BLANKET, BED
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Blankets covered by this contract are designed for disaster relief use in institutional settings, prioritizing warmth, comfort, and durability. They must be made from either 100% acrylic or a blend of 30% plus or minus 5% wool and 70% plus or minus 5% man-made fiber such as acetate, and must be napped to ensure a soft, warm feel. The blanket must measure at least 66 inches wide by 90 inches long and weigh no less than 2.5 pounds. All edges lacking a selvedge require a quarter-inch over-edge stitched hem with at least ten stitches per inch, using cotton, cotton-blended, or synthetic thread, with ends secured to prevent unraveling. Color must be chosen to resist showing dirt or stains. The contractor is encouraged to use recovered materials in line with Public Law 94-580 where practicable. Each blanket must be labeled with the designation “BLANKET, DISASTER,” along with precise percentages of acrylic, wool, and non-acrylic content, the contractor’s name, contract number, NSN 7210-00-119-5335, and the statement “THIS BLANKET CONTAINS NO DDT. DO NOT DRY CLEAN OR LAUNDER.” Finished blankets must be single-piece, clean, free of loose threads, lint, or foreign matter, and inspected for commercial defects. Inspection procedures follow specification SPE1C1-26-R-0113, and the contract is a total small business set-aside under the Department of Defense, with responses due by August 24, 2026.
General Info
Agency
NAICS
Place of Performance
USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
REQUIREMENTS
DESCRIPTION THIS ITEM COVERS BLANKETS INTENDED
FOR USE IN OR BY INSTITUTIONS FOR DISASTER RELIEF
PURPOSE WHERE WARMTH AND COMFORT ARE DESIRABLE
CHARACTERISTICS. THE BLANKET CAN BE ANY COLOR
THAT DOES NOT SHOW DIRT OR STAINS WELL
AND SHALL BE MADE FROM 100% ACRYLIC OR 30%
(PLUS OR MINUS 5%) WOOL AND THE REMAINDER 70%
(PLUS OR MINUS 5%) MAN-MADE FIBER, ACETATE FIBER,
WOVEN OR NON-WOVEN MUST BE NAPPED IN ORDER TO
PROVIDE A WARM, COMFORT SOFT-FEEL. THE BLANKET
SHALL MEASURE NOT LESS THAN 66 INCHES WIDE AND 90
INCHES LONG AND WEIGH NOT LESS THAN 2.5 POUNDS
(TOTAL WEIGHT PER BLANKET). ALL EDGES OF THE
BLANKET THAT DO NOT HAVE A SELVEDGE SHALL BE
FINISHED WITH A 1/4(+/-1/16) INCH OVER-EDGE STITCHED
HEM WITH NOT LESS THAN 10 STITCHES PER INCH.
EITHER COTTON, COTTONBLENDED OR SYNTHETIC
THREAD MAY BE USED FOR ALL STITCHING. THE ENDS
OF THE OVER-EDGE STITCHING MUST NOT UNRAVEL.
REGULATORY REQUIREMENTS THE CONTRACTOR IS
ENCOURAGED TO USED RECOVERED MATERIAL IN
ACCORDANCE WITH PUBLIC LAW
94-580 TO THE MAXIMUM EXTENT PRACTICABLE.
LABEL EACH BLANKET MUST BE LABELED IN
ACCORDANCE WITH APPLICABLE RULES AND
REGULATION UNDER THE TEXTILE FIBER PRODUCT
ACT, WOOL PRODUCTS LABELING ACT AND CARE
LABEL ACT. THE LABEL MUST CONTAIN THE
FOLLOWING: BLANKET, DISASTER, (ACRYLIC
CONTENT, WOOL CONTENT, NON-ACRYLIC CONTENT,
EXPRESSED AS PERCENTAGES)CONTRACTOR'S NAME,
CONTRACT NUMBER, NATIONAL STOCK NUMBER (NSN)
AND THE FOLLOWING STATEMENT: "THIS BLANKET
CONTAINS NO DDT. DO NOT DRY CLEAN OR
LAUNDER". SEE EXAMPLE.
WORKMANSHIP AFTER COMPLETION, THE FINISHED
BLANKET SHALL NOT BE COMPOSED OF MORE THAN
ONE PIECE, SHALL BE CLEAN, AND ALL LOOSE THREAD,
LINT, AND FOREIGN MATTER REMOVED. THE
FINISHED BLANKET SHALL BE EXAMINED FOR
COMMERCIAL DEFECTS LISTED BELOW.
EXAMINATION BLANKET LOTS SHALL BE
INSPECTED IN ACCORDANCE WITH "SAMPLING
SPE1C1-26-R-0113 NSN/Part Number: 7210-00-119-5335
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency