Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BITE STICK, DENTAL

Active
SPE2DH-26-T-5752Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of orangewood dental bite sticks, large size, with a diameter of 3/16 inch and a length of 6 inches, under the NSN 6520-01-590-8437. The unit of issue is a package containing 20 pieces, and the total quantity ordered is one package. All units must be packaged in sealed, commercial-grade containers that protect against damage or breakage, with exterior shipping containers compliant with commercial standards and suitable for safe delivery via common carrier at the lowest cost to Beale AFB, CA, 95903-1908. Packaging and marking must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and suppliers are directed to obtain the current standard via DLA Troop Support or its official website. The product falls under the NAICS code 333310 and is subject to technical and quality requirements listed in the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date. Government identification must be removed from non-accepted supplies, and all bids must include the source and part number being supplied. The solicitation was issued on August 3, 2026, with a proposal deadline of August 10, 2026, and delivery is required within 20 days after order. The primary point of contact is Tina Vu of the Department of Defense, Medical Supply Chain FSH.

General Info

Orangewood dental bite sticks, large size, 20 pcs/package, sealed packaging, delivery to Beale AFB by August 30, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

15301 WARREN SHINGLE RD BLDG 5700, BEALE AFB, CA, 95903-1908, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5752.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BITE STICK,DENTAL
BITE STICK,DENTAL
ORANGEWOOD, LARGE,3/16 INCH DIAMETER
BY 6 INCHES LENGTH.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
UNIT OF ISSUE: PACKAGE (20 EA/PG)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
1 PG = 20 EA
..
SPE2DH-26-T-5752
SECTION B
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-590-8437 Quantity: 1 PG Purchase Request: 7017711011QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
BEAD BREAKER, TIRE
Solicitation # SPE7LX-26-U-9158
The contract is for the procurement of 67 units of a tire bead breaker, identified by NSN 4910-00-788-0591 and part number 35926 from Summit Tool Company and 70150 from Jordan Equipment Supply. The item is covered under DLA Direct, CONUS, with a delivery requirement of 43 days FOB origin, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point, and all packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization conforming to DLA’s RP001 packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over all other standards, and all non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contract is a Women-Owned Small Business Set-Aside under NAICS 333310, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact. Unit price is $67.00 per unit, totaling $4,489.00, and the solicitation number is SPE7LX-26-U-9158 with a response deadline of August 18, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
BINOCULAR
Solicitation # SPE7L7-26-T-4549
This contract specifies the procurement of 113 units of Nikon 7x50 CF WP Global Compass binoculars under solicitation SPE7L7-26-T-4549, issued by DLA District San Joaquin for the U.S. Department of Defense. The items are classified as a critical application item with a Type I shelf life of 60 months, non-extendable, and must comply with strict technical and quality standards referenced from the DLA Master List, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129 with a special code for delicate instruments. The binoculars feature rubber coating, a built-in compass and reticle, waterproof and nitrogen-sealed housing, light-alloy construction, and EBC-coated optics with 95 percent light transmission, and are shipped with two alkaline manganese dioxide batteries. Mercury or mercury-containing compounds are strictly prohibited except for specific functional uses such as batteries or instruments as defined by NAVSEA, with additional containment requirements for portable devices. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be verified at assigned levels. Delivery is FOB origin with a 144-day delivery window and zero tolerance for quantity variance, with inspection and acceptance occurring at the destination warehouse in Tracy, California. The contract is set aside for Women-Owned Small Businesses under NAICS code 333310, with pricing at $113.00 per unit for a total of $12,769.00.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
STAND, MAINTENANCE, AUTO
Solicitation # SPE7L3-26-T-146A
The contract is for the procurement of ten automotive engine maintenance stands, each with a 6000-pound capacity, featuring 360-degree rotation and casters, identified by NSN 4910-00-808-3372. The requirement is tied to solicitation SPE7L3-26-T-146A, issued on August 3, 2026, with responses due by August 14, 2026, and delivery expected within 157 days after award. The equipment must comply with DLA packaging requirements and incorporate technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contractor is also responsible for overpacking one copy of the manufacturer’s commercial manual covering operation, service, maintenance, and repair instructions. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support, with Matthew Curry as the primary point of contact for inquiries.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
LEVEL
Solicitation # SPE7L4-26-T-5963
The contract involves the procurement of a single unit of an item identified by NSN 1005-01-191-8726 under solicitation SPE7L4-26-T-5963, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within five days after order placement (5 DAYS ADO), with FOB Origin terms, and performance is governed by stringent compliance standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding. The item is subject to export control under ITAR or EAR, requiring adherence to strict handling protocols, including prior authorization for technical data disclosure to foreign persons, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export training, and formal authorization. Cybersecurity compliance is mandated through DFARS 252.204-7012, requiring Safeguarding of Covered Defense Information and Cyber Incident Reporting aligned with NIST SP 800-171, and all contractors must comply with CMMC Level 2 requirements as a certified third-party assessment organization. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, whistleblower rights, subcontracting for commercial items, and prohibition on covered telecommunications equipment, alongside mandatory use of WAWF for all invoicing and receiving report submissions. Packaging must meet specific DLA packaging requirements, with no preservation materials used and dry methods applied per the technical data. Inspection and acceptance occur at origin by the Government’s Quality Assurance Representative, with all technical and quality requirements sourced from the DLA Master List of Technical and Quality Requirements identified by R and I numbers. Pricing is estimated at $450 based on prior award history, though current contract line item data remains unfilled. The offeror must affirm size status, socioeconomic certifications, and UEI/CAGE codes, with additional disclosures required if providing covered defense telecommunications equipment or engaging in a joint venture. All proposals must be submitted electronically via DIBBS by August 14, 2026, and contain no hardcopy submissions.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
ADAPTER, SLING
Solicitation # SPE7LX-26-U-9162
The item specified is an ADAPTER, SLING with NSN 4910-00-139-7599, with a quantity of five units to be delivered within 90 days of award under solicitation SPE7LX-26-U-9162. This procurement is a Total Small Business Set-Aside under NAICS code 333310, managed by the Department of Defense’s Strategic Acquisition Program Directorate. The technical data associated with this item is subject to export control under either ITAR or EAR, and its dissemination is strictly limited to contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD export control training, and have been formally authorized by DLA to handle such data. Disclosure of this technical data to foreign persons, including foreign national employees or subsidiaries of U.S. companies, is prohibited without prior government authorization. Contract performance is governed by DFARS 252.225-7048, ensuring compliance with all export control regulations. The solicitation was posted on August 3, 2026, with responses due by August 18, 2026, and primary point of contact is Theodore Misiolek at the provided email and phone number.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333310
New
DIBBS
MAGNIFIER
Solicitation # SPE7L7-26-T-4555
The contract specifies the procurement of 33 units of a 5-diopter magnifier lamp with a gray-colored housing, featuring a 22-watt fluorescent tube, clamp-on mounting, a 5-inch diameter, 13-inch focal length, and a 45-inch nominal reach, manufactured by Dazor Manufacturing Corp. under part number LMC200-5-DG and supplied by Luxo Lamp Corp. This is a critical application item classified as commercial off-the-shelf with adequate catalog data available for evaluation. The item must comply with stringent DLA packaging and marking standards, including MIL-STD-2073-1E for prep for delivery, MIL-STD-129 for labeling, and special fragile marking, with all packaging adhering to RP001 requirements and palletization guidelines. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with zero non-conformances required unless otherwise stated, and all attributes are subject to defined verification levels. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent, and inspection and acceptance occur at destination after a 157-day delivery window. The NSN is 6650-00-477-9613, and delivery must be made to the DLA Distribution Depot in Tinker AFB, Oklahoma, by the required date of May 20, 2027, with an original need date of January 19, 2027. The contract is issued under solicitation SPE7L7-26-T-4555 and incorporates all technical and quality requirements referenced in the DLA Master List, with compliance controlled by the version in effect on the solicitation issue date.
DEPOT OKLAHOMA

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE7L3-26-T-125C
This contract is for the procurement of a Parts Kit, Seal Replacement (NSN 2590-01-687-0498), with a quantity of seven units, issued under a Total Small Business Set-Aside solicitation (SPE7L3-26-T-125C). Deliveries are required FOB Origin, with a 174-day delivery window following contract award, and the sole delivery point is the DLA Distribution New Cumberland Facility in Pennsylvania. The kit must comply with rigorous military packaging and preservation standards, specifically MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129 with no special markings required beyond standard barcoding. All packaging, including palletization, must meet DLA-specific requirements (RP001), with the contractor responsible for selecting appropriate preservation, wrap, and cushioning materials under the ZZ and Z codes. Strict prohibitions are in place against the use of Class I ozone-depleting chemicals, and any substitute chemicals not explicitly authorized by specification must be submitted for approval. The contract incorporates extensive FAR and DFARS clauses governing cybersecurity (NIST SP 800-171, safeguarding covered defense information), subcontracting for commercial items, inspection at destination, prohibited materials such as hexavalent chromium, export control, and whistleblower rights, with deviations applied to multiple clauses. Payment must be processed exclusively through Wide Area WorkFlow (WAWF), and all offerors must be small businesses as defined by SBA size standards and provide valid UEI and CAGE codes. The solicitation mandates electronic submission via DIBBS by the deadline, with technical and quality requirements tied to the DLA Master List referenced under RA001. No contract value is explicitly stated due to unprovided pricing data, and the award will be based on compliance with socioeconomic and technical requirements, reflecting an LPTA or price-focused methodology typical of simplified acquisitions. All performance, inspection, and acceptance occur at the destination, and the government retains full authority to inspect upon receipt.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
CHAIR, TRANSFER AT SEA
Solicitation # SPE8E6-26-T-3965
The contract is for the procurement of 16 units of a CHAIR, TRANSFER AT SEA with NSN/Part Number 4220-00-369-4531 under solicitation SPE8E6-26-T-3965, with a response deadline of August 14, 2026, and a delivery requirement of 189 days after award. The item is classified under NAICS code 333310 and is being procured by the DLA Dist San Joaquin under the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and solicitation timeline. The product is not subject to shelf life restrictions. The contract imposes strict cybersecurity and export controls; vendors must be CMMC Level 2 certified as a C3PAO and adhere to covered defense information requirements. Technical data associated with the item is subject to export control under either ITAR or EAR, requiring prior federal authorization for any disclosure to foreign persons, regardless of location, and applies to U.S. entities and their foreign subsidiaries. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD training, and formal approval from DLA. Packaging must meet DLA standards, and all government identification must be removed from non-accepted supplies. The place of performance is Tracy, California, with John Lieb as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
AIR CAP, SPRAY GUN
Solicitation # SPE7M4-26-T-273V
The contract is for the procurement of five Air Cap, Spray Gun units with NSN 4940-00-236-4287 under solicitation SPE7M4-26-T-273V, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 20 days after order issuance to the ROKAF LC Consolidated Supply Depot in Seosan, South Korea, with FOB Origin terms meaning title and risk transfer upon shipment from the contractor’s location. The contract enforces strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, labeling, and barcoding, with no special marking required beyond standard government identifiers. Inspection and acceptance occur at the origin point, governed by FAR 52.246-2, and all technical and quality requirements referenced by R or I numbers must be met per the DLA Master List. Packaging must be palletized per DLA’s RP001 requirements, and preservation methods include drying and clamping with specific materials designated as ZZ and 00 respectively. The unit of issue is EA, with a zero variance allowance on quantity. The contract includes mandatory clauses covering cybersecurity, supply chain integrity, labor compliance, and safeguarding of government information, such as 52.240-93, 52.222-50, 52.222-54, and 252.204-7012, with deviations noted for several DFARS clauses. Offerors must submit valid UEI and CAGE codes, represent their small business status and socioeconomic certifications if applicable, and disclose any suppliers of covered defense telecommunications equipment. Invoicing must be processed electronically via WAWF using the Invoice and Receiving Report format. While pricing fields in the CLIN are left blank, the contract is structured as a Firm-Fixed-Price arrangement under simplified acquisition procedures, with award likely following a Lowest Price Technically Acceptable methodology. Special requirements mandate compliance with 29 CFR 1910.1200 for hazardous material labeling where applicable, and all documentation must align with DoD standards for accountability, traceability, and delivery to a foreign military customer. The contract references no formal section C Statement of Work, relying instead on referenced standards and specifications embedded throughout the document.
FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
FILLER NECK, VEHICUL
Solicitation # SPE7L1-26-T-906Z
The contract specifies the procurement of one filler neck for vehicle use under solicitation SPE7L1-26-T-906Z, with a required delivery within five days of award, delivered FOB origin. The item is identified by NSN 2590016923152 and part number 7017707038, and must comply with multiple technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications including ASTM D3951. The product must be manufactured in accordance with designated technical data packages tied to specific reference drawings dated between 2019 and 2024, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes requiring prior approval. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with unit packaging following the specified QUP and palletization rules. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at 9922 Beumont Road, Building 122, Indianapolis, IN 46216-1091, marked with the government identifier W90XJU and shipment control codes including RDD N and PROJ TP 1. The required delivery date is July 31, 2026, and the contract is governed by Department of Defense procedures under the NAICS code 333310, administered by the Land Supply Chain, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-607S
The contract pertains to the procurement of 106 units of CAP, LENS with NSN 5855-01-609-5741 under solicitation SPE4A7-26-T-607S, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as a commercial off-the-shelf product with no shelf life requirement, and the procurement is supported by adequate commercial catalog data. The delivery must be completed within 10 days after delivery order issuance, and the solicitation response deadline is August 11, 2026, with the posting date of August 3, 2026. Technical and quality requirements referenced in this contract are drawn from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, and the applicable revision is determined based on the solicitation or award date depending on acquisition size. Sampling and inspection procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, unless otherwise directed by the contract. Attributes identified as critical, major, or minor on drawings or specifications must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are to be treated as major. Manufacturers may choose either attribute or variable inspection methods under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but acceptance requires zero non-conformances unless explicitly waived. Packaging must meet DLA standards, and government identification must be removed from any non-accepted supplies. The point of contact for inquiries is Michael Johnson, reachable via email and phone listed in the contract data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
DIBBS
SIGHT, REFLEX
Solicitation # SPE7M1-26-T-247Q
The contract pertains to the procurement of the Sight, Reflex item identified by NSN 1240-64-001-0197 and part number 404061258, manufactured by SAAB DYNAMICS AKTIEBOLAG, with technical compliance governed by specific drawing revisions dated 03/18/2021 and 08/22/2023, and reference to the original drawing 19200 12579607 Revision C. Supply requirements are strictly bound to the cited source-controlled drawings, and only approved sources listed on those drawings may be used unless otherwise authorized; potential suppliers seeking qualification must contact the cognizant design activity. All items must adhere to DLA’s packaging mandates under RP001 and marking specifications per MIL-STD-129, including the special fragile marking code 01, with packaging conforming to MIL-STD-2073-1E and parcelization instructions. The contract mandates 18 units delivered FOB origin within 264 days from contract award, with zero tolerance for quantity variance, and inspection and acceptance occurring at point of origin. Transportation and delivery are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with detailed logistical guidance referenced in DLAD PROC NOTES C19 and C20. The solicitation was issued on August 3, 2026, with a response deadline of August 14, 2026, under contract number SPE7M1-26-T-247Q, and the unit price is $18.00 per EA, totaling $324.00. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, with revisions governed by applicable acquisition thresholds and amendment dates.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 326199
New
DIBBS
Biohazard Disposal Bag Supply
All Other Plastics Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Packaging & Shipping for Regulated Medical GoodsThe contract requires strict adherence to federal and international regulations for the packaging, certification, and documentation of regulated dental materials destined for shipment under 49 CFR, ICAO, or IMDG standards. All activities must ensure full compliance with hazardous materials handling protocols to guarantee safe transport and regulatory approval across all modes of transit. Performance is mandated to occur in Suffolk, Virginia, with the ZIP code 23435-5000 as the designated place of performance, and the contract falls under NAICS code 493190, indicating it is a subcontract within the other support activities for transportation sector. The responsible agency is the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 10, 2026, and the solicitation was posted on August 3, 2026, underscoring a tight turnaround for qualified subcontractors to submit proposals meeting all technical and regulatory demands.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Regulatory Compliance & Labeling ServicesThe contract requires the preparation and certification of hazard communication labels and Safety Data Sheets for dental restorative materials, ensuring full compliance with OSHA’s Hazard Communication Standard and Defense Logistics Agency requirements. This work must be performed to meet federal safety and regulatory standards for chemical hazard disclosure, with a focus on accurate representation of risks, protective measures, and handling instructions specific to dental applications. All documentation must be technically sound, consistently formatted, and submitted in alignment with regulatory expectations to support safe usage across military medical supply chains. The task is under a subcontract solicitation issued by the Department of Defense through the Medical Supply Chain FSH office, with performance location specified as Suffolk, Virginia, 23435-5000. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026. The NAICS code 541690 indicates this service falls under Other Scientific and Technical Consulting Services, emphasizing the need for specialized regulatory expertise. While the point of contact and set-aside details are not provided, the contract is open for bid under a subcontract arrangement with no set-aside classification specified.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 325193
New
DIBBS
Dental Restorative Material SupplyThe contract solicits the supply and delivery of glass ionomer restorative dental material in capsule form, specifically the GC Fuji Triage Capsule Package – Pink, with each package containing 50 capsules. This procurement is part of a subcontract under the NAICS code 325193, which pertains to other pharmaceutical and medicinal product manufacturing, and is managed by the Department of Defense through its Medical Supply Chain FSH. The material is intended for use in dental restorative procedures and must meet specified quality and packaging standards as outlined in the solicitation. Delivery is required to the place of performance in Suffolk, Virginia, with a ZIP code of 23435-5000. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026. The contract is not designated with any specific set-aside classification, meaning it is open to all eligible contractors. Interested parties must submit proposals through the DIBBS platform using the provided link, and vendors are expected to comply with all federal procurement requirements applicable to Department of Defense contracts. Timely delivery and adherence to product specifications are critical to ensure operational readiness of dental services within military medical facilities.
Ethyl Alcohol Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
DIBBS
Supply of Chemical Detection Chip for Ammonia (NSN 6640-01-497-5784)The contract is for the supply of a single commercial off-the-shelf chemical detection chip specifically designed to detect ammonia, identified by NSN 6640-01-497-5784. This is a direct COTS procurement with no requirements for assembly, integration, or ancillary services, emphasizing a straightforward acquisition of an existing, ready-to-use component. The procurement is classified as a subcontract under NAICS code 334519, indicating it falls within other electronic component manufacturing, and is managed by the Medical Supply Chain FSH under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 10, 2026. The place of performance is listed as APO with zip code 96260-5479, indicating delivery to a military address overseas. No set-aside provisions apply, and no point of contact is provided in the data. The contract can be accessed via the DIBBS system using the provided link, and the acquisition is purely for the delivery of the specified chip without any additional obligations or customization.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
TRAY, SAMPLE, AUTOMATED
Solicitation # SPE2DH-26-T-5746
The tray for automated analysis is a sterile, single-use product designed for rapid and accurate quantification of coliforms, E. coli, enterococci, Pseudomonas aeruginosa, and heterotrophic plate counts in laboratory settings. Each package contains 100 trays and is intended for use in microbiological testing procedures requiring high reliability and consistency. The product must have a shelf life of 36 months from the date of manufacture, with no more than five months elapsed between manufacturing and delivery to the government. Labels must clearly display the NSN, manufacturer name and CAGE code, date of manufacture or expiration, and the contract or lot number to ensure traceability and compliance. The product is governed by specific technical and quality requirements identified under RA001, which references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA requirements as outlined in RP001, and non-accepted supplies must have all government identification removed in accordance with RQ011. The NSN for this item is 6640-01-695-5838, and the solicitation number is SPE2DH-26-T-5746, issued by the Department of Defense under the Medical Supply Chain FSH. The delivery location is Fort Knox, Kentucky, with a 20-day ADO timeline, and the point of contact is Tina Vu, with details provided for email and phone. The NAICS code is 333248, indicating this falls under laboratory machinery and equipment manufacturing.
All Other Industrial Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,
Solicitation # SPE2DH-26-T-5737
The contract is for the procurement of 35 disposal containers designed specifically for the safe handling and disposal of hypodermic needles and syringes. Each container measures between six and seven inches in length and one to two inches in diameter, featuring a securable cap and a lift-off cover to ensure containment and prevent accidental exposure. The product must comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6530-01-645-6923 and is subject to controls related to covered defense information. The solicitation was issued under number SPE2DH-26-T-5737, with responses due by August 10, 2026, and delivery required within 20 days of award to Fort Bragg, North Carolina, 28310. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
BOARD, CARDIAC
Solicitation # SPE2DH-26-T-5738
The contract is for a single unit of a heavy-duty plastic cardiac board measuring 15 1/2 inches by 21 1/2 inches by 3/4 inch, identified by NSN 6530-01-716-9177, to be delivered within five days of award. All packaging and packing must comply with commercial standards as specified in the procurement document, requiring each unit to be sealed in a container that protects against damage or breakage and shipped in exterior containers suitable for safe transit by common carrier at the lowest possible cost to Joint Base Charleston, South Carolina. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date. The solicitation, issued under number SPE2DH-26-T-5738, was posted on August 3, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 331313
New
DIBBS
BOTTLE, SAFETY CAP
Solicitation # SPE2DH-26-T-5760
The contract pertains to the procurement of a child-resistant safety cap designed for 4-ounce liquid containers, specified as amber-colored plastic with an oval shape and light-resistant properties. Each unit of issue is a package containing 90 caps, and the requirement is for one such package. The item is identified by the NSN 6530-01-562-7274 and is part of a solicitation issued under SPE2DH-26-T-5760, with a response deadline of August 10, 2026, and a required delivery within 20 days after award. Suppliers must provide their source and part number, and compliance with DLA Packaging Requirements and technical quality standards referenced in the DLA Master List is mandatory, with the applicable revision determined by the solicitation date. The place of performance is APO 09094-3219, and the purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Alumina Refining and Primary Aluminum Production

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
CARVER, DENTAL
Solicitation # SPE2DH-26-T-5747
The contract pertains to the procurement of Carver dental products, specifically a double-ended amalgam and wax instrument with a length range of 6.438 to 6.562 inches, supplied in units of each. The national stock number is 6520-01-346-1193, with a quantity of ten units required under purchase request 7017284465. Delivery must be completed within 20 days after award. Technical and quality standards referenced under R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. The procurement is subject to DLA packaging requirements and provisions for the removal of government identification from non-accepted supplies. Covered defense information may apply, and bidders must specify the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5747, was posted on August 3, 2026, with responses due by August 10, 2026. It falls under NAICS code 339114 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance required at Fairchild AFB, Washington, 99011-8704. Primary point of contact is Tina Vu, reachable via email and phone provided.
Dental Equipment and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAY, COUNTING, TABLET A
Solicitation # SPE2DH-26-T-5754
The contract specifies the procurement of 10 counting trays designed for tablets and capsules, each unit featuring a mechanism to separate exact dosages and return excess doses to the original container, along with a spatula and compatibility with medication vials. All units must be packaged commercially as outlined in the procurement document, with each tray sealed in a protective container to prevent damage or breakage, and shipped in commercial exterior containers suitable for safe delivery by common carriers at the lowest cost to the designated destination. Marking must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The item, identified by NSN 6530011688096 and part number 23087 from Apothecary Products, LLC, is subject to strict packaging requirements aligned with MIL-STD-2073-1E, and delivery is required FOB destination within 20 days with zero variance allowed in quantity. Inspection and acceptance occur at the point of delivery, and the contract falls under DLA’s procurement system with specific technical and quality requirements referenced from the DLA Master List. The solicitation number is SPE2DH-26-T-5754, posted on August 3, 2026, with responses due on August 10, 2026, and performance is scheduled for Columbus, Mississippi.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PLUG, SUCTION LINE
Solicitation # SPE2DH-26-T-5756
The contract is for the procurement of six PLUG, SUCTION LINE units specifically designed for the Isolite illuminated dental isolation system, with part number EIL0201 and dimensions of 1.97 inches in length and 1.21 inches in diameter. Each unit is sold individually, and the National Stock Number is 6520-01-669-0782, with a purchase request number of 7017711953. The delivery requirement is set for five days after order award, and the solicitation number is SPE2DH-26-T-5756, with a response deadline of August 10, 2026. The procurement is under the Department of Defense’s Medical Supply Chain FSH, with performance located in Suffolk, Virginia, and the primary point of contact is Tina Vu, reachable via email and phone. This contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Covered defense information potentially applies, and DLA packaging standards must be followed. Bidders are required to specify the source and part number being supplied, and any non-accepted supplies must have government identification removed prior to delivery. The NAICS code is 339113, indicating medical equipment and supplies manufacturing, and all bids must comply with federal procurement policies and DLA packaging and identification regulations.
Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details