Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BlueHalo Robo-Met.3D

Active
80TECH26RF0022Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA’s Information Technology Procurement Office is seeking to acquire BlueHalo’s Robo-Met.3D Automated Serial Sectioning System under a sole source contract authorized by FAR 6.103-1, as BlueHalo is the exclusive provider of this system capable of meeting the agency’s specific requirements for advanced 3D microstructural characterization at Kennedy Space Center. The acquisition will be conducted under FAR Part 12 as a commercial product purchase, leveraging existing commercial practices to streamline procurement. Interested parties may submit their capabilities and qualifications via email to Cory Rasnic no later than 12:00 PM CDT on July 24, 2026, solely to inform the Government’s decision on whether to pursue competitive bidding; however, the Government retains full discretion to proceed without competition based on the responses received. The solicitation number is 80TECH26RF0022, with a posted date of July 16, 2026, and a response deadline of 5:00 PM CDT on July 24, 2026. The contracting office is located in Greenbelt, Maryland, with performance taking place in Orlando, Florida, and the NAICS code is 334516. The acquisition includes the applicable NASA clause 1852.215-84, Ombudsman, and the Center Ombudsman for this procurement is listed on the official NASA procurement website. Primary point of contact is Cory Rasnic, with Jonathan Gomez serving as the secondary contact.

General Info

NASA sole-source buys BlueHalo’s Robo-Met.3D for 3D microstructural analysis at Kennedy Space Center under FAR Part 12.

Agency

National Aeronautics And Space Administration → NASA It Procurement OfficeView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Orlando, FL, 32899, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA It Procurement Office
Contacts2 people available
OfficeGreenbelt, MD, 20771, USA
Organization / Agency
National Aeronautics And Space Administration → NASA It Procurement Office
View Agency Profile
Office AddressGreenbelt, MD, 20771, USA
Contacts
Cory Rasnic
contact@example.gov
Jonathan Gomez
contact@example.gov

Full Description

Show more

NASA/Information Technology Procurement Office (ITPO) has a requirement for BlueHalo’s Robo-Met 3D Automated Serial Sectioning System for Kennedy Space Center (KSC) to provide advanced three dimensional (3D) microstructural characterization capabilities.


NASA/ITPO intends to issue a sole source contract to acquire the items from BlueHalo, LLC under the authority of FAR 6.103-1, Only one responsible source and no other supplies or services will satisfy agency requirements. BlueHalo is the sole source provider for the Robo-Met.3D Serial Sectioning System.


The Government intends to acquire a commercial product or service using FAR Part 12.


Interested organizations may submit their capabilities and qualifications to perform the effort electronically via email to Cory Rasnic at cory.t.rasnic@nasa.gov not later than 12:00 PM CDT on 7/24/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether to conduct this acquisition on a competitive basis. A decision by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government.


NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at : https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf


Similar Contracts

Same NAICS industry code

NAICS: 334516
New
SLED
Sole source notice for an Gas Cluster Ion Beam (Argon Source) SystemThe University of Mississippi is issuing a sole source solicitation for a Gas Cluster Ion Beam System with an Argon Source, identified by solicitation number 9270-27-R-RFIN-00001, with a posted date of July 20, 2026, and a response deadline of August 4, 2026. The procurement is categorized under a state and local government (SLED) procurement and is being conducted without competitive bidding due to the specialized nature of the equipment, which requires a specific technology only available from a single provider. The system is intended for advanced materials research and processing applications, and performance will occur within the state of Mississippi. Primary contact for this solicitation is Jeff Wells, reachable at jeffw@olemiss.edu or 662-915-7448. There is no designated set-aside classification, and the NAICS code is not specified. The contract is administered by the University of Mississippi’s Mississippi office, and all proposals must be submitted by the stated deadline to be considered. The official portal for additional details and submission guidelines is provided through the Mississippi state contract bidding website.
UNIVERSITY of MISSISSIPPI

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334516
New
DIBBS
Resolver Support Unit Manufacturing and AssemblyThe contract entails the full manufacturing and assembly of 30 resolver support units, covering every phase from production and quality control to packaging and final shipment. The work is performed under a subcontract arrangement for the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 334516 indicating classification within the navigational, measuring, electromedical, and control instruments manufacturing sector. All deliverables must meet stringent defense standards, ensuring reliability and precision for operational use. The contract was posted in July 2026 and is managed under the reference number SPE7L126P9036, with performance expectations aligned to meet the needs of a federal defense program. No set-aside provisions are specified, and the place of performance is not detailed, suggesting flexibility in location so long as the final units are delivered in compliance with contractual requirements.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 334516
New
DIBBS
Supply of ARM, SWITCH ACTUATOR (NSN 5930-01-298-3505)The contract involves the manufacture and supply of twelve precision electromechanical switch actuators fully compliant with the military National Stock Number (NSN) 5930-01-298-3505, ensuring adherence to stringent defense standards for performance, reliability, and environmental resilience. All units must meet exacting traceability requirements, including full documentation of materials, batch numbers, manufacturing processes, and quality control inspections to support military logistics and maintenance operations. Production is governed under NAICS code 334516, indicating specialized electronic component manufacturing, and the work is being procured as a subcontract under the Defense Logistics Agency, representing the Department of Defense’s centralized supply chain. The contract was posted on July 20, 2026, and is identified by the award reference SPE7M824V2252, though no solicitation number is provided, suggesting it may have been issued directly through a pre-qualified vendor channel. Place of performance and point of contact details are omitted from the record, but the work is intended to support DLA’s broader mission of equipping and sustaining U.S. military systems. The absence of set-aside information indicates the opportunity is open to any qualified supplier, regardless of business size or status, with the sole focus on technical compliance and fulfillment of military-grade specifications.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 334516
New
DIBBS
Electrostatic Discharger Manufacturing and AssemblyThe contract entails the full production, assembly, testing, and delivery of 62 electrostatic dischargers in strict adherence to military specifications, ensuring all components and processes meet rigorous defense standards. Quality assurance is governed by ISO 9001:2008 and AS9100 certification requirements, with explicit protocols in place to prevent the inclusion of counterfeit parts throughout the supply chain. The work falls under NAICS code 334516, indicating classification within the other electronic component manufacturing sector, and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. All activities are expected to comply with the technical and procedural mandates of the military supply chain, with delivery obligations tied directly to mission-critical defense operations.
Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANAThe measuring tube for gas analyzer is designed to measure carbon dioxide content in compressed gases with a range of 100 to 3000 parts per million for one liter of air. It is a glass tube with rounded, melted ends and is packaged in quantities of ten per package designated as PG. The item is identified by NSN 6630-12-189-3126 and is governed by the procurement document SPE2DH-26-T-5302. As a Type I (Code M) shelf-life item, it must have a non-extendable shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of Medical Marking Standard No. 1. Packaging must be commercial grade, sealed to prevent damage or breakage, and placed in suitable exterior shipping containers that ensure safe delivery at the lowest carrier rate to the specified point of delivery. All markings must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is subject to DLA packaging requirements, potential exposure to covered defense information, and requirements for removal of government identification from non-accepted supplies. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and delivery is required within 20 days after award for a quantity of eight packages.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334516
New
Federal
Rigaku Supermini 200The contract titled Rigaku Supermini 200 is a special notice issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration for the procurement of a Rigaku Supermini 200 instrument. It was posted on July 20, 2026, with a response deadline set for July 23, 2026, at 6:00 p.m. Eastern Time. The NAICS code assigned is 334516, indicating classification under Laboratory Analytical Instrument Manufacturing. The office address is listed at Stennis Space Center in Mississippi, while the place of performance is specified as Houston, Texas, with a zip code of 77058. The primary point of contact for inquiries is Cara Craft, reachable via email at cara.s.craft@nasa.gov. No set-aside type is designated for this opportunity, meaning it is open to all eligible contractors without preferential treatment based on business size or status. All details and requirements are to be referenced in the attached solicitation documents.
NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
NOTICE OF INTENT TO SOLE SOURCE: One (1) Chemical Vapor Deposition (CVD) SystemThe U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, has issued a notice of intent to sole source a single Chemical Vapor Deposition (CVD) system under solicitation number W911QX26QA121. This procurement is categorized under NAICS code 334516, which pertains to semiconductor and other electronic component manufacturing, and is intended for performance at Aberdeen Proving Ground in Maryland, with a zip code of 21005. The notice was posted on July 20, 2026, and all responses must be submitted by the deadline of July 28, 2026, at 3:59 p.m. Eastern Time. The acquisition is not set aside for any specific small business or demographic category, and the sole source justification implies that only one vendor is capable of meeting the government’s technical or operational requirements. Jamie N White serves as the primary point of contact, reachable via email at jamie.n.white2.civ@army.mil, for inquiries related to the solicitation. The full details of the requirement are outlined in the attached salient characteristics document, and additional information can be accessed through the provided SAM.gov link.
W6QK Acc-Apg Adelphi

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334516
New
Federal
Graywolf Sensing Solutions Advanced Sense XM monitor with DSXM-8 Probe KitThe Defense Health Agency Contracting Activity intends to award a sole source Firm-Fixed-Price contract to Graywolf Sensing Solutions for the purchase of specialized air quality monitoring equipment, including the Advanced Sense XM monitor with DSXM-8 Probe Kit, AS-202A Articulating Hotwire Anemometer, and PC-3500 Particle Meter, to support the Defense Centers for Public Health – Aberdeen. Graywolf Sensing Solutions is recognized as the exclusive manufacturer of these instruments, with proprietary software and hardware that restricts maintenance, sensor replacement, and firmware updates to the original vendor exclusively. Third-party procurement would render the equipment incompatible with existing calibration and maintenance protocols, invalidating measurement accuracy and compliance. The equipment is not available through distributors or federal contract vehicles such as GSA, reinforcing the necessity of direct acquisition from the manufacturer. Delivery is scheduled for August 30, 2026, under NAICS code 334516 with a size standard of 1,250 employees. This procurement follows statutory authority 12.102(a) and meets the synopsis requirements of FAR 5.102(a)(6) and 5.203(a). A 15-day window is open for public comment following the July 20, 2026, posting, with responses due by August 5, 2026. No competitive bidding is being conducted, and the contract will be awarded as sole source if no substantive objections are received by the deadline. The sole point of contact for inquiries is Christopher Cook, reachable via email or phone. The equipment will be delivered to Aberdeen Proving Ground, Maryland, and no set-aside provisions apply to this acquisition.
Defense Health Agency (dha)

POSTED

about 14 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334516
New
Federal
193 nm ArF Excimer Laser Ablation SystemArgonne National Laboratory is soliciting offers for a 193 nm ArF Excimer Laser Ablation System under solicitation number 6-S176-Q-00355-00, with an award based on the Lowest Price, Technically Acceptable (LPTA) methodology. The system must be delivered, installed, calibrated, and accompanied by on-site operator training at the laboratory’s facility in Lemont, Illinois, with FOB Destination terms specifying acceptance upon physical receipt at the site. Vendors must submit a comprehensive quotation package including fully completed and signed ANL-70 and ANL-70B forms, the LPTA Addendum, technical documentation proving compliance with all minimum specifications, country of origin certification consistent with FAR 52.225-1 Buy American requirements, and lead time from purchase order receipt to final delivery and installation. Country of origin must meet the thresholds of 65 percent U.S.-made components for deliveries between 2024 and 2028, rising to 75 percent starting in 2029, with components of unknown origin treated as foreign and certain foreign components treated as domestic if not reasonably available domestically. The solicitation requires strict adherence to federal and DOE-specific regulations, including compliance with 10 CFR Part 851, OSHA standards, and environmental and hazardous materials regulations. Contractors must implement counterfeit part prevention, use only authorized supply chains, and ensure all materials meet safety and quality standards. All offerors must register with SAM.gov and provide a Unique Entity ID, and must complete extensive representations and certifications covering socioeconomic status, conflict of interest, contingent fees, child labor, and the use of prohibited telecommunications equipment under FAR 52.204-25 and cybersecurity mandates under FAR 52.204-21. Contractor personnel must undergo safety orientation, complete Job Safety Analysis documentation, and comply with personal identity verification requirements under HSPD-12, including the issuance and return of government-issued credentials to maintain site access. Additional requirements include adherence to whistleblower protections, traffic in persons compliance, and affirmative action obligations for qualifying contractors. The contract includes termination for cause and termination for convenience clauses, and payment is to be processed via check, ACH, wire, or credit card, with specific forms required for wire payments and foreign vendors. No contract value is disclosed, and submission is due by July 23, 2026, to Argonne National
Argonne National Labor - DOE Contractor

POSTED

about 14 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
Smart Golden Gate, ZnSe Lenses, and Golden Gate Heated Diamond ATR Top Plate and Heated Temp Controller. Brand Name *OR* Equal.The Chemical Sciences Division at Oak Ridge National Laboratory is seeking the procurement of one Smart Golden Gate with ZnSe Lenses and one Golden Gate Heated Diamond ATR Top Plate with Heated Temperature Controller under solicitation RFQSSPR486592, issued by UT-Battelle, LLC, acting as a DOE contractor. Deliveries are to be made to the facility in Oak Ridge, Tennessee, with all equipment required to meet detailed specifications outlined in Attachment C, the Bill of Materials, though the attachment itself is not provided. The contract includes a brand-name-or-equal provision, and all items must comply with applicable electrical safety standards, requiring NRTL certification or field evaluation. Performance is restricted to U.S. citizens or lawful permanent residents due to federal facility access requirements, and work is subject to DOE-specific regulations including worker safety, nuclear safeguards, and protection against conflict of interest. Contract compliance enforces stringent cybersecurity and data handling protocols, mandating adherence to NIST SP 800-171 for Controlled Unclassified Information and FIPS 140-2 for cryptographic systems, with all personally identifiable information strictly confined within the United States. Contractors must maintain commercial general liability, professional liability, and cyber liability insurance each at $2 million, with carriers rated A-/VIII or better by A.M. Best. Security incident reporting must occur within one hour of discovery, and audit rights extend to all aspects of data handling and compliance. Personnel must undergo Personal Identity Verification, and subcontractors are bound by the same flow-down obligations. Invoicing must be processed through the Ariba Network, and while the contract value is unstated, the Buy American Act applies to purchases exceeding $15,000. No evaluation factors, pricing details, or clear delivery schedule are disclosed, and no formal contracting officer, COR, or COTR information is provided, with all communications directed through the designated procurement point of contact, Scott Scarbrough, at scarbroughws@ornl.gov.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334516
New
Federal
6640--Molecular Testing PlatformThe solicitation, numbered 36C25727Q0004, is a combined synopsis and request for quotation issued under the Revolutionary FAR Overhaul for commercial products and services, seeking quotes for a Molecular Testing Platform. It is unrestricted and requires vendors to be registered in SAM with NAICS code 334516; Service-Disabled Veteran-Owned Small Businesses and Veteran-Owned Small Businesses must also be certified in SBA.gov to qualify. All submissions must be sent via email to Jose Campa at jose.campa@va.gov by 10:00 AM/CST on August 5, 2026, with no hard copy or fax submissions accepted. Late responses may be considered only if they benefit the Government, and quoted materials must not exceed 25 megabytes in total file size. The place of performance is Amarillo, Texas, and only submissions received by the stated deadline will be evaluated. Questions or inquiries must be submitted in writing no later than July 24, 2026, at 3:00 PM/CST. The contracting officer, Jose Campa of the Department of Veterans Affairs, Network Contracting Office 17 in San Antonio, Texas, is the sole point of contact for all communication related to this solicitation.
257-NETWORK Contract Office 17 (36C257)

POSTED

about 14 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334516
New
Federal
6640--KIT, 10-TEST, MRSA NXG, IVD, GXThe Department of Veterans Affairs Network 08 Contracting Office is seeking a lease or reagent rental agreement for the Microbiology Department at the Miami VAHCS to support real-time PCR nucleic acid testing for multiple infectious agents including Clostridium difficile including the Epidemic 027 Strain from stool samples, Methicillin Resistant Staphylococcus aureus from nasal swabs, SARS-CoV-2, Influenza A & B and RSV, Group A Streptococcus from throat swabs, and Mycobacterium tuberculosis resistance to Rifampin from sputum. The agreement must cover equipment, service calls including routine maintenance beyond standard user maintenance, reagents, and consumables on a cost-per-kit or cost-per-test basis, and is structured for a base period with up to four optional years. The contract falls under Product Code 6640 Laboratory Equipment and Supplies with a NAICS code of 334516, and all vendors must be authorized distributors with documentation to prove authorization. Responses must be submitted electronically via email to david.henry3@va.gov and must adhere strictly to the requirements outlined in the solicitation package 36C24826Q0764, posted on SAM.gov on or about July 23, 2026, with a firm deadline of August 3, 2026 at 2:00 PM EDT. No paper copies will be mailed, and it is the offeror’s responsibility to monitor SAM for amendments. Vendors must confirm their status as either a manufacturer or nonmanufacturer using clause 852.219-78 if applicable and submit the required certification signed and completed. Only items that are immediately in stock and available for delivery may be quoted, and all quotations must be concise and directly aligned with the specified testing requirements. The place of performance is in Miami, Florida, and inquiries should be directed to the designated Contracting Officer.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA It Procurement Office

Same awarding agency

NAICS: 334515
New
Federal
KeySight Signal Analyzers for KSCThis solicitation is a combined synopsis and Request for Quotations for KeySight Signal Analyzers under solicitation number 80TECH26QA081, issued by NASA’s It Procurement Office under the authority of FAR Subpart 12.6 for commercial items. The procurement is conducted using a Lowest Price Technically Acceptable evaluation method and is restricted to the brand-name product per a Justification for Other Than Full and Open Competition. The NAICS code 334515 applies with a small business size standard of 750 employees, and quoters must declare their small business status. All quotes must include a firm fixed price covering all costs including shipping, delivered FOB Destination to NASA Kennedy Space Center in Florida, within 17 weeks of award. The quote must be submitted as a PDF and include the solicitation number, delivery schedule, payment and warranty terms, taxpayer identification number, and any special commercial terms, signed by an authorized representative. The vendor must comply with FAR 52.212-1 and FAR 52.212-4, and NASA Clause 1852.215-84 applies. No further communications are anticipated unless the Government determines it is advantageous, and quotes may be eliminated without explanation if technically or price-wise noncompetitive. Questions must be submitted via email by July 22, 2026, and quotes must be electronically received by July 23, 2026, by 4:00 PM ET; failure to meet these deadlines results in ineligibility. The Government assumes no responsibility for electronic transmission failures.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 14 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334516
New
Federal
BRAND NAME OR EQUAL IX05 ULTRA-FAST NANOINDENTERThis solicitation seeks quotations for an Oxford iX05 Nanoindenter or an equal product under solicitation number 80TECH26QA090, issued as a combined synopsis and request for quotations in accordance with FAR Part 12 for commercial items. The requirement is for a brand name or equal procurement, where substitute products must meet the specified salient physical, functional, or performance characteristics outlined in the Statement of Work and include clear identification through brand name, model number, descriptive literature, and any modifications made to conform to requirements. Quotes must be submitted as a PDF and include the solicitation number, FOB destination terms, delivery schedule, payment terms, warranty details, taxpayer identification number, and any special commercial terms, signed by an authorized representative. The contract is subject to FAR 52.212-1 and 52.212-4, with no application of FAR Part 15, and the government will use a Lowest Price Technically Acceptable evaluation process to award to the lowest quote that meets or exceeds technical standards, among vendors that qualify as small businesses under NAICS code 334516 with a size standard of 1,000 employees. All costs, including shipping, must be included in a firm fixed price. Delivery is required to Building 1205, Room 151 at NASA Langley Research Center in Hampton, Virginia, no later than December 31, 2026, with FOB destination terms. Quoters must submit responses via email by 4:00 PM ET on July 23, 2026, and any questions must be submitted electronically to Jonathan Gomez and Nicolas Zogaib no later than July 21, 2026, at 4:00 PM ET. Telephone inquiries are not accepted. The quote must contain all required information as specified in the solicitation, and incomplete or late submissions will be deemed ineligible. The government is not responsible for failures in electronic transmission, and vendors are responsible for downloading the solicitation and any amendments from Sam.gov. The NASA Ombudsman clause applies, and while no formal set-aside is used, small business status must be declared. The evaluation will be based solely on the information provided in the quotation, and no additional information will be sought by the government unless deemed advantageous.
Analytical Laboratory Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 513210
New
Federal
CyboSoft's Model-Free Adaptive (MFA) SoftwareNASA’s Information Technology Procurement Office is seeking to acquire CyboSoft’s Model-Free Adaptive (MFA) Software for use at Armstrong Flight Research Center to deliver adaptive thermal control without requiring a pre-developed system model, detailed system identification, or extensive controller tuning. The acquisition is planned as a sole source procurement under FAR 6.103-1, as CyboSoft is identified as the exclusive provider of this proprietary software, with no other alternatives available to meet the agency’s specific technical needs. The Government intends to procure the commercial product under FAR Part 12, aligning with established practices for commercial item acquisitions. Interested parties may submit documentation of their capabilities and qualifications via email to Sara Stuart by 5:00 PM CDT on July 23, 2026, to assist the Government in determining whether competitive procedures are warranted, though the decision to proceed without competition remains at the Government’s sole discretion. The solicitation number is 80TECH26RFI0021, posted on July 16, 2026, with a NAICS code of 513210, and the performance location is in California, while the contracting office is based in Greenbelt, Maryland. The NASA clause 1852.215-84 regarding the Ombudsman applies, and additional assistance can be accessed through the official Procurement Ombudsman listing.
Software Publishers

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 811212
Federal
OEM Sustainment and Configuration ManagementThe contract encompasses the long-term sustainment of the Phantom T2540 system through the provision of certified hardware and validated firmware, ensuring strict configuration control and sustained operational reliability. All support activities must maintain system integrity by adhering to established technical standards and lifecycle management practices, with a focus on minimizing downtime and preserving mission-critical performance over the extended contract period. The work is tied directly to the ongoing operational needs of the system in use at Stennis Space Center, where the hardware and software must remain up to date with approved revisions and validated updates. This subcontract, issued under the NAICS code 811212, is managed by the NASA IT Procurement Office on behalf of the National Aeronautics and Space Administration. Performance is required exclusively at the Stennis Space Center location with zip code 39520, and the contract is structured to ensure continuity of support through approved supply chains and verified technical processes. No set-aside status is designated, and the contract emphasizes compliance with NASA’s technical and logistical requirements for critical infrastructure sustainment, with no flexibility permitted in hardware or firmware sources outside the approved and certified baseline.
Computer and Office Machine Repair and Maintenance

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 541690
Federal
Optical Imaging and Data Capture for Rocket TestingThe contract requires the operation and optimization of the Phantom T2540 high-speed imaging system to capture critical transient events during rocket propulsion tests, including ignition sequences, shock wave formations, plume behavior, and component failures. The work must be performed at Stennis Space Center, Mississippi, with precise timing and spatial resolution to ensure high-fidelity data collection essential for analyzing performance and failure modes of rocket systems. The successful performer must ensure system calibration, environmental stability, and data integrity under high-vibration and high-temperature test conditions. This subcontract falls under NAICS code 541690 for other scientific and technical consulting services and is managed by NASA's IT Procurement Office on behalf of the National Aeronautics and Space Administration. The contract supports mission-critical rocket testing activities and demands expertise in high-speed optical diagnostics, real-time data acquisition, and post-processing analysis. The effort is aligned with NASA’s broader goals of advancing propulsion technology through detailed visual diagnostics. Performance expectations include reliability under operational stress, rapid system readiness between test scenarios, and delivery of synchronized, timestamped imagery for engineering review.
Other Scientific and Technical Consulting Services

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Precision Timing and Synchronization ServicesThe contract requires specialized expertise in nanosecond-level timing and sub-microsecond exposure control to precisely synchronize the Phantom T2540 high-speed camera with rocket propulsion test events. The work demands deterministic hardware solutions to ensure exact temporal alignment between camera triggers and dynamic engine testing phenomena, enabling high-fidelity data capture critical to propulsion analysis. This service is essential for capturing transient events during rocket firings where timing accuracy directly impacts the validity and usefulness of recorded imagery. The performance location is designated as Stennis Space Center with a zip code of 39520, and the contract falls under NAICS code 541715, reflecting its classification as scientific research and development services. This is a subcontract issued by NASA’s It Procurement Office on behalf of the National Aeronautics and Space Administration, aimed at procuring advanced synchronization technology to support propulsion testing operations. The solicitation was posted on June 25, 2026, and though no set-aside type or point of contact is specified, the technical requirements underscore the need for highly specialized, mission-critical timing capabilities integrated into live test environments.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
High-Speed Imaging System IntegrationThe contract involves the integration of the Phantom T2540 high-speed camera system with NASA’s existing data acquisition and control infrastructure at the Stennis Space Center, ensuring seamless compatibility without altering any validated workflows or timing protocols. The work requires precise synchronization and deterministic timing to maintain the integrity of critical test data, with all system interactions designed to operate within established performance parameters. The solution must preserve the proven reliability of current operations while incorporating the advanced imaging capabilities of the Phantom T2540. This subcontract, classified under NAICS code 541330, is managed by the NASA It Procurement Office and is performance-bound to the Stennis Space Center facility at 39520. The engagement demands technical expertise in high-speed imaging systems and deep familiarity with NASA’s operational environments, with no room for deviations from certified procedures. The integration effort focuses solely on interfacing the new camera system with legacy systems, avoiding any modification to existing software, hardware, or timing architectures to ensure continued compliance with mission-critical standards.
Engineering Services

POSTED

26 days ago

DEADLINE

N/A
View Details
NAICS: N/A
Federal
No subcontract or supplier opportunities availableThis contract is a sole-source procurement issued by the NASA IT Procurement Office for proprietary data acquisition system hardware exclusively from Pacific Instruments. The acquisition does not allow for any subcontracting or supply opportunities as all components and integration services must be provided directly by the original manufacturer, ensuring strict control and consistency in the hardware's performance. The contract specifically supports operations at the Stennis Space Center, with the unique and non-divisible nature of the equipment emphasizing the specialized requirements of this technology. No set-asides or alternative sourcing options are applicable, reflecting the proprietary status of the hardware and limiting competition to Pacific Instruments alone. Given the absence of a solicitation number and detailed point of contact, this procurement appears streamlined and targeted. The restricted scope and location underline the critical need for tightly integrated, manufacturer-specific solutions within NASA’s technology infrastructure.

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Training Development & Technical Support DeliveryThis contract involves the development of specialized training materials tailored specifically for NASA, focusing on federal acquisition workflows and the usage of the iSiteCMP platform. Additionally, it includes providing help desk support to assist users in navigating these systems effectively. The scope ensures that the training and technical support are customized to meet NASA's operational requirements within its procurement processes. The contract is classified under NAICS code 611430, which pertains to professional and management development training services. It is a subcontract awarded by the NASA IT Procurement Office, with the place of performance located in Hampton, Virginia (zip code 23666). Though the solicitation number and set-aside details are not specified, the contract's main objective centers on enhancing NASA's acquisition capabilities through targeted training and reliable support services.
Professional and Management Development Training

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541513
Federal
Data Migration & System Configuration ServicesThis contract involves the migration of legacy contract data into the iSiteCMP platform for NASA, focusing on ensuring data integrity and enhanced system functionality. Key tasks include data cleansing to eliminate inaccuracies, schema mapping to align old data structures with the new system, configuring workflows to optimize processes, and setting up security groups to manage access controls across multiple NASA centers. The subcontract falls under NAICS code 541513, which pertains to computer systems design services, and is managed by the NASA IT Procurement Office. The work will primarily take place in Hampton, Virginia, with an emphasis on coordinating system integration to support NASA's operational needs efficiently. This comprehensive approach aims to modernize contract data handling and improve security and usability within NASA’s administrative framework.
Computer Facilities Management Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541512
Federal
Custom Report Development & Integration EngineeringThis contract involves the development and integration of specialized financial and performance reporting tools tailored for NASA, focusing on the creation of 533M/533Q reports and the automation of funding obligation processes within the iSiteCMP platform. The work aims to enhance NASA's reporting capabilities by providing customized solutions that streamline data management and improve accuracy in financial oversight. The subcontract falls under NAICS code 541512, indicating a focus on computer systems design services, and is managed by NASA's IT Procurement Office. The performance location is Hampton, Virginia, with the specified ZIP code of 23666. This project underscores NASA's commitment to leveraging advanced engineering and software development services to optimize their internal report generation and funding workflows.
Computer Systems Design Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 541611
Federal
FedRAMP Compliance & Security Operations SupportThis contract involves providing ongoing support to maintain the FedRAMP Moderate Authorization for the iSiteCMP platform, ensuring its continuous compliance with federal security requirements. Activities under this contract include continuous monitoring of the system, updating security controls to address emerging threats, conducting regular vulnerability scanning, and managing the Authority to Operate (ATO) renewal process. The goal is to sustain the platform’s security posture and keep it aligned with FedRAMP standards. Issued by the NASA IT Procurement Office, the subcontract falls under NAICS code 541611, which covers administrative management and general management consulting services. The primary location for performance is Hampton, Virginia, with a ZIP code of 23666. The contractor will support NASA in maintaining cybersecurity compliance for its critical platform, facilitating uninterrupted and secure operations within a regulated federal environment.
Administrative Management and General Management Consulting Services

POSTED

about 2 months ago

DEADLINE

N/A
View Details