Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BLADE SET, COMPRESSO

Active
SPE4A6-26-T-14LUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a blade set for a compressor, specifically designated as non-aircraft use, with the NSN 2835-01-538-6191 and part number 10-10011-01 supplied by Vericor Power Systems LLC. The order quantity is one set, with delivery required within 20 days from the contract award, FOB origin, and inspection and acceptance to occur at the destination. The item must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, with no special marking required. Each blade must be individually protected to prevent contact or damage during transit, and packaging must adhere to DLA’s procurement packaging requirements, including prohibition of mercury or mercury-containing compounds in preservation, packaging, and marking. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and critical, major, and minor attributes must be verified at specified levels. The contract forbids intentional addition of mercury except in specific exempted applications such as functional batteries or sensors, and portable mercury-containing devices must have dual containment per NAVSEA guidelines. Shipment must be sent via the fastest traceable means, excluding parcel post, to the designated Marine Corps Base Camp Pendleton address, using government-authorized transportation protocols. The material has no shelf life requirement, and item unique identification is not mandated under DFARS provisions. The solicitation, issued by the Department of Defense’s ASC Commodities Division, was posted on August 9, 2026, with responses due by August 17, 2026, under contract SPE4A6-26-T-14LU.

General Info

One blade set for non-aircraft compressor, FOB origin, delivereed in 20 days, compliant with MIL-STD packaging and no mercury allowed.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

MARINE CORPS BASE BLDG 31916, CAMP PENDLETON, CA, 92055-5003, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14LU for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ANTONIA Willcox
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLADE SET,COMPRESSO
BLADE SET, COMPRESSOR, NON-AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
VERICOR POWER SYSTEMS LLC 1N8S8 P/N 10-10011-01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-14LU
SECTION B
PR: 7017688249 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688249 0001 SE 1.000
NSN/MATERIAL:2835015386191
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
EACH BLADE IN THE SET SHALL BE PROTECTED FROM CONTACT/DAMAGE FROM OTHER BLADES
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
R45411
ASSAULT CRAFT UNIT ACU 5
COMM 760 725 2280 DSN 365 2280
MARINE CORPS BASE BLDG 31916
CAMP PENDLETON CA 92055-5003
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R45411
ASSAULT CRAFT UNIT ACU 5
TRAFFIC MANAGEMENT OFFICE
MARINE CORPS BASE BLDG 31916
CAMP PENDLETON CA 92055
US
SPE4A6-26-T-14LU
SECTION B
PR: 7017688249 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R4541162040221
RDD: 777
PROJ: LE5 TP 2
SUPP ADD: YH4895 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A4A DIST: V9B ADV: 2L FC: KZ
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE4A6-26-T-14LU NSN/Part Number: 2835-01-538-6191 Quantity: 1 SE Purchase Request: 7017688249QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
SHROUD SEGMENT, TURB
Solicitation # SPE4A5-26-T-336T
The contract pertains to the procurement of a SHROUD SEGMENT, TURB with NSN 2840-01-689-4843 and part number 5200T09G09, under solicitation SPE4A5-26-T-336T. A total of 73 units are required at a unit price of $73.00, with full payment due upon delivery. The item must be delivered FOB origin within 166 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin, and all items must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containment, with marking adhering to MIL-STD-129 and no special marking codes applied. Packaging and palletization must conform to DLA’s procurement requirements, and delivery is directed to DLA Distribution Cherry Point in North Carolina. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and attributes must be verified at specified acceptance quality levels. The item is subject to removal of government identification if not accepted, and physical identification must be marked per RQ017. The unit of issue is each (EA), and transportation logistics follow DLA procedural notes C19 and C20. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 25, 2027, with a need ship date of January 31, 2027. The contracting office is under the Department of Defense, with Kirstie Ragsdale listed as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SCREEN
Solicitation # SPE4A6-26-T-14QR
The SCREEN item with NSN 2835-01-092-4406 is subject to strict export control under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed or transferred to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on handling export-controlled technical data, and have been formally approved by DLA. Only qualified vendors meeting these criteria may respond to this solicitation. The procurement request number is 7014381247 for a quantity of fifty units, with delivery required 137 days after order placement. The solicitation number is SPE4A6-26-T-14QR, posted on August 9, 2026, with proposals due by August 17, 2026. The North American Industry Classification System code is 333611, under the Department of Defense’s ASC Commodities Division. The place of performance is in New Cumberland, Pennsylvania, zip code 17070-5002. All inquiries must be directed to Sibel Claywell at sibel.claywell@dla.mil or 804-279-6252. Proposals must be submitted via the DIBBS portal using the provided link, and no set-aside designation applies to this solicitation.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
RETAINER, COMPRESSOR
Solicitation # SPE4A7-26-T-632X
This contract pertains to the procurement of a RETAINER, COMPRESSOR with part number 5002083-01 and NSN 2840016676742, for a quantity of 323 units at a unit price of $323.00, resulting in a total contract value of $104,329. The item is classified as a Critical Application Item and must comply with stringent technical and quality requirements referenced in DLA Procurement Note L32, which supersedes higher-level contract quality standards. All technical and quality provisions are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on solicitation or award dates depending on acquisition size. The contractor is required to maintain supply chain traceability documentation per DLA Directive Procurement Note C03 and adhere to FAA-specific marking and airworthiness approval standards, as well as CMMC Level 2 cybersecurity self-assessment requirements. The item must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletized per DLA packaging rules. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. Delivery is due within 166 days from the contract date, with an original required delivery date of December 9, 2026, and a need ship date of January 31, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, using standardized unit of issue and transportation protocols as defined in DLAD Procurement Notes C19 and C20. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels are fixed for critical, major, and minor attributes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
TUBE, OIL DISTRIBUTI
Solicitation # SPE4A6-26-T-14KL
The contract pertains to the procurement of two oil distribution tubes with NSN 2835-00-556-0573 and part number 366452-2, supplied by Service & Sales Inc and Honeywell International Inc, for delivery to DLA Distribution San Joaquin in Tracy, California. Delivery is required within 138 days from the award date, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the items are designated as critical application components, requiring strict adherence to technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with all units packed in accordance with ASTM D3951 unless overridden by higher-priority DLA directives. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are verified at designated levels: VII for critical, IV for major, and II for minor. The unit of issue is each, and all packaging must be marked and labeled per military standards. The required delivery date is March 2, 2027, with a need ship date of January 3, 2027. Transportation guidelines are governed by DLAD Procurement Notes C19 and C20, and procurement is governed under solicitation SPE4A6-26-T-14KL, issued by the Department of Defense’s ASC Commodities Division, with primary point of contact Tyrone Gatewood.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
CUP, LOCKING
Solicitation # SPE7M4-26-T-326X
This contract is for the procurement of 111 units of a locking cup identified by NSN 2825-01-286-0057 under solicitation SPE7M4-26-T-326X, with a requirement for delivery within 165 days to the DLA Distribution San Joaquin facility in Tracy, California. Full and open competition applies, and all items must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes required. The product is classified as a critical application item with technical specifications referenced from Drawing 90099 1664C04 Revision D, and must be furnished FOB origin with zero variance in quantity. Strict environmental restrictions prohibit the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. All materials must adhere to the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The contract requires compliance with DLA transport and freight procedures C19 and C20, and the unit of issue is each (EA), with pricing and payment details tied to the purchase request 7017779993. The required delivery date is October 26, 2026, with a need ship date of February 2, 2027, under a contract awarded through the Department of Defense’s Fluid Handling Division, managed by Blake Tushar.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333611
New
Federal
Outboard Jet Motor Supply and IntegrationThe contract entails the supply and full integration of a high-performance outboard jet motor, requiring comprehensive mechanical mounting, precise control linkage installation, and a fully functional fuel system tailored for operational reliability. The work must be executed to ensure seamless compatibility with the intended vessel or platform, followed by rigorous operational testing to verify performance, safety, and durability under real-world conditions. All components and systems must meet strict technical specifications and industry standards to guarantee consistent functionality in demanding environments. This subcontract is issued by the Department of the Interior's Office of Acquisition Grants under NAICS code 333611, targeting manufacturers or integrators with demonstrated expertise in marine propulsion systems. The solicitation was posted on August 7, 2026, with responses required by August 14, 2026, at 3:00 PM. There is no specified set-aside classification, and the place of performance is not detailed, implying flexibility in execution location as long as contractual deliverables are met. The procurement seeks a proven capability to deliver and validate a complete, turnkey jet motor solution without reliance on external system dependencies.
Office Of Acquisiton Grants

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
SLED
Pump Replacement – Submersible and Sludge Pumps
City of Raleigh

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
Federal
61--Hydraulic Turbine Runner for Units A2 and N7 for H
Solicitation # 140R3026R0016
The contract solicitation 140R3026R0016 issued by the Bureau of Reclamation, Lower Colorado Regional Office in Boulder City, Nevada, seeks a contractor to furnish and install hydraulic turbine runners for Units A2 and N7 at Hoover Dam, with a period of performance spanning from December 15, 2026, to December 14, 2028. The scope of work encompasses the complete design, manufacturing, and delivery of two new turbine runners along with associated components including stationary wear rings, coupling nuts and washers, in-place machining services, air admission piping, and all required drawings, bonds, and mobilization activities. Detailed specifications, 48 pages of technical specifications, and 14 pages of engineering drawings mandate strict adherence to ASME standards including B46.1-2019, BPVC-2025, Y14.1-2020, and Y14.5-2018, with manufacturing required to use ASTM A743 Grade CF-3 material and undergo rigorous non-destructive testing protocols per ASTM A802, A903, and other relevant criteria. All components must meet exact dimensional tolerances, and any casting with more than five defects failing acceptance criteria will be rejected in its entirety. The contract imposes comprehensive compliance requirements under the Federal Acquisition Regulation, including ethical conduct provisions such as prohibitions on gratuities, contingent fees, kickbacks, and improper influence, along with mandatory adherence to a contractor code of business ethics. Offerors must submit proposals electronically by August 10, 2026, to Virginia Toledo via email, structured in three volumes covering administrative, technical, and pricing elements, with full completion of Section G.4 personnel data and submission of a detailed subcontracting plan. Payment requests must be submitted through the Treasury’s IPP system with strict formatting rules and exclusion of personally identifiable information, and the final invoice must be clearly labeled. The contractor is responsible for ensuring all employees comply with federal security protocols at Hoover Dam, including possession of government-issued identification, and must safeguard all controlled unclassified information under Reclamation Directive SLE 02-01. Prevailing wage rates apply, Buy American Act requirements govern materials, and performance and payment bonds are mandatory. Award is contingent upon meeting all solicitation terms, demonstrating responsibility under FAR Part 9, and having a fair and reasonable price, with no weighted evaluation factors specified beyond these
Lower Colorado Regional Office

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
Federal
61--CONTROL,GENERATOR, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QHA67
The contract pertains to the procurement of one unit of a generator control component, identified by NSN 7R-6110-014522467-KB, under a sole-source acquisition authorized under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition. Delivery is FOB origin, with early and incremental deliveries accepted, and all contractual documents are deemed officially issued upon electronic transmission or mailing. Only previously approved sources may respond, as the item requires specialized engineering knowledge, unique manufacturing capabilities, and proprietary technical data that are not commercially available to the Government, making qualification of alternative sources impractical within the procurement timeline. Prospective offerors not already approved must submit complete source approval documentation from the NAVSUP Weapon Systems Support brochures, detailing their experience with the same or similar items, or provide proof of a pending approval request; failure to comply will result in proposal rejection. The Government retains full discretion to award based on fleet support needs if source approval cannot be finalized in time. Solicitation responses are due by September 21, 2026, and while the procurement is not competitive by intent, all interested parties may submit capability statements within 45 days for consideration, though no competition is anticipated. Technical specifications and standards referenced are obtainable through ASSIST-Online or DODSSP, but critical engineering data such as drawings and deviation lists are not available through these channels. The contracting officer may consider proposals based on commercial items submitted within 15 days of notice, though the acquisition is not being conducted under FAR Part 12 policies.
Navsup Weapon Systems Support

POSTED

3 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333611
New
Federal
28--HARNESS ASSEMBLY
Solicitation # SPE4A526T335R
The contract solicitation seeks a single harness assembly with NSN 2835012050728, requiring a quantity of 14 units to be delivered to W1A8 DLA DISTRIBUTION within 169 days after contract award. The approved source for this item is identified as vendor 63005 with part number 23007027, and only electronic quotes will be accepted. This is a full and open competition under RFQ SPE4A526T335R, with no set-aside restrictions, allowing all responsible sources to submit responses provided they meet the deadline. The solicitation is not available in hard copy; all information must be accessed electronically through the provided SAM.gov link, and no technical specifications, plans, or drawings are provided to offerors. The procurement falls under NAICS code 333611 and is managed by DLA Aviation under the Department of Defense, with inquiries directed to the designated point of contact via email. The solicitation was posted on August 6, 2026, and responses are due by August 14, 2026.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
Federal
28--FILTER SYSTEM,AUXIL
Solicitation # SPE4A626Q0563
The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 15 units of the auxiliary filter system with NSN 2835015360539 under solicitation SPE4A626Q0563, which is a Small Business Set Aside for total award. The requirement is to deliver the items to DLA Distribution Cherry Point with a delivery deadline of 207 days after award, and only approved sources, identified as 0GCA0 104002-101 and 78286 70070-30316-011, are eligible. The solicitation is issued as an RFQ with no hard copies available; all submissions must be electronic and received by the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and all responsible sources may respond provided their quotes are submitted on time. The NAICS code is 333611, and the point of contact for questions is listed as DibbsBSM@dla.mil, with additional information accessible via the SAM.gov link provided. The office managing this procurement is located in Richmond, Virginia.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 333611
New
DIBBS
Industrial Fluid Cooler SupplyThe contract calls for the procurement and delivery of one industrial fluid cooler identified by NSN 4420-01-374-7946 and part number 250400G1, which must be supplied by either Curtiss-Wright or Siemens Energy. The item is required to be new, unused, and fully compliant with all defense logistics standards, ensuring it meets the stringent performance and quality expectations of military applications. The scope is strictly limited to this single unit, with no alternatives or substitutions permitted unless explicitly authorized under the technical specifications. This is a total small business set-aside subcontract under NAICS code 333611, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be fulfilled at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense through the DDSP New Cumberland Facility. Bidders must ensure full alignment with federal contracting rules and defense logistics requirements, and all deliveries must satisfy the specified technical and compliance criteria without deviation.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details