Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Bilateral Army Exercise at Camp Higashi Chitose, Hokkaido, Japan

Active
FA520926Q044AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Garrison Japan seeks a firm-fixed price contractor to repair exterior lighting at the helipad areas of Akasaka Press Center and Camp Zama in support of the bilateral military exercises ORIENT SHIELD 26 and YAMA SAKURA 91. This requirement is being sourced directly under FAR 12.201-1(c)(2) without a competitive solicitation, with an anticipated award date around August 11, 2026. The contractor must provide all personnel, equipment, materials, transportation, and management necessary to complete the work in full compliance with commercial standards, local Japanese regulations, and applicable Japanese laws, ensuring service levels match those of the civilian market. All work must be performed entirely within Japan, and offerors are required to hold valid Japanese business licenses and possess a Japanese CAGE code to be eligible. The solicitation number is FA520926Q044A, with responses due by August 10, 2026, and the point of contact for inquiries is Anju Bilyk, with Keiko Osawa as the secondary contact.

General Info

Repair exterior lighting at Akasaka Press Center and Camp Zama for military exercises under FAR 12.201-1(c)(2), award August 2026.

Agency

Department Of Defense → FA5209 374 Cons PkView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

AP

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA5209 374 Cons Pk
Contacts2 people available
OfficeAPO, AP, 96326-9053, USA
Organization / Agency
Department Of Defense → FA5209 374 Cons Pk
View Agency Profile
Office AddressAPO, AP, 96326-9053, USA
Contacts

Full Description

Show more

THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS NOR QUATATIONS.


The Government intends to solicit this requirement directly from suppliers IAW RFO FAR 12.201-1(c)(2) for firm-fixed price contract to Repair lights outside of the helipad at Akasaka Press Center and at Camp Zama for DPW, USAGJ. Anticipated award date is around 11 Aug 2026 (subject to change).


Description:


The contractor shall provide all necessary personnel, supervision, management, tools, equipment, transportation, materials and any other items or services necessary to support the U.S. Army/Japan Ground Self-Defense Forces (JGSDF) Bilateral Exercise ORIENT SHEILD 26 (OS26) and YAMA SAKURA 91 (YS91) in accordance with commercial standards, local standards, Japanese ordinances and Japanese laws. These services should be performed at the same levels as in the commercial marketplace to the maximum extent possible.


 Notes:


Note 1: This project will be performed in its entirety in the country of Japan. The successful offeror must have valid licenses to meet the requirement in the country of Japan. Offerors must have a Japanese CAGE code.

Similar Contracts

Same NAICS industry code

NAICS: 238210
New
SLED
Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.
Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.
Aviation Project Management Group

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 238210
New
SLED
Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.
Port Construction Services

POSTED

about 8 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → FA5209 374 Cons Pk

Same awarding agency

NAICS: 561920
New
Federal
Bilateral Army Exercise at Camp Higashi Chitose, Hokkaido, Japan
Solicitation # FA520926F0210
The U.S. Government intends to award Blanket Purchase Agreement (BPA) Call Orders under solicitation FA520926F0210 to support the Bilateral Army Exercise at Camp Higashi Chitose in Hokkaido, Japan, exclusively to companies already holding one of the four Japan-wide Exercise Support Services BPAs: FA520926A0018, FA520926A0019, FA520926A0020, or FA520926A0021. This notice is not a solicitation for competitive proposals or quotations, and no submissions are invited or accepted from firms outside these pre-existing BPAs. All call orders will be issued in accordance with FAR 12.201-1, and no feedback, evaluations, or responses will be provided to any entity that attempts to respond to this notice. The requirement is managed by the Department of Defense through office FA5209 374 Cons Pk, located at APO AP 96326-9053, with primary and secondary points of contact available for inquiries. The response deadline for call order issuance under this notice is August 6, 2026, at 2:00 a.m., and the activity is scheduled to occur at Camp Higashi Chitose in Chitose-shi, Japan. There is no set-aside designation applied to this procurement, meaning it is open solely to the designated BPA holders without restriction based on business size or other socioeconomic categories. The official point of contact for questions is Hiroko Takahashi, with Keiko Osawa as the secondary contact, both reachable via U.S. Air Force email addresses. The notice is posted under the special notice category on the SAM.gov platform, and no further competitive process is anticipated beyond the call order placement against the approved BPA contracts.
Convention and Trade Show Organizers

POSTED

1 day ago

DEADLINE

in about 2 hours
View Details
NAICS: 334111
New
Federal
Upgrade video wall for TEOCC in Bldg 714 Yokota AB, Japan
Solicitation # FA520926Q037A
This solicitation, numbered FA520926Q037A, is a combined synopsis and solicitation issued under FAR Part 12 for the procurement and installation of a modernized video display wall and associated audiovisual, IT, and operations center infrastructure at the 5th Air Force Tactical Enterprise Operations Coordination Center (TEOCC) in Building 714, Yokota Air Base, Japan. The requirement centers on deploying a high-fidelity 6600 1.2mm LED video wall configured with a JITC Quantum Ultra II 4K Video Wall Processor, integrated unclassified and classified video teleconferencing systems supporting SIPR and CENTRIX networks, fourteen secure operator consoles with TEMPEST-compliant KVM switching and cable management, and a custom conference table for executive briefings. The acquisition is unrestricted with no small business set-aside, and all offerors must be registered in the System for Award Management (SAM.gov) and possess a minimum SECRET security clearance for themselves and any subcontractors. The full scope is defined by the Statement of Objectives and Specifications, with equipment delivery required within 120 calendar days of contract award and full installation completed no later than six months after award. Evaluation of proposals will follow a competitive subjective tradeoff best value approach, where technical approach serves as a mandatory pass/fail gate—only proposals rated acceptable will proceed to evaluation for price and past performance, each weighted approximately equally at around 50%. Offers must be structured into four distinct parts: Summary and Miscellaneous Data including SAM.gov certifications and pricing exhibits; detailed price quotes for CLIN 0001; a comprehensive technical approach demonstrating understanding and execution of the SOO; and up to five relevant past performance references completed within the last five years. Proposals must be submitted electronically to both Tyrie Tanaka and Nicholas McGrath by 1300 Japan Standard Time on August 11, 2026. Contract administration requires compliance with MIL-STD-130 and MIL-STD-129 for item unique identification and packaging, using two-dimensional Data Matrix symbology and machine-readable verification methods. Payments will be processed exclusively via WAWF, with no contract financing provided, and all contractor personnel must comply with U.S. Air Force installation access protocols, antiterrorism training, and Japan-specific labor and force protection regulations. The contract incorporates numerous FAR and DFARS clauses addressing security, trafficking in persons, whistleblower protections, subcontractor responsibilities, and
Electronic Computer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 811210
New
Federal
Inspection and Maintenance of Electric Gate Systems at Yokota Air Base, Japan
Solicitation # FA520926Q0028
The contract seeks qualified contractors to perform inspection and maintenance of electric gate systems at Yokota Air Base in Fussa, Japan, under an Indefinite Delivery Indefinite Quantity (IDIQ) framework with a five-year period of performance from October 1, 2026, through September 30, 2031. The scope includes monthly preventive maintenance, emergency service repair calls, reimbursement for parts, and Level II repairs or installations exceeding 50 man-hours, all governed by a detailed Performance Work Statement. Contractors must provide all labor, tools, equipment, and materials, and employ personnel holding either a 1st or 2nd Class Electrician license or a 1st grade/advanced grade Certified Skilled Worker of Machine Maintenance certification as mandated by Japanese law. Performance is evaluated based on strict thresholds: 95% completion of monthly maintenance, 100% satisfactory service calls, and 100% submission of written reports within 24 hours of completion, with all work subject to government inspection and acceptance by the Government Representative. Technical proposals must meet a pass/fail standard, and award will go to the lowest technically acceptable offer, with pricing submitted in Japanese Yen for CLINs 0001 and 0002, while CLINs 0003 and 0004 are optional to price. Contract administration requires electronic payment submissions via Wide Area Workflow, compliance with DFARS and FAR clauses including security prohibitions, safeguarding of covered information systems, antiterrorism training, and electronic submission of certifications through SAM.gov. Contractors must adhere to U.S. Air Force and Department of Defense safety standards including AFI 31-204, AFOSH, EM 385-1-1, and NFPA 241, conduct daily safety briefings, and maintain strict controls over government-issued keys. All work must be performed in compliance with installation security directives, and offers must be submitted in three parts by July 31, 2026, with mandatory documentation including CAGE codes, SAM certifications, license copies, and completed SF 1449 forms. The estimated contract value ranges from $1,000 to $348,000 over the life of the contract, and funding is not yet available.
Electronic and Precision Equipment Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 237990
New
Federal
Sources Sought - Multiple Award Construction Contract (MACC) U.S. Army Installations within Honshu, Japan and Yokota Air Base & its Geographically-Separated Units (GSUs), Japan
Solicitation # FA520927RNEWMACC
The U.S. Army is seeking information from qualified contractors for a Multiple Award Construction Contract (MACC) to support construction and maintenance projects at installations across Honshu, Japan, including Yokota Air Base and its geographically separated units. This sources sought notice, issued under solicitation number FA520927RNEWMACC, aims to gather market feedback to shape the upcoming procurement strategy for long-term facility infrastructure work. The NAICS code 237990 indicates the scope covers other heavy and civil engineering construction, with no set-aside designated, leaving the contract open to all eligible vendors. Interested parties must respond by August 17, 2026, and are encouraged to attend a vendor fair on August 28, 2026, at the Fussa Civic Hall in Tokyo, where government representatives will detail the MACC structure, upcoming project pipelines such as Water Line Phase B, Airfield Light projects, and Tower 3000, as well as other initiatives like the SABER acquisition and BPAs for fall protection and tower units. Pre-registration for the vendor fair is required via a Google Form by the stated deadline, though those who have already expressed interest to the primary or alternate point of contact are exempt. Primary contact for inquiries is Kenji Urasaki, with Yuki Watabe as the secondary point of contact, both reachable via phone and email listed in the posting.
Other Heavy and Civil Engineering Construction

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 237990
New
Federal
Source Sought - Simplified Acquisition Base Engineering Requirements (SABER)
Solicitation # FA520927RNEWSABER
The U.S. Government is seeking information on the Simplified Acquisition Base Engineering Requirements (SABER) program, which will encompass maintenance, repair, and minor construction services across Yokota Air Base and various off-base locations in Japan, including geographical separated units and remote sites such as Chitose and Itazuke. The contract is intended to support critical infrastructure needs through a multiple award construction contract approach, with work expected to be performed primarily at Yokota but extending to other designated locations throughout the country. This sources sought notice, posted on July 29, 2026, and responding by August 17, 2026, aims to gather industry capabilities and interest before issuing a formal solicitation under NAICS code 237990. A vendor fair is scheduled for August 28, 2026, at the Fussa Civic Hall in Tokyo to provide potential contractors with an overview of the SABER acquisition and related opportunities, including three major open market projects and a blanket purchase agreement for fall protection devices. Government representatives will outline procurement strategies, timelines, and expectations to help industry prepare for upcoming solicitations. Interested parties are required to pre-register via a provided Google Form, unless they have already communicated intent to the primary or secondary point of contact, Yuki Kobayashi or Hiroshi Yoshikawa, who can be reached through U.S. Air Force channels. The notice does not establish a contract or obligation but serves as a preliminary step to shape the upcoming competitive procurement process.
Other Heavy and Civil Engineering Construction

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 541611
New
Federal
Incident Reporting and Safety Compliance CoordinationThis contract requires the contractor to serve as the primary point of contact for reporting any incidents involving damage, injury, or death that occur during performance of the work. Immediate verbal notification must be provided to the Contracting Officer within 24 hours of identifying such an incident, followed by a detailed written report submitted no later than 96 hours after the event. The contractor is responsible for ensuring timely and accurate communication to meet these critical reporting deadlines, reflecting a strong emphasis on safety accountability and situational awareness. Failure to comply with these requirements may result in contractual penalties or performance issues. The work is performed under a subcontract classified under NAICS code 541611, which pertains to management consulting services, and is associated with the Department of Defense through the office labeled FA5209 374 Cons Pk. The place of performance is located in Zama-shi, indicating the operational scope is tied to a specific international location. Although no solicitation number or point of contact details are provided, the opportunity was posted on July 30, 2026, with responses due by August 20, 2026, suggesting a tight turnaround for submission and readiness to begin work shortly after award. This contract demands strict adherence to safety protocols and prompt incident response as core obligations.
Administrative Management and General Management Consulting Services

POSTED

7 days ago

DEADLINE

in 14 days
View Details
NAICS: 541360
New
Federal
GPR Surveillance, Camp Zama, Japan
Solicitation # FA520926Q0074
The U.S. Department of Defense intends to award a firm-fixed price contract for comprehensive subsurface utility mapping and anomaly screening using Ground Penetrating Radar (GPR) at Camp Zama, Japan, with an expected award date of around 10 September 2026. The requirement is being pursued directly under FAR 12.201-1(c)(2), and the contractor must conduct surveys along designated vehicular-accessible roadways using a vehicle-mounted, multi-channel GPR system to detect, identify, and map the horizontal position and estimated depth of underground utilities and anomalies. All data must be processed into a 2D GIS database strictly based on GPR signatures, adhering to U.S. Department of Defense directives including DoDI 8130.01, SDSFIE-V, EM 1110-1-2909, ASCE 38-02, EM 385-1-1, and applicable Japanese laws. All work must be performed exclusively in Japan, with the contract price covering all travel and lodging expenses. Key personnel must meet stringent qualification requirements issued solely by U.S. or Japanese governmental authorities. The Project Manager must hold either a Japanese “Gijutsu-shi” license from MEXT or a U.S. Professional Engineer license. The Project/Site Lead must possess an OSHA 30-Hour Construction certificate or a Japanese “Oxygen-Deficient/Hydrogen-Sulfide Hazard Work Chief” certification. Data Analysis Personnel require a minimum of five years of verified GPR utility mapping experience under U.S. or Japanese industrial standards, and the Land Surveyor must be a registered Japanese “Sokuryo-shi” authorized by GSI or a licensed U.S. Professional Land Surveyor. Official documentation proving all credentials must be submitted prior to award, and only U.S. or Japanese government-issued credentials are acceptable. Non-Japanese offerors must demonstrate a verifiable partnership with a local Japanese service provider capable of fulfilling warranty obligations, providing full contact details for that entity. U.S. vendors are subject to DFARS clause 252.225-7976, requiring contractor personnel and dependents to be registered in SPOT to qualify under the Status of Forces Agreement.
Geophysical Surveying and Mapping Services

POSTED

7 days ago

DEADLINE

in 14 days
View Details