Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on May 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

BLANKET, COOLING, HYP

Awarded
SPE2DH-26-T-3577Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The blanket is a cooling device designed for hyperthermia treatment, constructed from polar skin mini-mesh saturated in Arcticaqua, which activates upon elevated body temperature to promote evaporative cooling. It measures 36 inches wide by 30 inches long and weighs 0.6 pounds, individually packaged in a rugged foil pouch that prevents air and moisture transfer, with package dimensions of 4.5 inches by 7.75 inches by 0.5 inches. Each unit is sold individually and must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Packaging requires each unit to be sealed in a container that protects against damage and shipped in commercial exterior containers suitable for safe delivery by common carriers at the lowest cost to the specified delivery point at Fort Bliss, Texas. The item has a non-extendable shelf life of 60 months, with no more than nine months allowed to have passed from manufacture to government delivery. It is classified as a TYPE I (CODE S) item under RS023 and subject to DLA packaging requirements RP001 and technical/quality standards referenced under RA001 via the DLA Master List. The solicitation number is SPE2DH-26-T-3577, with a quantity of 100 units required, a delivery deadline of five days after award, and a response deadline of May 11, 2026, under a federal procurement managed by the Department of Defense’s Medical Supply Chain FSH.

General Info

Procurement of 100 packaged cooling blankets for hyperthermia, delivered within nine months, Fort Bliss.

Contract Value

$2,358

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

BLDG 2527 CHAFFEE ROAD, FORT BLISS, TX, 79916-2527, USA

Set-Aside

NONE

Award Issued Date

Documents

1

SPE2DH-26-T-3577.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA

Full Description

Show more
BLANKET,COOLING,HYP
BLANKET, COOLING, HYPERTHERMIA
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO contact@example.gov. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
CONSTRUCTED FROM POLAR SKIN MINI-MESH; SATURATED IN ARCTICAQUA; REACTS TO AN ELEVATED BODY TEMPERATURE TO PROMOTE EVAPORATIVE COOLING; 36 INCHES WIDE BY 30 INCHES LONG; WEIGHT: 0.6 LB .. PACKAGED IN A RUGGED, DURABLE FOIL POUCH THAT PREVENTS AIR OR MOISTURE TRANSFER. PACKAGE DIMENSIONS: 4.5 INCHES LONG BY 7.75 INCHES WIDE BY 0.5 INCHES HIGH .. UNIT OF ISSUE: EACH (EA) .. RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
SHALL HAVE A NON-EXTENDABLE SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO
DATE OF DELIVERY TO THE GOVERNMENT.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SPE2DH-26-T-3577
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6532-01-653-6054 Quantity: 100 EA Purchase Request: 7016584466QTY: 100 Delivery: 5 days ADO

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROS
Solicitation # SPE2DH-27-T-0287
Solicitation SPE2DH-27-T-0287 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscopy mounting medium, identified by NSN 6640-00-935-1485. The required material is a synthetic resin with a 60 percent solution of toluene or xylene, featuring a 1.52 refractive index when dry and a one-hour setting time. The unit of issue is a one-ounce bottle, which must have a shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery. Delivery is required within 69 days after order, with the destination specified as the USA Med Materiel Ctr Kore. The contractor must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129, and MIL-STD-2073-1E. Labels must include the NSN, manufacturer and CAGE code, contract or lot number, and relevant dates of manufacture or expiration. Because the material is hazardous, the contractor must comply with 49 CFR, 29 CFR, and the Hazard Communication Standard, providing a signed certification of package configuration on the DD Form 250. Additionally, the contract incorporates cybersecurity requirements via DFARS 252.204-7012 and requires the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit their quotations by November 3, 2026, and provide a complete data package if proposing alternate parts.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS