Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Block Wall Improvement Project

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Inglewood has issued a notice of exemption for the Block Wall Improvement Project, which involves removing existing chain link fencing and installing approximately 55 linear feet of an eight-foot high reinforced concrete masonry unit wall. This project is intended to enhance physical security and property boundaries without requiring a full environmental review under the California Environmental Quality Act. The work is scheduled to take place within the city limits of Inglewood, specifically in the 90301 zip code area. Arturo Salazar, Senior Planner, serves as the primary point of contact for inquiries and can be reached via phone at 310-412-5230 or email at asalazar1@cityofinglewood.org. The notice was posted on September 24, 2025, and further details are available through the California Environmental Quality Act online portal.

General Info

Inglewood to install 55 linear feet of 8-foot concrete wall to enhance security, exempt from environmental review.

Agency

California → City of Inglewood

NAICS

238140 - Masonry ContractorsView NAICS

Place of Performance

Inglewood, CA, 90301

Set-Aside

NONE

Documents

(1)

NOE-Blockwall Improvment Project

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Inglewood
Contacts1 person available
OfficeN/A
Organization / Agency
California → City of Inglewood
Office AddressN/A
Contacts
Arturo SalazarSenior Planner

Full Description

Show more
Notice of Exemption to allow the removal of existing chain link fencing and replacing it with approximately 55 linear feet of eight-foot high reinforced concrete masonry unit (CMU) wall.

Similar Contracts

Same NAICS industry code

NAICS: 238140
New
SLED
2027-05 Repoint Brick Facades - 4 Locations - Town of Fairfield
Solicitation # 38285
The Town of Fairfield, acting through its Department of Public Works, is seeking qualified contractors to perform repointing work on brick facades at four locations, involving the removal of 15 to 20 millimeters of deteriorated mortar and its replacement with a fresh, lime-based mix to achieve an oatmeal consistency and proper structural restoration. The work must be completed with precision to ensure durability and historical integrity, using materials and techniques appropriate for masonry preservation. Bids must be submitted by the deadline of August 14, 2026, at 3:00 PM, with the solicitation number 38285, and all related information is accessible via the official bid portal. This is a competitive solicitation posted exclusively for notification purposes, and no questions submitted through public channels will be answered; interested parties must review the full documentation on the designated website to understand requirements, specifications, and submission protocols. The project falls under the jurisdiction of the Connecticut state procurement system, with Pru O’Brien serving as the primary point of contact for administrative inquiries. All work must be performed at the designated locations within Connecticut, and contractors are expected to comply with all applicable standards for historic masonry restoration without reliance on external guidance from the posting platform.
DAS Procurement

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 238140
New
Federal
Area 43/270 Perimeter Wall and Gate Replacement
Solicitation # PR16067746
The project involves the complete demolition and reconstruction of the perimeter boundary wall at Area 43/270, accompanied by a range of site upgrades to enhance security and durability. Work initiates with the installation of a temporary iron-sheet fence topped with razor wire to secure the site, followed by removal of the existing wall, clearing of vegetation and roots, and debris disposal. Construction proceeds with excavation to 900mm depth, concrete blinding, and installation of reinforced strip footings, structural columns, and horizontal beams at mid-height and top levels. The wall structure consists of 200mm reinforced hollow blockwork with integrated vertical and horizontal reinforcement, finished with plaster, roughcast, silicone primer, and weatherproof paint, while foundation walls receive bituminous coating for moisture protection. New razor wire is installed along the entire perimeter, including the main gate, which is a custom-fabricated 3.50m x 2.75m sliding vehicle gate with a built-in pedestrian door, heavy-duty hardware, peep hole, and concertina wire, all fabricated to ASTM standards. Additional improvements include brick-lined perimeter drainage with catch pits and uPVC piping, repairs to the guard house covering roof, door relocation, electrical upgrades, and drainage enhancements, restoration of the screen wall, and installation of security lighting at the gate area. Final phases involve comprehensive site cleanup, landscape restoration, utility repairs, and repainting of affected surfaces. All work must strictly adhere to material specifications, testing protocols, and safety regulations including EM 385-1-1, BS, and ASTM codes, with COR oversight ensuring compliance in compaction, concrete quality, and reinforcement installation. The solicitation is issued by the US Embassy Lilongwe under the NAICS code 238140, with responses due by August 17, 2026, and performance location in Lilongwe.
US Embassy Lilongwe

POSTED

4 days ago

DEADLINE

in 15 days
View Details