Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Block and Tackle Supply and Delivery

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, packaging, and delivery of 15 units of Block and Tackle identified by NSN 3940-01-429-8206, to be delivered to DLA Distribution in New Cumberland, Pennsylvania, adhering strictly to military standards for packaging, marking, and inspection. All work must comply with defense specifications to ensure operational readiness and logistical compatibility within military supply chains. The item is classified under NAICS code 332618, indicating it falls within the custom die stamping and industrial machinery manufacturing sector. The contract is structured as a subcontract with a response deadline of July 31, 2026, and was posted on July 20, 2026, leaving a short window for qualified vendors to submit proposals. Delivery must be completed in full compliance with the requirements outlined for military-grade handling and documentation, and the performance location is explicitly tied to the DLA facility in New Cumberland, with no deviations permitted in location or delivery protocols.

General Info

Manufacture and deliver 15 military-grade Block and Tackle units to DLA New Cumberland by July 31, 2026, per strict defense specs.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, packaging, and delivery of 15 units of Block and Tackle (NSN: 3940-01-429-8206) to DLA Distribution in New Cumberland, PA, under military standards for packaging, marking, and inspection.

Similar Contracts

Same NAICS industry code

Precision Spring Manufacturing – Helical Compression SpringsThe contract requires the manufacture, testing, packaging, and delivery of helical compression springs adhering strictly to DLA technical standards, ensuring full compliance with origin inspection protocols, configuration control measures, and approved packaging requirements. All work must be executed to meet the precise engineering and quality benchmarks mandated by the Department of Defense, with emphasis on consistency, traceability, and reliability throughout the production lifecycle. Performance of the contract is designated for Greensboro, North Carolina, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 332618 for other spring manufacturing. This is classified as a subcontract, and while no set-aside type is specified, the procurement is administered by the Land Supply Chain under the Department of Defense, emphasizing its critical role in defense logistics and supply chain readiness.

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Straight-Headed Pins (NSN: 5315016057397)The contract calls for the manufacture, quality assurance, packaging, and delivery of 89 straight-headed pins designated by NSN 5315016057397, following strict military specifications NASM20392 Rev 01 and NASM5673 Rev 1, with full compliance to the DLA Master List, MIL-STD-129 for labeling and packaging, and ASTM D3951 for commercial packaging standards. All work must adhere to the required technical and procedural benchmarks to ensure interoperability and reliability within defense systems, and the product must be delivered to the specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a small business set-aside subcontract under the SBA program, categorized under NAICS code 332618, reserved exclusively for small businesses as defined by the FAR 19.5 regulations. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All submissions must be made through the designated DIBBS platform, and suppliers are expected to demonstrate not only technical capability but also full compliance with federal contracting requirements for small business participation.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

BLOCK AND TACKLEThis contract pertains to the procurement of 15 units of a Block and Tackle item identified by NSN 3940-01-429-8206 and part number 12365945, under solicitation SPE8EE-26-T-2126, with a required delivery date of July 9, 2026, and a delivery window of 163 days from award. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and transportation is governed by DLAD procedural notes C19 and C20. The contract enforces stringent quality and cybersecurity requirements: sampling and acceptance criteria mandate zero non-conformances under MIL-STD-1916 or a comparable zero-based plan unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively; unclassified attributes are treated as major. Technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the item is classified as a critical application. The purchasing request number is 7017444038, and the point of contact for inquiries is Philip Ferrara of the Department of Defense, with full solicitation details available through the DIBBS system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 24 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of a single straight-headed pin with part number 901-236-625-275 and NSN 5315-01-649-4032, quantity of one unit, to be delivered within five days under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods and marking requirements, with no special marking needed. The item is designated as a critical application item for The Boeing Company and is subject to non-tailored quality requirements under ISO 9001:2015, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Technical and quality requirements referenced by R or I numbers are incorporated by authority of the DLA Master List, and the revision in effect at the solicitation or award date controls depending on acquisition size. Unit of issue is each, and the delivery destination is CAMP LEMONNIER, DJIBOUTI, under a joint task force contract with transportation governed by DLAD procedure notes. Item unique identification is not required per customer request, and all documentation must align with DLA packaging standards and government-specific identification protocols. The contract was posted on July 20, 2026, with a response deadline of July 28, 2026, under solicitation SPE4A0-26-T-3952, managed by the Department of Defense’s Aviation Supply Chain ESOB.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 24 hours ago

DEADLINE

PIN, GROOVED, HEADEDThe contract solicitation SPE4A6-26-T-00QM calls for the procurement of two grooved headed pins with the NSN 5315-01-517-8894, to be delivered within ten days of award to a military installation in Drawsko Pomorskie, Poland. The item is classified as a critical component requiring source inspection, with acceptance governed by inspection at origin under RQ009 and RQ011, meaning the contractor must demonstrate conformance prior to shipment and the government retains final acceptance authority at that point. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with specific sampling mandates requiring compliance with MIL-STD-1916 or ASQ H1331 Table 1, zero non-conformances in sample lots under MIL-STD-105/ASQ Z1.4, and designated verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The contractor must maintain a tailored ISO 9001:2008 quality management system excluding clause 7.3 or an equivalent such as SAE AS9003, ensuring robust manufacturing controls. Packaging must conform to MIL-STD-2073-1E and RP001, with preservation method 10 and dry climate storage, while labeling and marking must adhere to MIL-STD-129 including barcoding and RDF 555 designation. Transportation must use the fastest traceable means excluding parcel post. Export-controlled technical data associated with this item is subject to ITAR or EAR, requiring compliance with DFARS 252.225-7048, restricting access to contractors with approved US/Canada Joint Certification Program status, completed export control training, and formal DLA authorization. The solicitation mandates electronic invoicing through WAWF and adherence to a suite of federal and defense acquisition regulations, including cybersecurity safeguards under DFARS 252.204-7012, hazardous materials compliance under 29 CFR 1910.1200, and prohibitions on certain foreign-sourced telecommunications equipment. Offerors must possess a Unique Entity ID and CAGE code, represent their small business status if applicable, and disclose supplier information if providing covered defense telecommunications equipment. Pricing is not disclosed in the solicitation, and award will be based on compliance with technical, quality,

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

PIN, STRAIGHT, HEADLEThe contract specifies the procurement of 31 units of a straight, headless pin identified by NSN 5315-01-555-1099 and part number MS20253-4-550, manufactured in accordance with Drawing NR 81205 AS20253 Revision 1 dated 05/30/2001. Delivery is due in 113 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the manufacturer’s location. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; critical attributes require Verification Level VII or AQL 0.1, major attributes Level IV or AQL 1.0, and minor attributes Level II or AQL 4.0. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and all marking and labeling must adhere to physical identification standards RQ017. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies per RQ011. The delivery destination is DLA Distribution San Joaquin in Tracy, CA, with a required ship date of November 19, 2026, and the original delivery date was October 14, 2026. The contract is issued under solicitation SPE4A6-26-T-07WY, with unit of issue in each, and all terms override any conflicting standards unless explicitly amended.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

ROPE, WIREThis contract solicits 45 units of rope, wire under NSN 4010-01-369-6685 with a total requirement of 45 each, subject to a zero variance in quantity. Delivery is required within 167 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging codes and methods for preservation and containment. Government-issued identification must be removed from non-accepted supplies, and no Class I ozone-depleting chemicals may be used in any component or process, with any substitutions requiring prior approval. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-defect sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with zero non-conformances required unless otherwise stated in the contract. The contract is a total small business set-aside under NAICS code 332618, with a response deadline of July 23, 2026, and is issued by the Department of Defense’s Combat Vehicles and Armament office. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The designated delivery point and freight shipping address is the DLA Distribution facility in New Cumberland, PA.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 24 hours ago

DEADLINE

O-RINGOfferors responding to solicitation SPE7L1-26-T-856G for O-RING NSN 5331-00-242-0516 must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the threshold now set at $150,000, and must disclose any non-domestic materials used. The use of additive manufacturing for any part is prohibited unless explicitly approved by the contracting officer, and offers containing such items will be deemed ineligible for award. Fast Pay is not applicable, and bidders are strongly urged to quote quantity ranges to accommodate fluctuating demand and avoid administrative delays, though this does not apply to Auto IDC. Offerors must also certify that they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for designated categories under FAR provisions 52.212-3 and 52.219-1. All contractors must prepare for mandatory access to the Vendor Shipment Module through DLA’s new Account Management & Provisioning System, with web service users required to update their schema by the specified deadline to maintain shipping capability. Failure to register via AMPS will prevent shipment to DLA. Offerors unable to submit a bid by the closing date must still register a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. The delivery deadline is 175 days after award, with a response deadline of July 31, 2026, and inquiries should be directed to Kristie Fown at DLA.

LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

ROPE, WIREThe contract specifies the procurement of one unit of rope, wire with NSN 4010-01-732-4216, valued at $815.00, under solicitation SPE4A5-26-T-295W, with delivery required within 20 days after award, by July 14, 2026, to be shipped FOB origin to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584. All items must be packaged in accordance with ASTM D3951, but DLA Master List of Technical and Quality Requirements supersede any conflicting requirements, and packaging must be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack clearly indicated. Palletization must conform to RP001 DLA Packaging Requirements for Procurement. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required in the sample lot unless otherwise specified; attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs, and manufacturers may choose attribute or variable inspection methods. Physical identification of bare items must comply with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at origin, and the contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The item is designated as a critical application requiring CMMC Level 2 cybersecurity self-assessment, with safeguarding of covered defense information governed by 252.204-7008 and NIST SP 800-171 DOD assessment requirements. Transportation must be traceable, and parcel post is prohibited. Contractors must comply with hazardous material labeling under 29 CFR 1910.1200 and prohibition of hexavalent chromium per 252.223-7008, and adhere to employment equity, anti-trafficking, and eligibility verification clauses. Invoices must be submitted via WAWF. The contractor must represent its size and socioeconomic status, including UEI

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

CHAIN, WELDLESSThis contract specifies the procurement of 90 units of a weldless chain made from corrosion-resistant steel, with a stock thickness of 0.035 inch, measuring 8 inches in length and classified as Type 2 Class 3 Size 35, identified by part number NAS1455C35-8 and NSN 4010-00-142-6300. The chain meets the requirements of NAS1455 Revision 2 dated 09/19/2014 and references RR-C-271H(1) Revision 1 dated 01/03/2022, and is designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include mandatory packaging, marking, and inspection protocols per MIL-STD-129, ASTM D3951, and DLA-specific provisions RP001, RQ011, RQ017, and RQ001. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified; inspection and acceptance occur at origin, and item unique identification is not required per the service customer’s request. The chain must be delivered FOB origin within 145 days, with an original required delivery date of September 12, 2026, and a need ship date of September 15, 2026. No quantity variance is permitted; the contract mandates exact compliance with the 90-unit order. Packaging must adhere to DLA requirements, including palletization per RP001 and labeling per MIL-STD-129, with unit of issue as EA. Measuring and test equipment must be calibrated and traceable per RT001. Deliveries are to be shipped to DLA Distribution Jacksonville at the specified address, with transportation governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE4A5-26-T-070W, with a response deadline of July 23, 2026, and is administered by the Department of Defense, ASC Supplier Operations OEM Division, with Hien-Van Trinh as the primary point of contact.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

PIN, QUICK RELEASEThis contract is for the procurement of 365 units of a PIN, QUICK RELEASE with NSN 5315-01-386-0206 under solicitation SPE4A5-26-T-296G, issued as a Total Small Business Set-Aside under NAICS code 332618. Delivery is required within 300 days after delivery order issuance, and the solicitation response deadline is July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Compliance with MIL-STD-1916 or ASQ H1331 zero-based sampling plans is mandated, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Inspection may use attribute or variable methods at the manufacturer’s option unless otherwise directed. The item involves export-controlled technical data subject to ITAR or EAR regulations, requiring prior government authorization for any disclosure to foreign persons, including U.S. subsidiaries and foreign nationals domestically. Access to this data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Physical marking of the item is required per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Cybersecurity compliance at CMMC Level 2 by a certified third-party assessment organization is mandatory. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary contact information provided for Gregory White.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Small Business Subcontracting and Socioeconomic ComplianceThe contract requires comprehensive support for a prime contractor’s small business subcontracting plan, ensuring strict adherence to Federal Acquisition Regulation clauses related to socioeconomic programs. This includes verifying the eligibility status of subcontractors as Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, and HUBZone firms, with a focus on accurate documentation and ongoing compliance. The effort is designed to enable the prime contractor to meet federal small business subcontracting goals and maintain regulatory integrity throughout the performance period. Performance is centered at Holloman Air Force Base with a zip code of 88330-7706, and the work falls under NAICS code 541611, which pertains to management consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a narrow window for proposal submission. The contracting agency is the Department of Defense under the organization name Construction & Equipment Manu & Con, and the contract type is classified as a subcontract, emphasizing the supporting nature of the services provided to a larger prime contractor fulfilling federal obligations.

Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

Specialized Freight and Defense Supply Chain LogisticsThe contract involves the specialized transportation of defense supplies under FOB Origin terms, requiring timely delivery within 20 days of award and seamless integration with the Defense Logistics Agency’s logistics and tracking systems. All shipments must comply with DLA’s standardized processes for visibility, accountability, and real-time monitoring throughout the supply chain, ensuring full traceability from origin to final destination at Holloman Air Force Base, with a ZIP code of 88330-7706. The work is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation of freight, and is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the performance location is confirmed at Holloman AFB. While no specific point of contact or set-aside details are provided, contractors must be prepared to meet stringent defense logistics requirements and demonstrate proven capability in handling sensitive defense cargo under FOB Origin conditions. All parties must ensure full alignment with DLA’s digital tracking infrastructure to maintain operational readiness and compliance with military supply chain protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Cybersecurity Compliance and CMMC ImplementationThe contract entails the implementation and ongoing maintenance of cybersecurity controls to achieve CMMC Level 2 compliance for systems that handle covered defense information. This subcontract requires the contractor to establish, document, and operationalize a robust cybersecurity framework aligned with the Cybersecurity Maturity Model Certification standards, ensuring that all technical and administrative safeguards are properly integrated into the defense information environment. The work must be performed at Holloman Air Force Base, with a focus on securing networks, devices, and data against potential threats while maintaining continuous compliance throughout the contract duration. All activities under this agreement must adhere to the North American Industry Classification System code 541512, indicating that the services fall under computer systems design and related activities. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense, specifically by the Construction & Equipment Manu & Con organization. The contract is not designated for any specific type of set-aside, and the place of performance is fixed at the specified zip code in New Mexico, requiring the contractor to meet all regulatory, technical, and reporting obligations in alignment with federal defense cybersecurity mandates.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE

Hazardous Materials Packaging and LabelingThe contract involves specialized packaging and labeling of defense supplies that contain hazardous materials, requiring strict adherence to safety and regulatory standards. This includes the preparation of Material Safety Data Sheets and full compliance with hazard warning requirements to ensure safe handling, storage, and transportation throughout the defense supply chain. The work must be performed in accordance with federal guidelines for hazardous material management and is classified as a subcontract under NAICS code 561910, which pertains to other support services for waste management. The opportunity was posted on July 20, 2026, with a response deadline of July 31, 2026, and the place of performance is designated at Holloman Air Force Base with the ZIP code 88330-7706. The contracting agency is the Department of Defense under the organization title Construction & Equipment Manu & Con, and all activities must support defense-specific operational needs. While no point of contact information is provided, interested parties can access additional details through the official DIBBS portal using the provided RFQ link.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Defense Ammunition Component ManufacturingThe contract mandates the manufacture of CROSSHEAD and AMMONITION TRAILER components to stringent military specifications, requiring full adherence to ASTM standards for material and process integrity as well as DLA packaging guidelines to ensure safe handling and transport. Comprehensive supply chain traceability is mandatory throughout production, demanding documented provenance of all raw materials, subcomponents, and assembly processes to meet defense-grade accountability requirements. Production must be executed with precision to ensure compatibility, durability, and operational reliability under austere military conditions. The work is classified as a subcontract under NAICS code 332999, with performance required at Holloman Air Force Base, zip 88330-7706, and the response deadline for submissions is July 31, 2026. The contract is issued by the Department of Defense through the organization titled CONSTRUCTION & EQUIPMENT MANU & CON, and while no specific solicitation number or point of contact is listed, all bids must be submitted via the provided DIBBS portal link to be considered. Failure to comply with specified standards or traceability protocols will result in immediate rejection, regardless of price or timeline.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to insufficient access to prime contract details, as a configuration error preventing data retrieval persists with the FOUNDRY_API_URL unset. The solicitation, titled Unable to Identify Subcontract Opportunities, was posted on July 20, 2026, with a response deadline of July 31, 2026, and is categorized under subcontract type with no set-aside information provided. The agency is listed as the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON, with the place of performance located in San Diego, California, 92136-3581. No NAICS code, organization type, or point of contact details are available, and the contract cannot be further analyzed without resolving the system configuration issue. The official reference link is provided for potential follow-up.

POSTED

about 24 hours ago

DEADLINE

Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for all hazardous materials included in the winch unit, ensuring full compliance with OSHA and Defense Logistics Agency standards. This work is critical to meeting federal safety and communication requirements for handling, storing, and transporting dangerous substances associated with the equipment. All documentation must be accurate, up to date, and aligned with current regulatory frameworks to support safe operations across the defense supply chain. The contract is a subcontract under the NAICS code 541690, issued by the Department of Defense through the Construction & Equipment Manu & Con agency, with performance centered in Gary, Indiana, zip code 46402-3021. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026. While no set-aside designation is specified, the work is tied to DLA compliance obligations, demanding strict adherence to federal hazardous material communication protocols. The successful contractor must demonstrate expertise in regulatory documentation and safety labeling for defense-related machinery.

Other Scientific and Technical Consulting Services

POSTED

about 24 hours ago

DEADLINE

Transportation and Delivery Logistics (FOB Origin)The contract governs the FOB-origin transportation of a winch unit from the supplier’s location to Gary, Indiana, requiring freight-based, non-parcel shipping with full shipment visibility throughout transit. All responsibilities for loading, documentation, and initial freight movement rest with the supplier, with risk and title transferring to the buyer upon delivery to the carrier at origin. The shipment must be traceable at every stage, ensuring real-time tracking and accountability from pickup to final destination in Gary, IN, with a zip code of 46402-3021. This is a subcontract under NAICS code 484220, awarded by the Department of Defense under the Construction & Equipment Manu & Con organization, with bids due by July 31, 2026, and the solicitation posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 24 hours ago

DEADLINE

Packaging, Palletization, and Preservation ServicesThe contract requires comprehensive packaging, palletization, and preservation services for a winch unit, adhering strictly to Military-compliant standards ASTM D3951 and DLA RP001. All work must ensure the unit is protected against environmental damage during storage and transit, with specific attention to moisture control, proper labeling, and secure palletization. The services must be executed to maintain readiness and functionality under demanding operational conditions, with full compliance to Department of Defense specifications for defense-related equipment. The contract is classified as a subcontract under NAICS code 561910, issued by the Department of Defense under the organization name CONSTRUCTION & EQUIPMENT MANU & CON. Performance is designated for Gary, Indiana, with a zip code of 46402-3021. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026. Interested parties must submit proposals through the DIBBS platform using the reference number SPE8EE26T2123. No set-aside type has been designated, indicating open competition among qualified vendors.

Packaging and Labeling Services

POSTED

about 24 hours ago

DEADLINE

Power-Operated Drum Winch SupplyThe contract seeks the manufacture and delivery of one power-operated drum winch unit that must fully comply with Department of Defense technical standards, ensuring it meets the rigorous performance, durability, and safety requirements for military applications. The unit must be packaged and labeled in strict accordance with applicable military specifications to ensure proper handling, storage, and field readiness. This is a subcontract under the NAICS code 333999, indicating it falls under other miscellaneous manufacturing, and the performance location is designated as Gary, Indiana, with a ZIP code of 46402-3021. The solicitation was posted on July 20, 2026, with responses required by July 31, 2026, both at 5:00 PM Eastern Time. The procuring agency is the Department of Defense under the Construction & Equipment Manu & Con organization, and the contract is accessible via the DIBBS portal for qualified subcontractors to review details and submit proposals.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 24 hours ago

DEADLINE

Data Retrieval UnavailableThe solicitation titled Data Retrieval Unavailable was posted on July 20, 2026, with a response deadline of July 23, 2026, and is categorized as a subcontract under a Women-Owned Small Business Set-Aside. The North American Industry Classification System code is listed as 999999, indicating an unspecified or incomplete classification. The contracting agency is the Department of Defense under the organization Construction & Equipment Manu & Con, with the place of performance located in New Orleans, Louisiana, with a ZIP code of 70143-5000. No specific point of contact information is provided, and system limitations prevent the identification of any subcontract opportunities due to a failure in retrieving prime contract data. The official link for the solicitation is accessible through the DIBBS portal, but no details regarding scope, requirements, or award criteria are available within the provided dataset.

POSTED

about 24 hours ago

DEADLINE

Cybersecurity and CMMC Compliance SupportThe contract requires support for achieving Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance and adherence to NIST SP 800-171 standards to protect covered defense information as mandated by DFARS 252.204-7012. This effort involves conducting a comprehensive self-assessment to evaluate current cybersecurity practices, identifying gaps in safeguarding controlled unclassified information, and implementing necessary controls to meet federal requirements for defense contractors. The scope includes documentation, policy development, employee training, and system hardening aligned with the CMMC framework to ensure readiness for third-party assessment. This is a subcontract under the Department of Defense with a NAICS code of 541512, indicating information technology services focused on cybersecurity consulting and implementation. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is being managed through the DIBBS platform. The place of performance details are not specified, but the work must be performed in a manner that supports the defense supply chain’s cybersecurity posture. The successful contractor will be expected to deliver a fully documented compliance program that can withstand audit and verification processes under the CMMC framework.

Computer Systems Design Services

POSTED

about 24 hours ago

DEADLINE