, opened on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Cherry Point location, with Christopher Barraro as the primary point of contact.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
BLOCK, RUBBER
Solicitation # SPE8E6-26-T-4040
The contract pertains to the procurement of 1,259 units of rubber blocks with NSN 9320-01-565-6471, under solicitation SPE8E6-26-T-4040, issued by the Defense Logistics Agency District San Joaquin. The item must be delivered FOB origin within 167 days of contract award, with a required delivery date of November 21, 2026, and a need ship date of February 1, 2027. Packaging and marking must strictly comply with MIL-STD-129R, ASTM D3951, and the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging must adhere to RP001 DLA Packaging Requirements for Procurement, including palletization, unit of issue, and quantity per unit pack as specified. The government identification must be removed from non-accepted supplies per RQ011. The contract enforces a zero variance in quantity and inspection and acceptance occur at the destination. The delivery address is DLA District San Joaquin, Recipient Warehouse 57 in Tracy, California, and transportation logistics must follow DLAD Proc Notes C19 and C20. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 326299, with a response deadline of August 17, 2026. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, using the revision in effect on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Supplier of Approved Filter Components (Sub-tier Manufacturing)
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a commercial off-the-shelf nonmetallic hose assembly with a 0.310-inch inner diameter and a total length of 23.0 inches, strictly adhering to the designated National Stock Number and approved manufacturer part numbers. The item must meet all technical and compliance requirements specified for use within Department of Defense systems, ensuring interoperability and reliability under operational conditions. The solicitation is issued as a subcontract under NAICS code 326299 and is being managed by the Maritime Supply Chain ESOC Buys group within the Department of Defense. The contract was posted on August 4, 2026, with a firm response deadline of August 17, 2026, and the place of performance is designated as Tampa, Florida, with a zip code of 33614-6409. All proposals must align with the exact dimensional and material specifications outlined, and only assemblies sourced from approved manufacturers will be considered. The procurement is conducted through the DIBBS platform, and interested parties are required to review the full solicitation details via the provided link to ensure complete compliance with submission protocols and technical requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Precision O-Ring Manufacturing and Supply
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7LX-26-U-9264
The contract seeks the procurement of 4,574 units of a BOOT, DUST AND MOISTURE SEAL specifically designed for tail rotor blade applications, identified by NSN 5340-01-108-3681, under solicitation SPE7LX-26-U-9264. The delivery must be completed within 104 days after award, with FOB Origin terms applying, meaning the contractor assumes all responsibilities and risks until the point of shipment. This is an indefinite-delivery contract with a maximum estimated value of $350,000, issued as a Women-Owned Small Business Set-Aside under NAICS code 326299. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the item must adhere to specified drawing controls, with only approved sources currently recognized, though additional qualified sources may be considered for future acquisitions. The product must comply with stringent environmental directives, including a complete prohibition on Class I ozone-depleting chemicals, which supersedes any conflicting specification but does not reduce product performance obligations. Substitutes require prior approval, and all materials must be labeled according to OSHA’s Hazard Communication Standard unless exempted under specific federal statutes. The item is subject to rigorous packaging, marking, and preservation standards, requiring compliance with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), using box-type unit containers marked per MIL-STD-129 with data matrix barcodes, shelf-life expiration labels, and government property identification per MIL-STD-130N. Preservation must maintain a clean, dry condition (CLNG/DRY code 33) with a non-extendable shelf life of 180 months. Export control restrictions apply under ITAR or EAR, mandating that all technical data be handled only by contractors with JCP certification, who have completed DLA’s export-controlled data training and questionnaire, and are formally approved for access. Cybersecurity requirements are enforced via CMMC Level 2 certification, applicable to the contractor organization as a C3PAO, ensuring adequate safeguards for covered defense information. Inspection and acceptance occur at origin, governed by FAR 52.246-2, and all invoices must be submitted electronically through Wide Area WorkFlow. The contractor must also remove government markings from all rejected items and comply with U.S.-flag vessel mandates for ocean transport unless a formal
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-Q-1394
The contract is for the procurement of 15,000 units of a molded track cushioning pad assembly, identified by NSN 5340-01-587-6763, under solicitation SPE7L1-26-Q-1394. Delivery is required within 146 days of award, with the solicitation issued on August 4, 2026, and responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies prior to delivery. The item includes technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this controlled data. The acquisition falls under NAICS code 326299 and is managed by the Department of Defense’s Land Supply Chain, with Rodney McNinch listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
FLAME ARRESTER, VENT
Solicitation # SPE8ED-26-T-1217
The contract specifies the procurement of one flame arrester, vent with NSN 5430-01-724-2662 and part number 60-1006RK-01 from RKI INSTRUMENTS, INC., under solicitation SPE8ED-26-T-1217. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes considered major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements RP001, with hazardous material handled according to TQ requirement IP025 and non-hazardous material commercially packaged per ASTM D3951 when not overridden by DLA requirements. All packaging must be marked and labeled appropriately, and palletization must follow DLA standards. The material must be shipped by the fastest traceable means, with parcel post prohibited, and delivered to Sierra Army Depot in Herlong, CA. The required delivery date is July 24, 2026, and government-use identifiers and shipping instructions are strictly defined, including a designated point of contact and electronic procurement link.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148B
The contract specifies the procurement of one unit of a vehicular bracket identified by NSN 2510-01-706-9776 and part number 5270099-329 under solicitation SPE7L3-26-T-148B, with a required delivery within five days of order placement. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other specifications, including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The item must be shipped via traceable freight to the designated military facility in San Diego, California, with parcel post explicitly forbidden. The unit of issue is each, priced at one dollar, with no total price adjustment permitted. The contract enforces strict labeling and packaging standards, and all technical and quality specifications incorporated by reference must be met without exception, overriding any conflicting requirement unless explicitly amended. The point of contact for inquiries is Lee Miller at DLA, with responses due by August 17, 2026, and the required delivery date set for August 3, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333612
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L3-26-T-148A
The contract pertains to the procurement of a shaft, shoulders, identified by NSN 3040-00-549-3495 and part number 41001707, with a single unit quantity to be delivered under solicitation SPE7L3-26-T-148A. Delivery must occur within 20 days of award, with FOB origin terms, and no variance allowed in quantity. Inspection and acceptance occur at the origin, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and unit containerization as defined by code Q and packaging level B. Marking must adhere to MIL-STD-129 with no special marking required. The item is to be shipped to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, with freight forwarding details governed by DLA procedural notes. The material is explicitly prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals must receive prior approval unless already authorized by specification. The item has no shelf life requirement. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition type and date. The contract specifies a unit price of $1.00 for a total price of $1.00, with a required delivery date of August 7, 2026. The procurement is issued by the Department of Defense under the NAICS code 333612, with Lee Miller as the primary point of contact.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332119
New
DIBBS
DIAL, CONTROL
Solicitation # SPE7L3-26-T-148J
This contract, issued under solicitation SPE7L3-26-T-148J by the Department of Defense’s Land Supplier Operations Vehicle Support, requires the delivery of one unit of a DIAL, CONTROL with NSN 5355-01-686-6662, to be furnished in accordance with strict technical and packaging standards. The item must be delivered within ten days to Camp Lejeune, North Carolina, FOB origin, with no variance permitted in quantity, and subjected to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container codes, and palletization governed by DLA’s procurement packaging requirements. All materials must adhere to environmental prohibitions, including the complete exclusion of Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds, except for specified functional exceptions such as batteries, fluorescent lights, and certain instruments as approved by NAVSEA, which must also include secondary containment and shockproofing. The contract incorporates referenced technical and quality requirements from the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Special shipping instructions prohibit parcel post and mandate traceable freight delivery via a designated military freight address, with marking and documentation strictly aligned to government protocols. The contract includes detailed logistics data, including a unique government tracking identifier, project code, and official point of contact for procurement inquiries.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-147Z
The contract pertains to the procurement of one unit of a vehicular bracket designated by NSN 2510-01-707-0377 and part number 5270900-329 from POLARIS SALES INC, issued under solicitation SPE7L3-26-T-147Z. Delivery is required within five days of award, with goods to be shipped FOB origin and inspected and accepted at the destination. No quantity variance is permitted, and strict compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, superseding any conflicting specification standards. The item must not contain any Class I ozone-depleting chemicals, and substitutes require prior approval unless explicitly authorized. Packaging must conform to ASTM D3951, with markings and labels adhering to MIL-STD-129, and palletization in accordance with DLA’s packaging requirements. The unit of issue is each, and the sole quantity ordered is one. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the Marine Wing Support Squadron 373 in San Diego, with a freight shipping point at Bldg 7209, Miramar Way. The required delivery date is August 3, 2026, and the contract is subject to DLA’s governance, with points of contact and compliance details specified for federal use.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148K
The contract specifies the procurement of one unit of BRACKET, VEHICULAR C with NSN/Part Number 2510-01-706-9524 under solicitation SPE7L3-26-T-148K, with a delivery requirement of five days after award. The item is classified as a commercial item and must comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless explicitly authorized. Inspection and acceptance of the item may occur at the origin, and government identification must be removed from any non-accepted supplies. The point of contact is Lee Miller, with the place of performance located in San Diego, California, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
PACKING, PREFORMED
Solicitation # SPE7L3-26-T-148F
This contract pertains to the procurement of packed preformed gaskets under solicitation SPE7L3-26-T-148F, with a requirement for four units to be delivered within 88 days to New Cumberland, Pennsylvania. The item is identified by NSN 5330-00-587-9955 and falls under Federal Supply Class 5330/5331. All supplies must comply with stringent packaging standards, requiring medium-duty, waterproof, greaseproof, and opaque packaging per MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation. The contract explicitly prohibits the use of ozone-depleting chemicals in any form and forbids the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents approved by NAVSEA. When mercury is permitted, a secondary containment must be provided per NAVSEA 5100-003D, and all portable fluorescent lamps or instruments must be shockproof. Supply chain traceability documentation must be retained by the contractor as per DLA Directive Procurement Note C03 from August 2016, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. Covered defense information obligations apply, and all documentation requirements for source approval and delivery are binding. The primary point of contact is Allysson Krumm, with a response deadline of August 17, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L3-26-T-147X
The contract pertains to a gasket with NSN 5330-01-230-7033, requiring a quantity of 119 units to be delivered within 21 days of award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure, even to foreign nationals within the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled technical data, and approved access through the DLA questionnaire may receive the controlled information. The solicitation number is SPE7L3-26-T-147X, posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 339991. The contracting activity is managed by the Department of Defense under Land Supplier Ops Vehicle Support, with performance located in New Cumberland, Pennsylvania, and primary point of contact being Susan Diamond at dla.flbb1prs@dla.mil or 614-692-5625.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE7L3-26-T-148E
This contract specifies the procurement of a nonmetallic seal, part number 149T7259Y9, with NSN 5330016879369, for delivery to Joint Base Elmendorf-Richardson in Alaska. Two units are required under solicitation SPE7L3-26-T-148E, with a delivery window of 20 days FOB origin and no variance allowed in quantity. The seal is designated as a critical application item for the Federal Aviation Administration, requiring airworthiness approval and strict compliance with FAA bare item marking requirements. All packaging, preservation, and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 Type II Class C Style 1, which mandates medium-duty, waterproof, greaseproof, opaque packaging to protect against UV degradation. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and all government identification must be removed from non-accepted supplies. The item is subject to configuration change management through engineering change proposals and variance requests, and any covered defense information must be handled appropriately per RD003 requirements. Transportation and shipping instructions follow DLA Procurement Notes C19 and C20, with delivery directed to the specified warehouse at Joint Base Elmendorf-Richardson. The required delivery date is July 30, 2026, and the contract is administered by the Department of Defense’s Land Supplier Operations Vehicle Support office.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L3-26-T-148C
This contract mandates the delivery of one vehicle hatch door identified by NSN 2510-01-725-9385 and part number 403/R7475 from JCB INC under solicitation SPE7L3-26-T-148C, with a required delivery date of July 31, 2026, and a 20-day delivery window from order placement. The item must be supplied as a single unit with zero tolerance for quantity variance and delivered FOB origin. All technical and quality specifications are governed exclusively by the DLA Master List of Technical and Quality Requirements, and any references to ASTM D3951 for packaging are subordinate to these mandatory standards. Packaging must comply with MIL-STD-129 for marking and labeling, adhere to RP001 DLA Packaging Requirements, and be palletized according to specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated government delivery point at BLDG 90312, MACHOL STREET, FORT HUACHUCA AZ 85613-6000, with the same address used for marking and freight shipping. The contract assigns the unit of issue as each (EA) and stipulates the packaging quantity per unit pack is 1. Government use codes, freight control, and delivery tracking identifiers are embedded within the contract, including a traceable control number M2131062090163 and project code TP 3. All performance and compliance obligations are subject to inspection and acceptance at the destination, and the point of contact for inquiries is Lee Miller with the Department of Defense. The contract remains under the jurisdiction of DLA procurement policies and supersedes any civilian or general industry standards unless explicitly aligned with DLA directives.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148G
The contract pertains to the procurement of one unit of a vehicular bracket identified by NSN 2510-01-707-0135 and part number 5270098-329, issued under solicitation SPE7L3-26-T-148G by the Department of Defense through the Land Supplier Operations Vehicle Support agency. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take priority. Packaging must be marked and labeled per MIL-STD-129, palletized according to DLA packaging standards, and shipped via the fastest traceable means—parcel post is explicitly prohibited. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless already authorized by specification. The delivery destination is the Marine Wing Support Squadron 373 in San Diego, with a freight shipping address at Building 7209, Miramar Way, Door 13. The required delivery date is August 3, 2026, and the contract mandates compliance with all DLA procurement directives, including unit of issue and quantity per unit pack specifications. The point of contact for inquiries is Lee Miller, reachable via phone or email provided in the contract data.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L3-26-T-148H
The contract specifies the procurement of one mounting plate identified by NSN 2510-01-725-6969 and commercial part number 335/A4213 from JCB INC, with a required delivery within 20 days of contract award. The item is classified as a commercial item and must be delivered FOB origin with no variance allowed in quantity. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization adhering to DLA’s packaging requirements. The use of class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification but not reducing other product requirements, and any substitute chemicals require prior approval. Inspection and acceptance occur at the destination, and shipment must be made via traceable means, excluding parcel post. The delivery address is Fort Huachuca, Arizona, with specific marking and routing codes provided for government use. The unit of issue is each, priced at $1.00, with total contract value of $1.00. All technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over other standards. The required delivery date is July 31, 2026, with the solicitation issued under SPE7L3-26-T-148H and response due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L3-26-T-148D
The contract specifies the procurement of a WIPER RING with part number 842-349641-2 and NSN 5330017297530, requiring six units to be delivered within 140 days under solicitation SPE7L3-26-T-148D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date. The item is classified as a Critical Application Item under Boeing and must comply with FAA Bare Item Marking Requirements and the FAA Airworthiness Approval CDRL-FAACERTCOM-25015. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking applied. The item must be packaged in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, due to vulnerability to UV exposure, applicable to direct vendor delivery, foreign military sales, and stock shipments. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. Transportation logistics are governed by DLAD Procurement Notes C19 and C20, and the offeror must comply with all contractual clauses regarding configuration change management, removal of government identification from non-accepted supplies, and packaging of hazardous materials. The contract requires full adherence to DLA packaging standards and uses the approved unit of issue, with pricing at $6.00 per unit totaling $36.00.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details