Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BLOWER, AIR BARRIER

Active
SPE8E7-26-T-3478Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of nine units of a Blower, Air Barrier with NSN 4140-01-414-0670 and part number WA0802 from EURAMCO SAFETY INC, under solicitation SPE8E7-26-T-3478. Delivery is required within 138 days of award, with FOB origin terms and zero variance allowed in quantity, meaning exactly nine units must be supplied. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, using specified methods including PRES MTHD:10 and unit container D3, with no plastic wrapping, cushioning, or dunnage preferred whenever contractually permissible. Marking follows MIL-STD-129 with no special marking codes applied. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must adhere to DLA procedural notes C19 and C20 for transportation and first destination handling. The required ship date is January 3, 2027, with an original delivery deadline of January 7, 2027. This is a critical application item, and the contract incorporates technical and quality requirements referenced in the DLA Master List, with compliance determined by the applicable revision as of the solicitation or award date. The unit of issue is each (EA), priced at $9.00 per unit, totaling $81.00. All information aligns with the Department of Defense’s authorized systems and procurement protocols, and the point of contact for inquiries is Kelly Mitchell at DLA.

General Info

Nine air blower units at $9 each, delivered to New Cumberland by Jan 7, 2027, per MIL-STD and DLA protocols.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E7-26-T-3478 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLOWER,AIR BARRIER
BLOWER,AIR BARRIER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
EURAMCO SAFETY INC 52081 P/N WA0802
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757979 0001 EA 9.000
NSN/MATERIAL:4140014140670
DELIVERY (IN DAYS):0138
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
SPE8E7-26-T-3478
SECTION B
PR: 7017757979 PRLI: 0001 CONT’D
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
WHENEVER POSSIBLE AND PERMITTED BY THE
TERMS OF THE CONTRACT, AVOID THE USE OF
PLASTICS AS WRAPPING, CUSHIONING, OR
DUNNAGE MATERIALS.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/03/2027 Original Required Delivery Date:01/07/2027
SPE8E7-26-T-3478 NSN/Part Number: 4140-01-414-0670 Quantity: 9 EA Purchase Request: 7017757979QTY: 9 Delivery: 138 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333413
New
DIBBS
Tube Axial Fan Supply and ManufacturingThe contract entails the manufacture and supply of 82 tube axial fans specifically built to meet military technical drawings and specifications, ensuring full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129K for marking standards. The equipment must be produced and delivered in accordance with rigorous defense industry requirements, with all units destined for performance at Tinker Air Force Base, identified by the ZIP code 73145-8000. The solicitation falls under the NAICS code 333413, classifying it as part of the heating, ventilation, and air conditioning equipment manufacturing sector, and is structured as a subcontract opportunity under the Department of Defense’s Construction & Equipment MRO SVC I agency. The opportunity was posted on August 5, 2026, with a firm response deadline of August 17, 2026, requiring interested parties to submit proposals within this narrow window to be considered for award.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
Axial Fan Impeller SupplyThe contract calls for the supply of one precision axial fan impeller designated as part number 44-28-DL3 and national stock number 4140-01-348-8857, intended for use in defense or industrial ventilation systems. This is a subcontract issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 333413 indicating manufacturing of other commercial and service industry machinery. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. Performance of the contract is required at Fort Eustis, Virginia, with the specified zip code 23604-5577. No set-aside classification is listed, and the contract is not directed toward any specific small business category. The full details and submission portal are accessible through the DIBBS platform using the provided link.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
Snubber Assembly Supply and DeliveryThe contract requests the supply and delivery of 13 units of a Snubber Assembly identified by NSN 4460010261158 and part number LORD CORPORATION 76005 P/N J10883-1, manufactured in strict compliance with TDP Rev A Gen 1 specifications. This mechanical vibration-damping component is intended for use in defense or industrial systems requiring reliable shock and vibration control. All units must meet the defined technical and quality standards to ensure operational compatibility and performance under demanding conditions. The solicitation is structured as a subcontract under agency ID SPE8E826T4967, issued by the DDSP NEW CUMBERLAND FACILITY, part of the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with ZIP code 17070-5002. The request was posted on August 5, 2026, and responses are due by August 17, 2026. The North American Industry Classification System code 333413 indicates the work falls under the manufacturing of other commercial and service industry machinery. No set-aside preferences or specific point of contact details are provided, and the contract will be procured through the DIBBS system via the linked online portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3471
The contract involves the procurement of 14 centrifugal fans, identified by part number 0574300003M and NSN 4140011665049, with a total contract value of $196.00. Delivery is required within 167 days from award, with an original delivery target of December 23, 2026, and a need-ship date of February 1, 2027. Items must be shipped FOB origin, with title and risk of loss transferring to the government upon delivery to the carrier. The designated delivery location is the DLA District San Joaquin warehouse in Tracy, California. All packaging must comply with ASTM D3951 and take precedence from the DLA Master List of Technical and Quality Requirements, with palletization strictly following RP001. Marking and labeling must adhere to MIL-STD-129, including proper unit of issue and quantity per unit pack identification, and barcoding for supply chain visibility. The product must be free of intentionally added mercury or mercury-containing compounds, with exceptions limited to specific applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment barrier, per NAVSEA 5100-003D. Hazardous materials require labeling consistent with OSHA’s Hazard Communication Standard or applicable federal statutes, with pre-award submission of hazard warning labels for any unlisted materials. Compliance with NIST SP 800-171 is required for safeguarding covered defense information, and contractors must implement basic cybersecurity controls. The contract includes mandatory FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors. Invoicing must be submitted exclusively through Wide Area WorkFlow, and the contractor must ensure compliance with all applicable technical, quality, packaging, safety, and cybersecurity requirements outlined in the solicitation.
DLA DIST SAN JOAQUIN

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3506
The contract pertains to the procurement of 11 tube axial fans with NSN 4140016766052 and part number 77A126678P7, supplied by Lockheed Martin Corporation and Mercury Systems, Inc. The equipment must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all documentation must adhere to standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Items are to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination after a 167-day delivery window, with an original required delivery date of February 18, 2027, and a needed ship date of February 1, 2027. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation instructions follow DLAD Proc Notes C19 and C20. The contract is awarded under solicitation SPE8E7-26-T-3506 with a unit price of $11.00 per unit for a total of $121.00, classified under NAICS code 333413, and is administered by the Department of Defense through the DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E9-26-T-3317
The contract is for the procurement of 19 tube axial fans identified by NSN 4140-01-108-5796 and purchase request 7017758417, under solicitation SPE8E9-26-T-3317, with a unit price of $19.00 per unit and a total price of $361.00. Delivery is required within 167 days from the contract date, shipped FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while fully adhering to the more stringent DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements for Procurement, and all materials must be prepared without government identification if rejected. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, with the required ship date set for February 1, 2027, though the original delivery deadline was December 8, 2026. Transportation instructions reference DLAD Proc Notes C19 and C20, and the product falls under NAICS code 333413. The contracting activity is under the Department of Defense, with Matthew Kruc as the primary point of contact, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. This contract is subject to covered defense information provisions and the applicable revisions of the DLA Master List based on the solicitation issuance date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3475
This contract specifies the procurement of four tube axial fans identified by NSN 4140-01-300-4148 and part number 034399000 from Rotron Incorporated, with a unit price of $4.00 per unit and a total contract value of $16.00. Delivery is required within 124 days from the contract award, with shipment FOB origin, and the goods must arrive at the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates mandatory technical and quality standards from the DLA Master List of Technical and Quality Requirements, with compliance tied to the version effective on the solicitation issue date. All items must meet MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging, with marking per MIL-STD-129 and no special marking required. Packaging must avoid plastic wrapping, cushioning, or dunnage where possible, using specified methods and materials including dry preservation and Unit Container D3. The item is classified as a critical application item, and no mercury or mercury-containing compounds may be used in or come into direct contact with the hardware, except under limited exceptions specified by NAVSEA. Functional mercury in batteries, fluorescent lights, sensors, or chemical reagents is permitted only if the device includes a secondary containment barrier. The contract prohibits any quantity variance and requires inspection and acceptance at the destination, with a required delivery date of July 18, 2027, and a need ship date of December 20, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
BLOWER, AIR BARRIER
Solicitation # SPE8E7-26-T-3501
The contract solicits 26,000 units of a blower designed for air barrier applications under NSN 4140-01-677-6586, with a delivery deadline of 167 days after award. It is issued as a total small business set-aside under NAICS code 333413 by the Department of Defense through the DDSP New Cumberland Facility, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and the applicable revision is determined by the solicitation issue date. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise stated in the contract, and manufacturers may use either attribute or variable inspection methods under MIL-STD-1916. The solicitation requires complete data packages for both the approved and alternate parts, as no existing data is available. Responses are due by August 17, 2026, with the contract open through the DIBBS portal and managed by Kelly Mitchell as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3476
The contract pertains to the procurement of a single axial vane fan with NSN 4140-01-302-9011 under solicitation SPE8E7-26-T-3476, issued by the Department of Defense through the Puget Sound office. The delivery is required within 167 days of award, and responses must be submitted by August 17, 2026. This item may require casting or forging during manufacturing, and since the government lacks the necessary tooling, vendors must submit a Casting and Forging Assistance Request if additional support is needed. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or any subsequent amendment. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or supplies, except for specific exceptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable items containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. No approved technical data package is currently available for this NSN, and vendors are directed not to submit requests to the DLA Troop Support Technical Data team. The point of contact for inquiries is Kelly Mitchell, reachable via email and phone provided in the contract data.
PUGET SOUND

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E9-26-T-3333
The contract is for the procurement of 13 tube axial fans with NSN 4140-01-313-1048 and part number BTA10 from IMS ENGINEERED PRODUCTS LLC, under solicitation SPE8E9-26-T-3333. The unit price is $13.00 per unit, totaling $169.00, with delivery required within 167 days of contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with packaging mandated to comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while all DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow DLA Packaging Requirements for Procurement, and all packaging must be labeled per the specified Unit of Issue and Quantity per Unit Pack. Delivery is directed to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, and the shipment must be ready by February 1, 2027, though the original required delivery date was January 1, 2027. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 333413 for industrial machinery manufacturing. Covered Defense Information may apply, and no technical data package is currently approved by DLA Troop Support for this NSN. Transportation details are governed by DLAD Proc Notes C19 and C20, and the DoD unit of issue must be referenced against the official DLA unit of issue spreadsheet.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E9-26-T-3346
The contract pertains to the procurement of a single centrifugal fan identified by NSN 4140012897911 and associated part numbers from FM AF, LLC, with delivery required to DLA Distribution Puget Sound in Bremerton, WA, under FOB ORIGIN terms. The item is designated as a critical application component, subject to strict packaging and preservation standards per MIL-STD-2073-1E, requiring climate-controlled drying under cold/dry conditions without specified preservative, wrapping, or cushioning materials, and with a directive to avoid plastics where feasible. Marking must conform to MIL-STD-129 with no special marking required, and all shipments must be delivered to the designated location by the original required delivery date of November 8, 2027, with a need ship date of February 1, 2027, and a total delivery window of 167 days from the solicitation issue date. The contract value is $523,852.80 based on multiple CLINs, though item descriptions are not explicitly linked to pricing lines, and the quantity is one unit. Inspection and acceptance occur at the destination, with invoicing mandated through WAWF only. The contract incorporates numerous FAR and DFARS clauses, including cybersecurity safeguarding, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, and prohibitions on covered telecommunications equipment, with deviations applied to several. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via RC001 and RA001. The contractor must comply with specific hazardous material labeling per 29 CFR 1910.1200, submit Safety Data Sheets prior to award, and represent size and socioeconomic status, including UEI and CAGE codes if providing covered defense telecommunications equipment. The solicitation number is SPE8E9-26-T-3346, issued on August 5, 2026, with proposals due by August 17, 2026, through the DIBBS portal. The contracting office is under the Department of Defense’s Construction & Equipment MRO SVC I, and no evaluation factors are published in the available documentation.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 484220
New
DIBBS
Transportation and Delivery to Destination (FOB Destination)
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Documentation
Other Scientific and Technical Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Palletization, and Labeling Services
Other Warehousing and Storage

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Filter Element Supply and Manufacturing
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
Data Unavailable Due to System TimeoutThe contract opportunity titled "Data Unavailable Due to System Timeout" was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the Department of Defense. The contracting office is listed as the DDSP NEW CUMBERLAND FACILITY, with the primary place of performance located in New Cumberland, Pennsylvania, 17070-5002. No solicitation number, NAICS code, set-aside type, organization type, or point of contact information is available due to system limitations. Key details such as the prime contract, subcontractors, suppliers, or specific requirements cannot be retrieved, and all associated data remains inaccessible. The official page for this opportunity can be accessed via the provided link, though no further contract specifics are currently available.

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
Small Business Subcontracting ParticipationSmall businesses are invited to participate as suppliers or sub-tier vendors under a prime contractor’s post-award small business representation for a Department of Defense procurement managed by the DDSP NEW CUMBERLAND FACILITY. The opportunity is structured to enable eligible small businesses to support contract execution through subcontracting arrangements, leveraging the prime’s representation to fulfill small business goals without a formal solicitation or set-aside classification. Performance of the work is centered at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002, and the submission window for participation begins on August 5, 2026, and closes on August 17, 2026. The opportunity is accessible via the DIBBS platform and does not include a specific NAICS code or agency organizational designation beyond the parent department, but it implies direct alignment with defense logistics and supply chain needs. Participation requires engagement with the prime contractor following award, and interested parties should prepare to demonstrate capability, compliance, and capacity to meet delivery and performance expectations under the prime’s subcontracting plan.

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Domestic Sourcing and Supply Chain ComplianceThis contract requires strict adherence to the Buy American Act and Berry Amendment by ensuring all supplied components originate domestically, with verifiable documentation proving domestic origin throughout the supply chain. All materials and components must comply with federal regulations mandating preference for U.S.-made products, particularly in defense-related procurement, and suppliers must provide traceable evidence of origin at every tier of production and distribution. The obligation extends beyond final assembly to include raw materials, subassemblies, and constituent parts, with noncompliance resulting in rejection of deliverables or contractual penalties. The contract is issued under the NAICS code 423830 for wholesale trade of miscellaneous durable goods and is structured as a subcontract under the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026. While no specific set-aside designation is applied, the emphasis on domestic sourcing restricts participation to entities capable of demonstrating full compliance with U.S. manufacturing and sourcing standards, making it essential for subcontractors to have robust internal verification systems and documented provenance records for all materials.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and ReportingThe contract requires the identification, labeling, and preparation of Safety Data Sheets for hazardous materials contained in delivered equipment, ensuring full compliance with OSHA and federal regulations. All activities must align with established standards for documenting chemical hazards, handling instructions, emergency measures, and regulatory information to ensure workplace and transportation safety. The work is tied to equipment delivered to the Department of Defense’s New Cumberland facility, with performance occurring at the specified location in Pennsylvania, zip code 17070-5002. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental or safety compliance. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the DDSP New Cumberland Facility. All proposers must demonstrate expertise in hazardous material documentation, regulatory adherence, and the ability to deliver accurate SDS documentation under federal contracting requirements. Failure to meet these standards could result in non-compliance penalties and rejection of delivered equipment.
Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
Supply of Air Conditioner KitsThe contract outlines the procurement and delivery of four military-spec air conditioner kits to be supplied to the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance localized at NEW CUMBERLAND, Pennsylvania, under ZIP code 17070-5002. The kits must fully comply with hazardous materials reporting standards and include complete Safety Data Sheets (SDS) to ensure regulatory adherence and operational safety in military environments. This subcontract under NAICS code 333415 is open for response until August 17, 2026, with the solicitation posted on August 5, 2026, through the DIBBS system. All deliverables are expected to meet rigorous military specifications and documentation requirements, emphasizing environmental and safety compliance along with timely fulfillment.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Compliance SupportThe contract titled Small Business Subcontracting and Compliance Support requires the provision of administrative and compliance services focused on small business representation, joint ventures, and socioeconomic certifications. The effort is intended to ensure adherence to federal regulations and facilitate proper utilization of small business programs within subcontracting arrangements, particularly in alignment with Department of Defense objectives. The work will involve managing documentation, verifying certification statuses, coordinating with small business entities, and maintaining compliance with applicable procurement and socioeconomic rules to support contract performance integrity. This solicitation is issued under NAICS code 541611, which corresponds to management consulting services, and is classified as a subcontract opportunity with a response deadline of August 11, 2026. Performance of the work is required at the New Cumberland location with a zip code of 17070-5002, under the oversight of the DDSP New Cumberland Facility within the Department of Defense. The procurement does not specify a set-aside type, and all interested parties must submit responses through the designated DIBBS portal by the stated deadline to be considered for award.
Administrative Management and General Management Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Logistics for Hazardous/Defense MaterialsThe contract seeks qualified providers to transport defense-related items, including hazardous and potentially radioactive materials, with strict adherence to destination inspection protocols to ensure compliance with federal safety and security standards. Services must be executed under stringent regulatory frameworks governing the handling and transit of sensitive materials, requiring specialized equipment, trained personnel, and documented procedures to mitigate risk during movement. Performance is tied to the New Cumberland, Pennsylvania location with a zip code of 17070-5002, and all activities must align with Department of Defense directives regarding classified and dangerous cargo transport. This subcontract, classified under NAICS code 484220 for other truck transportation, was posted on August 5, 2026, with a response deadline of August 11, 2026. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and bidders must be prepared to meet rigorous logistical, security, and environmental compliance requirements. The procurement is structured to ensure continuity of critical defense supply chain operations, emphasizing reliability, accountability, and regulatory conformity throughout the entire transportation lifecycle from origin to final inspection point.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Radioactive Materials Handling and NotificationThe contract requires the identification, assessment, and reporting of radioactive materials that exceed established regulatory thresholds in compliance with Department of Defense and Defense Federal Acquisition Regulation Supplement requirements. This subcontract is focused on ensuring strict adherence to federal standards for handling and documenting radioactive substances, with the primary performance location at the New Cumberland facility with a ZIP code of 17070-5002. The task involves routine monitoring and rigorous reporting protocols to maintain regulatory compliance and operational safety within DoD operations. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, indicating a tightly confined window for submission. The North American Industry Classification System code 541620 applies, suggesting the work is classified under scientific and technical consulting services, emphasizing expertise in radiation safety and regulatory reporting. The contracting agency is the Department of Defense through the DDSP New Cumberland Facility, and the requirement is accessible via the DIBBS platform, indicating its placement within a formal DoD procurement system for subcontractors to respond under a specific RFQ.
Environmental Consulting Services

POSTED

about 9 hours ago

DEADLINE

in 6 days
View Details