Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BLOWER, AIR BARRIER

Active
SPE8E7-26-T-3501Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits 26,000 units of a blower designed for air barrier applications under NSN 4140-01-677-6586, with a delivery deadline of 167 days after award. It is issued as a total small business set-aside under NAICS code 333413 by the Department of Defense through the DDSP New Cumberland Facility, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and the applicable revision is determined by the solicitation issue date. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise stated in the contract, and manufacturers may use either attribute or variable inspection methods under MIL-STD-1916. The solicitation requires complete data packages for both the approved and alternate parts, as no existing data is available. Responses are due by August 17, 2026, with the contract open through the DIBBS portal and managed by Kelly Mitchell as the primary point of contact.

General Info

26,000 blowers for air barriers, delivery in 167 days, small business set-aside, DLA standards, zero non-conformances required.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

RFQ SPE8E7-26-T-3501 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLOWER,AIR BARRIER
BLOWER<(>,<)> AIR BARRIER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 4140-01-677-6586 Quantity: 26 KT Purchase Request: 7017757471QTY: 26 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3471
This contract outlines the procurement of a centrifugal fan with part number 0574300003M and NSN 4140011665049, issued by DLA District San Joaquin under solicitation SPE8E7-26-T-3471. The requirement specifies delivery of 14 units with a delivery timeframe of 167 days from contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict compliance with DLA’s Master List of Technical and Quality Requirements, identified by R and I numbers, governs all technical and quality standards, superseding other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit of issue specified per contract. The fan must be free of intentionally added mercury or mercury-containing compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or naval-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract permits no variance in quantity, with delivery required no later than February 1, 2027, and original delivery due by December 23, 2026. Only approved suppliers including LAU Industries Inc and United Refrigeration Inc are qualified, and all shipments must be addressed to the designated DLA receiving warehouse.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3506
The contract pertains to the procurement of 11 tube axial fans with NSN 4140016766052 and part number 77A126678P7, supplied by Lockheed Martin Corporation and Mercury Systems, Inc. The equipment must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all documentation must adhere to standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Items are to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination after a 167-day delivery window, with an original required delivery date of February 18, 2027, and a needed ship date of February 1, 2027. The delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation instructions follow DLAD Proc Notes C19 and C20. The contract is awarded under solicitation SPE8E7-26-T-3506 with a unit price of $11.00 per unit for a total of $121.00, classified under NAICS code 333413, and is administered by the Department of Defense through the DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E9-26-T-3317
The contract is for the procurement of 19 tube axial fans identified by NSN 4140-01-108-5796 and purchase request 7017758417, under solicitation SPE8E9-26-T-3317, with a unit price of $19.00 per unit and a total price of $361.00. Delivery is required within 167 days from the contract date, shipped FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while fully adhering to the more stringent DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements for Procurement, and all materials must be prepared without government identification if rejected. The delivery destination is the DLA Distribution Depot in Tinker AFB, Oklahoma, with the required ship date set for February 1, 2027, though the original delivery deadline was December 8, 2026. Transportation instructions reference DLAD Proc Notes C19 and C20, and the product falls under NAICS code 333413. The contracting activity is under the Department of Defense, with Matthew Kruc as the primary point of contact, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. This contract is subject to covered defense information provisions and the applicable revisions of the DLA Master List based on the solicitation issuance date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3475
This contract specifies the procurement of four tube axial fans identified by NSN 4140-01-300-4148 and part number 034399000 from Rotron Incorporated, with a unit price of $4.00 per unit and a total contract value of $16.00. Delivery is required within 124 days from the contract award, with shipment FOB origin, and the goods must arrive at the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates mandatory technical and quality standards from the DLA Master List of Technical and Quality Requirements, with compliance tied to the version effective on the solicitation issue date. All items must meet MIL-STD-130N for identification marking and MIL-STD-2073-1E for packaging, with marking per MIL-STD-129 and no special marking required. Packaging must avoid plastic wrapping, cushioning, or dunnage where possible, using specified methods and materials including dry preservation and Unit Container D3. The item is classified as a critical application item, and no mercury or mercury-containing compounds may be used in or come into direct contact with the hardware, except under limited exceptions specified by NAVSEA. Functional mercury in batteries, fluorescent lights, sensors, or chemical reagents is permitted only if the device includes a secondary containment barrier. The contract prohibits any quantity variance and requires inspection and acceptance at the destination, with a required delivery date of July 18, 2027, and a need ship date of December 20, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3476
The contract pertains to the procurement of a single axial vane fan with NSN 4140-01-302-9011 under solicitation SPE8E7-26-T-3476, issued by the Department of Defense through the Puget Sound office. The delivery is required within 167 days of award, and responses must be submitted by August 17, 2026. This item may require casting or forging during manufacturing, and since the government lacks the necessary tooling, vendors must submit a Casting and Forging Assistance Request if additional support is needed. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or any subsequent amendment. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or supplies, except for specific exceptions such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable items containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. No approved technical data package is currently available for this NSN, and vendors are directed not to submit requests to the DLA Troop Support Technical Data team. The point of contact for inquiries is Kelly Mitchell, reachable via email and phone provided in the contract data.
PUGET SOUND

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E9-26-T-3333
The contract is for the procurement of 13 tube axial fans with NSN 4140-01-313-1048 and part number BTA10 from IMS ENGINEERED PRODUCTS LLC, under solicitation SPE8E9-26-T-3333. The unit price is $13.00 per unit, totaling $169.00, with delivery required within 167 days of contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination, with packaging mandated to comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while all DLA Master List of Technical and Quality Requirements take precedence. Palletization must follow DLA Packaging Requirements for Procurement, and all packaging must be labeled per the specified Unit of Issue and Quantity per Unit Pack. Delivery is directed to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, and the shipment must be ready by February 1, 2027, though the original required delivery date was January 1, 2027. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 333413 for industrial machinery manufacturing. Covered Defense Information may apply, and no technical data package is currently approved by DLA Troop Support for this NSN. Transportation details are governed by DLAD Proc Notes C19 and C20, and the DoD unit of issue must be referenced against the official DLA unit of issue spreadsheet.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E9-26-T-3346
This contract specifies the procurement of a single centrifugal fan designated by NSN 4140012897911 and part numbers 3RE EXH, B3430-2, and R1-5446-CD-3430, supplied by FM AF, LLC 75477. The item is classified as a critical application item, requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or amendment date. The contract mandates compliance with MIL-STD-2073-1E packaging standards, specifying preservation method 50, drying, and the use of non-plastic materials where feasible, while marking must conform to MIL-STD-129 with no special marking codes. The delivery is FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The required delivery date is 167 days from contract award, with the original due date set for November 8, 2027, and a need ship date of February 1, 2027. Delivery is directed to DLA Distribution Puget Sound in Bremerton, WA, with transportation governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E9-26-T-3346, issued under NAICS code 333413 by the Department of Defense’s Construction & Equipment MRO Service I, with Matthew Kruc as the primary point of contact, and responses were due by August 17, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3468
The contract specifies the procurement of six axial flow fans identified by NSN 4140011654096 and part number 11439406, with delivery required within 167 days of contract award to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, superseding any conflicting standards such as ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129 and RP001 packaging requirements, with unit of issue as EA and zero variance permitted on quantity. The fan must be constructed and marked in accordance with MIL-STD-130N and the referenced drawing revision dated May 26, 1983, with technical specifications governing terminal orientation and construction details as outlined in the official drawing. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be palletized and prepared for shipment as defined in the contract. The solicitation number is SPE8E7-26-T-3468, issued by the Department of Defense through the DDSP New Cumberland Facility, with a response deadline of August 17, 2026, and the original required delivery date set for April 6, 2027. Correspondence and drawing access are to be coordinated through the DIBBS and QuickSearch portals, and the point of contact is Kelly Mitchell at DLA.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3510
The contract pertains to the procurement of an axial fan impeller with part number HAN 429-1 and NSN 4140017086372, supplied by HANSOME ENERGY SYSTEMS INC. A total quantity of nine units is required, with a unit price of $9.00, resulting in a total contract value of $81.00. Delivery is scheduled to be completed within 167 days from the award date, with delivery terms specified as FOB origin, and inspection and acceptance to occur at the destination. The packaging must strictly conform to MIL-STD-2073-1E, with specific packaging methods including preservation type 10, no corrosion inhibitors, no wrapping, and no cushioning or dunnage. Marking of shipments must follow MIL-STD-129 without any special marking codes, and palletization must meet DLA packaging requirements. The designated delivery point is the DLA Distribution facility at New Cumberland, Pennsylvania, with all transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 20, 2027, with a needed ship date of February 1, 2027. The solicitation number is SPE8E7-26-T-3510, issued under the NAICS code 333413, and technical and quality requirements are governed by the DLA Master List, incorporating referenced technical and quality standards denoted by R and I numbers. All documentation must align with DLA procurement protocols, including unit of issue conversions and supply handling procedures for government-controlled items, with non-accepted supplies subject to removal of government identification.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
HOUSING, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3525
The contract is for the procurement of two centrifugal housings under solicitation SPE8E7-26-T-3525 with NSN 4140-01-358-7865, requiring delivery within 167 days to the DLA Distribution San Joaquin facility in Tracy, California. The items must be furnished FOB origin with zero quantity variance, inspected and accepted at the destination, and packaged per MIL-STD-2073-1E with specific preservation, wrapping, and containment methods, including unit container D3 and packing code U. Marking must comply with MIL-STD-129 without special markings, and palletization follows DLA packaging requirements. Mercury and mercury-containing compounds are strictly prohibited except in specified functional applications such as certain batteries, lights, sensors, weapon systems, and chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Ozone-depleting substances are banned, and all technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements as of the solicitation issue date. The delivery must be completed by February 1, 2027, with the original required delivery date set for March 22, 2027. The contract falls under NAICS code 333413, with procurement managed by the Department of Defense through DLA Distribution San Joaquin, and all documentation must satisfy source approval request protocols.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CIRCULATING
Solicitation # SPE8E7-26-T-3485
The contract pertains to the procurement of 63 circulating fans with NSN 4140-01-478-2409 under solicitation SPE8E7-26-T-3485, issued by the Department of Defense’s New Cumberland facility. The delivery is scheduled for 167 days after award, with proposals due by August 17, 2026. Technical data associated with this item is subject to export controls under either ITAR or EAR, strictly prohibiting unauthorized disclosure to foreign persons, regardless of location, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and have received explicit approval from DLA authorities. The contract environment enforces cybersecurity compliance through CMMC Level 2 certification for third-party assessment organizations, and packaging must adhere to DLA-specific requirements. The NAICS code 333413 identifies the industry as fan and blower manufacturing. Point of contact for inquiries is Kelly Mitchell, with primary communication via email and phone. The place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and the solicitation is posted on the DIBBS portal. All contractors must ensure full compliance with export regulations and cybersecurity standards to be eligible for award.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details