This Government Contract opportunity from Environmental Protection Agency was posted on September 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Benchtop Analytical Balance Supplier

Closed

Federal

Submission Closed09/14/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

SLED

NDSU - Dynamic Mechanical Analyzer

Solicitation # SRC000482

North Dakota State University is soliciting bids under solicitation SRC000482 for the procurement of a complete Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support bending, tension, and compression modes, feature a normal force sensor range of 0.001 N to 50 N, and operate within a temperature range of -170 °C to +600 °C. The base bid must include all necessary hardware, sensors, fixtures, first-year software licenses, delivery, installation, commissioning, training, and a one-year warranty. Optional additions may include rotational or torsional capabilities and multi-year software support. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses electronically via the NDBuys portal by November 4, 2026, at 2:00 PM CT, including a completed Cost Proposal Form and a Technical Compliance Form. Delivery and installation are required at the R1A Laboratories in Fargo, North Dakota, with a target window of Fall 2026 or January 2027. Final acceptance is contingent upon a successful functional demonstration and the completion of required training. The selected contractor must adhere to NDSU's independent contractor terms, including maintaining minimum liability insurance of $500k/$2M and complying with North Dakota Open Records Law.

POSTED

DEADLINE

Supply of Borescope Extension Tubes

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

TUBING, LYSE, ANALYZER, H

Solicitation # SPE2DH-27-T-0288

Solicitation SPE2DH-27-T-0288 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one unit of hematology analyzer lyse tubing, identified by NSN 6630-01-525-5546 and manufacturer part number 6805686 from Beckman Coulter Inc. The requirement is for a device regulated by the FDA, with a required delivery date of October 27, 2026, and a delivery window of 84 days after receipt of order. Delivery is specified as FOB Destination to the USA Medical Materiel Center in Korea. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129 for medical marking, and requires packaging in accordance with MIL-STD-2073-1E and special instructions MPPWN00001. Inspection and acceptance will occur at the destination. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and hazardous material labeling per 29 CFR 1910.1200. Invoicing must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 3, 2026, via the DIBBS portal.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

System Sourcemeter-Dual Channel (200V) Supplier

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Supply of High Finesse WS8-2 Wavemeter SystemThis subcontract, managed by the Department of Defense agency FA8601 Aflcmc Pzio, involves the supply of one High Finesse WS8-2 wavemeter system to support prime contractors on Air Force Institute of Technology projects. The delivery includes a fully configured system comprising hardware, firmware, and software, specifically featuring a MCLC8 multi-channel switch, an absolute Rb reference source, and a PID controller designed for laser frequency stabilization. The project will be performed at Wright Patterson AFB and falls under NAICS code 334516. To ensure security and regulatory adherence, the provider must maintain compliance with CMMC Level 1 and DFARS 225.872. The solicitation was posted on October 27, 2026, with a response deadline of November 12, 2026.

POSTED

DEADLINE

Microbiology Analyzers and Incubators SupplyThis subcontract opportunity with the Department of Veterans Affairs Network Contract Office 8 involves the supply of automated instrumentation for microbial incubation and ID/AST testing. The scope of work requires the delivery and installation of operational equipment, including large and medium capacity redundant analyzers, MALDI-TOF Mass Spectrometry systems, and blood culture incubators with a capacity exceeding 400 bottles. All provided equipment must strictly adhere to FDA guidelines and VA Directive 6550 Appendix A. The project is based in Tampa, Florida, under NAICS code 334516. Interested parties must submit their responses by November 10, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Baxter/Hill-Rom Helux Pro Surgical Light System

Solicitation # 75N98027Q00038PCA-NIA-11810

The National Institutes of Health, through the National Institute on Aging, is seeking a firm fixed-price contract for the procurement, delivery, and turnkey installation of a Baxter/Hill-Rom Helux Pro Surgical Light system. This acquisition is intended for the NIA Clinical Research Unit in Baltimore, Maryland, to support invasive outpatient biopsy procedures and maintain clinical continuity. The scope of work includes the de-installation of obsolete hardware and the installation of a medical-grade LED lighthead with a ceiling-mounted single-arm suspension. Technical requirements specify a Color Rendering Index of 95 or higher, deep-red rendering of 90 or higher, and support for DICOM imaging standards via a 55-inch wall-mounted 4K/UHD monitor. This is a combined synopsis and solicitation conducted under FAR Part 12.6 for commercial items, and it is not expected to exceed the simplified acquisition threshold. The contract is open to full and open competition and is not set aside for small businesses, falling under NAICS code 334516. Award will be based on the best value, considering price and other factors such as warranty, lifecycle cost, and maintenance availability. A minimum one-year OEM warranty is required, supplemented by multi-year agreements for the lighthead and integrated system. Interested offerors must be registered in the System for Award Management and submit their proposals by December 8, 2026, at 2:00 PM EST.

National Institutes Of Health Olao

POSTED

DEADLINE

Turbo Pump and Controller Services

Solicitation # N0017327Q1301424027

Naval Research Laboratory

POSTED

DEADLINE

Carl Zeiss Microscopy, LLC, SmartZoom 5, and options

Solicitation # RFQSSPR511693

Oak Ridge National Laboratory, under the Department of Energy, is soliciting firm fixed price quotations for the procurement of a Carl Zeiss Microscopy SmartZoom 5 system and associated options for the Enrichment Science and Engineering Division. The required equipment includes a SmartZoom 5 optical engine with integrated 10x zoom, a motor tiltable stand, a scanning stage, specific PlanApo objectives, a rotatable polarizer, a diffuser, a control unit with wireless peripherals, and an all-in-one control PC running Windows 11 2024 LTSC. While the requirement specifies Carl Zeiss, brand name or equal provisions apply. Award will be granted to the lowest priced, technically acceptable proposal from an authorized reseller. The seller is responsible for all packing and shipping to ensure the system arrives at the Oak Ridge, Tennessee site in undamaged, working condition, with domestic shipments handled as FOB Destination and international shipments preferred as Delivered at Place. Key deliverables include a calibration certification traceable to SI or ILAC MRA standards and documentation verifying that products match catalog specifications. The contract incorporates various FAR and DOE regulations, including strict cybersecurity standards based on NIST SP800-161 and DOE O 205.1D, as well as prohibitions on certain telecommunications equipment. Offerors must provide a lead-time, country of origin, and completed abbreviated representations and certifications by the November 6, 2026, deadline.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

High-Precision Wavemeter

Solicitation # FA860127Q0020

The United States Air Force, through the Air Force Life Cycle Management Center at Wright-Patterson Air Force Base, Ohio, is conducting market research via a Sources Sought notice to identify capable providers for a High-Precision Wavemeter. The requirement is for the Air Force Institute of Technology to procure one High Finesse WS8-2 wavemeter equipped with a multi-channel switch and an absolute Rb reference source. The scope includes the delivery of all necessary hardware, firmware, software, installation, and operational training to support physics research. Technical specifications require a wavelength range of 390-1180 nm, a measurement resolution of 200 kHz, a measurement speed of 1 kHz, and the ability to measure up to eight channels simultaneously. Absolute accuracy must be ±10 MHz for the full range and ±2 MHz within ±2 nm of the reference source, with a calibration source wavelength of 780.24 nm. Interested parties must submit a capability package by November 12, 2026, including company identification, CAGE code, UEI, and socio-economic status under NAICS code 334516. Submissions must demonstrate past experience with similar projects, commercial sales history, and facility capabilities. A mandatory requirement for all offerors is CMMC Level 1 compliance, which must be self-certified in the Supplier Performance Risk System. While a set-aside decision has not yet been made, the government is considering a small business set-aside and requires detailed information on teaming arrangements and compliance with limitations on subcontracting. This notice is for market research purposes only and does not constitute a binding contract offer.

POSTED

DEADLINE

6632--FY27 Microbial Incubation ID and Susceptibility CPT

Solicitation # 36C24827Q0029

The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

6640--Notice of Intent to Sole Source - Roche Tests - NIHCS

Solicitation # 36C25027Q0074

The Department of Veterans Affairs, VISN 10, Northern Indiana Health Care System, intends to award a firm fixed price contract for reagents to Roche Diagnostics Corp. under the authority of FAR Part 6.302-1, which identifies only one responsible source. This procurement, categorized under NAICS code 334516, is being conducted via Simplified Acquisition Procedures. The reagents are specifically required for use with existing Roche Cobas Pros instruments at the Northern Indiana VAHCS facility in Marion, Indiana. The scope of the requirement includes a comprehensive list of diagnostic tests and reagents, featuring high-volume items such as Creatinine, Potassium, Sodium, and Urea Nitrogen/BUN, as well as various toxicology and hormone tests. As this is a Notice of Intent to Sole Source, it is not a formal solicitation for proposals. Any party wishing to challenge this intent must provide clear and convincing evidence that competition would be advantageous to the government by 12:00 pm on October 30, 2026. The primary point of contact for this action is Contract Specialist Rachel MacRae.

250-NETWORK Contract Office 10 (36C250)

POSTED

1 day ago

DEADLINE

in 2 days

AI Contract Overview

This subcontract opportunity is issued by the Environmental Protection Agency's Region 5 Laboratory Services and Applied Sciences Division for the procurement and installation of one high-precision benchtop analytical balance. The equipment is intended for prime contractors to support the preparation of analytical standards, reagents, and samples specifically for the analysis of per- and polyfluoroalkyl substances (PFAS), alkylphenols, and low-level pesticides. The solicitation is categorized under NAICS code 334516 and was posted on September 10, 2026. Interested parties must submit their responses by the deadline of September 14, 2026. Further details and application processes are managed through the FedConnect portal.

General Info

EPA Region 5 seeks a high-precision benchtop analytical balance for chemical analysis.

Agency

Environmental Protection Agency → Region 5

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 68HE0526Q0019.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MADE IN AMERICA REQUEST FOR INFORMATION

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 10

subcontract

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyEnvironmental Protection Agency → Region 5

ContactsNo contacts available

OfficeN/A

Organization / AgencyEnvironmental Protection Agency → Region 5

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies a high-precision benchtop analytical balance for prime contractors on Region 5 Laboratory Services and Applied Sciences Division projects. Provides laboratory-grade equipment suitable for the preparation of analytical standards, reagents, and samples for the analysis of low-level pesticides, alkylphenols, and per- and polyfluoroalkyl substances (PFAS). Delivers one installed benchtop analytical balance.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS