Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, CENTERING

Active
SPE7L4-26-T-5975Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one centering bolt, identified by NSN 5306-01-163-4851 and part number 10512246, under solicitation SPE7L4-26-T-5975, with a required delivery in five days FOB origin. The item must comply with all technical and quality requirements stipulated in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines, and all labeling must include the correct Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the destination, with zero non-conformances mandated in sampling unless otherwise stated, using MIL-STD-1916 or comparable zero-based plans, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The delivery address and mark-for location are identical, designated for the PM Stryker Log Demo GDLS facility in Sterling Heights, Michigan, and shipment must occur via the fastest traceable means, excluding parcel post. The contract mandates strict adherence to government protocols for covered defense information and includes specific administrative codes for government use, with the original required delivery date set for August 4, 2026.

General Info

Procure one centering bolt NSN 5306-01-163-4851, deliver FOB origin by August 4, 2026, comply with MIL-STD and DLA requirements.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

38500 MOUND RD, STERLING HEIGHTS, MI, 48310-0000, US

Set-Aside

NONE

Documents

(1)

SPE7L4-26-T-5975.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
ANNA-RACHELLE BETTS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,CENTERING
BOLT, CENTERING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
GENERAL DYNAMICS LAND SYSTEMS CANADA 56161 P/N 10512246
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722273 0001 EA 1.000
NSN/MATERIAL:5306011634851
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7L4-26-T-5975
SECTION B
PR: 7017722273 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W508DY
W6DX CPE GCP WARREN
PM STRYKER LOG DEMO GDLS
38500 MOUND RD
STERLING HEIGHTS MI 48310-0000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W508DY
W6DX CPE GCP WARREN
PM STRYKER LOG DEMO GDLS
38500 MOUND RD
STERLING HEIGHTS MI 48310-0000
US
MARKFOR
W508DY
W6DX CPE GCP WARREN
PM STRYKER LOG DEMO GDLS
38500 MOUND RD
STERLING HEIGHTS MI 48310-0000
US
M/F: (TCN) W909536210E504
RDD: 220
PROJ: G6D TP 1
SUPP ADD: W508DY SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: CO
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7L4-26-T-5975 NSN/Part Number: 5306-01-163-4851 Quantity: 1 EA Purchase Request: 7017722273QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11RS
The contract specifies the procurement of 9 units of a socket head cap screw, self-locking, identified by NSN 5305007214734 and part number NAS1190E04P12N, with a unit price of $9.00 and a total price of $81.00. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, under FOB origin terms, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers, and marking per MIL-STD-129 with no special marking required. The hardware must conform to the current revision of the National Aerospace Standard, with previously applicable revisions accepted for prior production but not for new manufacturing post-solicitation. All items must adhere to strict technical and quality requirements referenced through the DLA Master List, including sampling protocols per MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specified verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in the product and its packaging except for limited functional uses as defined, and all packaging materials must also be mercury-free. A Certificate of Quality Compliance is required, and identification marking must follow MIL-STD-130N unless otherwise specified. The contract includes all applicable CDRLs and is governed by DoD procurement standards, with the solicitation issued under SPE4A6-26-T-11RS and a response deadline of August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BARREL
Solicitation # SPE4A6-26-T-11YC
The contract is for the procurement of 1,170 plain barrel nuts with NSN 5310-01-213-7628 under solicitation SPE4A6-26-T-11YC, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, with responses due by August 12, 2026. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and applying equally to U.S. companies and their foreign subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The contract also requires adherence to DLA packaging standards, CMMC Level 2 certification for third-party assessors, physical item marking specifications, configuration change management through Engineering Change Proposals, and any approved variances. The place of performance is New Cumberland, Pennsylvania, with primary point of contact Ashley Jones-Turner.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11QZ
The contract pertains to the procurement of 523 retaining rings with NSN 5325-00-558-6947 under solicitation SPE4A6-26-T-11QZ, issued by the Department of Defense’s ASC Commodities Division. The requirement is fully competitive and governed by military or federal specifications, with delivery due within 49 days of award to Cherry Point, North Carolina, at ZIP code 28533-5040. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition type. The item is designated as critical, triggering the need for origin inspection and adherence to stringent packaging, marking, and identification standards including physical bare item marking and removal of government identification from non-accepted supplies. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and covered defense information provisions may be applicable. The point of contact for inquiries is Marchello Fields, reachable via phone or email provided in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12FT
The contract specifies the procurement of a PIN-RIVET component designated as P/N HL413V-6-4, compliant with stringent military and aerospace standards including MIL-STD-130 for part marking, ASME Y14.5 for dimensions and tolerances, and ASME B46.1 for surface texture. Threads must conform to SAE AS8879, and lubrication is required per MIL-L-87132 Type I or III, with Cetyl Alcohol as an optional alternative to HI-SHEAR Spec 305. The part is subject to configuration management and documentation requirements tied to the DLA Master List of Technical and Quality Requirements, with specific controls for sourcing approval, packaging, and deviation requests. The item is classified as a Critical Application Item and must be marked per RQ017 with Government Identification retained unless non-accepted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are verified at strict levels VII, IV, and II. The contract mandates packaging in accordance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements RP001. Delivery is FOB Origin, with inspection and acceptance points at destination, and no quantity variance permitted. The required delivery date is January 31, 2027, with a 171-day lead time, and the item is to be shipped to DLA Distribution Depot Oklahoma at Tinker AFB. The Solicitation Number is SPE4A6-26-T-12FT, with 42 units priced at $42.00 each, totaling $1,764. The NSN is 5320-01-707-8438, and the award is open to approved suppliers including HI-SHEAR CORPORATION, SPS TECHNOLOGIES, LLC, WEST COAST AEROSPACE, INC., and HOWMET GLOBAL FASTENING SYSTEMS INC. All requirements are governed by federal acquisition protocols under the Department of Defense, with point of contact Paul Askew at DLA Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSI
Solicitation # SPE4A6-26-T-12JU
The contract pertains to the procurement of a washer, spring tension, identified by NSN 5310-01-678-4038 and part number 9714K112, with a single unit requirement of one packing group. Delivery is required within 20 days to the destination specified as the Field Maintenance Shop in Johnston, Iowa, under FOB Origin terms with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including unit packaging marked per MIL-STD-129 without special marking codes, and palletization must adhere to DLA packaging regulations. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or an equivalent zero-based method, and non-conformances must be zero unless otherwise specified. The item must be shipped by the fastest traceable method excluding parcel post, with shipments tracked under RDD 777. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and covered defense information may apply. The contract was issued under solicitation SPE4A6-26-T-12JU with a required delivery date of July 29, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-12EV
The contract pertains to the procurement of 64 units of a socket head cap screw, identified by NSN 5305-01-720-1042 and part number M1222SN5C320NCLN, manufactured to meet MIL-DTL-1222J specification. All supplies must comply with stringent technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The item is designated as a critical application component, and strict prohibition is in place against intentional incorporation or direct contact of mercury or mercury-containing compounds, except for limited exceptions such as batteries, fluorescent lamps, sensors, and chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise stated. Delivery is FOB origin with a 171-day lead time, final delivery due by January 31, 2027, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must adhere to DLA packaging requirements and prohibits mercury in preservation, packing, or marking. The unit of issue is each, quantity is fixed with zero variance, and the point of contact is Bernice Adams at DLA.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5973
The contract specifies a single unit of a special-purpose electrical cable assembly with NSN 5995-01-623-4267, requiring delivery within five days FOB origin, with no tolerance for quantity variance. The item must meet stringent technical and quality standards defined by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, including palletization per RP001, and all markings must adhere to established military protocols. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, enforcing zero non-conformances unless otherwise contracted. The cable assembly is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The delivery address is Holloman Air Force Base, and shipment must use traceable freight methods—parcel post is prohibited. The contract was issued under solicitation SPE7L4-26-T-5973 with an original required delivery date of August 3, 2026, and is managed by the Department of Defense’s Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7L4-26-T-5974
The contract pertains to the procurement of one bracket, vehicular component, identified by NSN 2590-01-559-1306 and part number 6433083-01M1, to be supplied by BAE Systems Land & Armaments L.P. or AMZ Alabama Inc. Delivery is required within five days of award, with shipment FOB origin and no variance in quantity allowed. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering strictly to DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must follow MIL-STD-129 and RP001, with palletization requirements enforced. The item is prohibited from containing any Class I ozone-depleting chemicals, and any substitute chemicals must be approved unless explicitly authorized by specifications. The delivery destination is in Kaiserslautern, Germany, with the shipment marked for SSA Building 2371 and designated under RDD 999/NMCS procedures. Transportation details reference DLAD PROC NOTE C19 and C20. The contract is tied to solicitation SPE7L4-26-T-5974, with an original required delivery date of August 4, 2026, and all government-specific codes and identifiers are included for administrative and logistical tracking.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336211
New
DIBBS
ANGLE, FENDER REINFO
Solicitation # SPE7L4-26-T-5978
The contract pertains to the procurement of an aluminum angle reinforcement component for fender applications, identified by NSN 2510-00-983-6886 and part number 10911305-2, with a quantity of 73 units. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to the associated technical data is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and have received formal approval from the DLA controlling authority. The purchase request number is 7016286376, with a delivery timeline of 219 days after contract award. The solicitation, issued under contract number SPE7L4-26-T-5978, was posted on August 4, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance delivery slated for New Cumberland, PA, 17070-5002. Primary point of contact for inquiries is Ryan Hammond, reachable via email and phone provided in the contract data.
Motor Vehicle Body Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
PANEL ASSEMBLY, CONSOLE
Solicitation # SPE7L4-26-T-5968
The contract specifies the procurement of one unit of a PANEL ASSEMBLY, CONSOLE with NSN 2540-01-179-8841 and part number L112652, supplied by CNH INDUSTRIAL AMERICA LLC. Delivery is required within five days of contract award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination. The item must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if hazardous per FED-STD-313, packaging must meet TQ requirement IP025, otherwise commercial packaging is permitted. All packaging and labeling must adhere to MIL-STD-129 and palletization must follow RP001. The shipment must be sent via traceable freight methods—parcel post is prohibited—and is to be delivered to the designated military receiving site at Fort Polk, Louisiana, under the RDD/NCMS shipment protocol. The contract references solicitation SPE7L4-26-T-5968, with a required delivery date of August 3, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA. The unit of issue is each (EA) and the total contract value is based on the listed unit price for a single item.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
BAR, LOCKING
Solicitation # SPE7L4-26-T-5969
The contract pertains to the procurement of a single unit of a BAR, LOCKING component identified by NSN 1005-01-188-7858 under solicitation SPE7L4-26-T-5969, with a delivery requirement of five days after award. The item is subject to stringent DLA packaging, technical, and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The component is classified under Category I Munitions List items, triggering strict demilitarization protocols for disposal, and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access accompanying technical data. The contract mandates adherence to configuration change management, qualified products or manufacturers lists where applicable, inspection and acceptance at origin, and removal of government identification from non-accepted items. Measuring and test equipment must comply with specified standards, and all parties must follow DFARS 252.225-7048 for export-controlled technical data handling. The procurement is managed by the Department of Defense’s LSO Combat Vehicles and Armament office, with Paula Chapman as the point of contact, and responses are due by August 17, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336390
New
DIBBS
HOOK, PINTLE
Solicitation # SPE7L4-26-U-1050
This contract is for the procurement of a HOOK PINTLE with NSN 2540-01-558-4395 under solicitation SPE7L4-26-U-1050, issued by the Department of Defense through the Defense Logistics Agency. The item is classified as a critical application component and must conform to precise technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override any other specification unless explicitly authorized. The contract prohibits the use of Class I ozone-depleting chemicals in manufacturing or packaging, requiring any substitute chemicals to be submitted for approval. The item must be delivered FOB origin within 80 days in strict quantities of 135 units, with no tolerance for variance in quantity. Packaging must comply with DLA-specific requirements including MIL-STD-129 for marking and labeling, ASTM D3951 for commercial packaging unless hazardous per Fed-Std-313, in which case TQ requirement IP025 applies, with palletization conforming to RP001. Inspection and acceptance occur at the destination point, and all packaging must reflect the prescribed Unit of Issue and Quantity per Unit Pack (QUP). The procurement is a total small business set-aside under NAICS code 336390, with the estimated unit price at $135.00 per item totaling $18,225.00, though the quantity is considered estimated and subject to modification by the IDC. The contract references the DLA-defined unit of issue system and directs contractors to the official online resource for ANSI X12 conversion. The point of contact is Heather Kessler of the LSO Combat Vehicles and Armament office, with full solicitation details available through the DIBBS system. The solicitation closed on August 19, 2026, with an award expected to follow, and all suppliers must comply with the requirement to remove government identification from non-accepted supplies. The contract does not specify delivery location beyond FOB origin, and all terms are governed by DLA policies with no deviations permitted without formal amendment.
Other Motor Vehicle Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
DIBBS
CLAMP, ELECTRICAL
Solicitation # SPE7L4-26-T-5979
This contract is for the procurement of one electrical clamp, identified by NSN 5999-01-302-4282 and part number 480732, under solicitation SPE7L4-26-T-5979, issued by the Department of Defense through the Logistics Support Activity for Combat Vehicles and Armament. Delivery is required within five days of order placement to Fort Riley, Kansas, with FOB origin terms and zero tolerance for quantity variance. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must adhere strictly to MIL-STD-129 and RP001, with hazardous materials governed by TQ requirement IP025 and non-hazardous items packaged per ASTM D3951 unless superseded by DLA standards. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval. Transportation must utilize traceable freight methods, excluding parcel post, and all shipments must be marked with the provided government routing and freight information. The required delivery date is August 4, 2026, with no flexibility allowed on delivery timeline or quantity, and acceptance occurs at the destination point.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336360
New
DIBBS
TARPAULIN EXTENSION
Solicitation # SPE7L4-26-T-5983
This contract pertains to the procurement of a tarpaulin extension with NSN 2540-01-723-0399, quantity of one unit, to be delivered within ten days of contract award under solicitation SPE7L4-26-T-5983. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting standards including ASTM D3951. Packaging must adhere strictly to DLA’s packaging requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous materials packaged according to TQ requirement IP025 if identified per FED-STD-313. Ozone-depleting chemicals are strictly prohibited in the product or its manufacturing process, and any substitute chemicals must be pre-approved unless explicitly authorized. The unit of issue is each (EA), and palletization must follow DLA guidelines. The destination is W8000V, Prince Sultan Air Base, Saudi Arabia, with shipment logistics governed by DLAD Proc Notes C19 and C20. The required delivery date is July 30, 2026, and the item is intended for U.S. Forces maintenance use. The contract excludes any set-aside provisions and falls under NAICS code 336360 for defense manufacturing.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
PULLEY, GROOVE
Solicitation # SPE7L4-26-T-5980
The contract pertains to the procurement of a single unit of a pulley with a groove, identified by NSN 3020-01-338-4624 and part number SC-108, under solicitation SPE7L4-26-T-5980. Delivery is required within 20 days from the award date, with FOB origin terms, and the item must be delivered to Fort Eustis, Virginia, identified by the shipping address W26RK4, Building 1610, Patch Rd, AWCF SSF. The quantity variance is strictly zero percent, meaning exactly one unit must be supplied. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while adhering to MIL-STD-129 for marking and labeling. DLA’s Master List of Technical and Quality Requirements supersede any conflicting standards, and palletization must meet the specific packaging guidelines outlined in RP001. Shipments must use traceable methods only, excluding parcel post, and are tied to a government tracking number and project code TP 3. The contract specifies the unit of issue as each and the total price for one unit. The required delivery date is July 24, 2026, and the purchase request number is 7017643799. The point of contact is Anna-Rachelle Betts, and inquiries should be directed to her at the provided email and phone. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 333613 for the Department of Defense's Combat Vehicles and Armament division. All technical and quality requirements referenced through R or I numbers in the DLA Master List govern the product’s conformance, and the Government maintains administrative controls for tracking and disposition using the designated DIC, DIST, and ADV codes. The vendor, Columbus Jack Corporation, is expected to fulfill all specifications, packaging, and delivery obligations to avoid rejection or non-compliance.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333613
New
DIBBS
GEAR, WORM WHEEL
Solicitation # SPE7L4-26-T-5982
The contract is for one worm wheel gear, identified by NSN 3020-01-087-5122 and part number 27021-1280, under solicitation SPE7L4-26-T-5982, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. The item must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking code, and the gear must be packaged in a Type 1, 2, or 3, Class B or C, Style 1 bag per MIL-B-117. Delivery is required within 20 days FOB origin with zero variance in quantity, inspected and accepted at destination. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, to the receiving address in Silverdale, Washington, with a required delivery date of July 28, 2026. All shipments must adhere to specified palletization and container instructions, and the point of contact for inquiries is Anna-Rachelle Betts. The contract includes government-only identifiers and project codes for tracking and administrative purposes.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
VALVE, RELAY, AIR PRESSU
Solicitation # SPE7L4-26-T-5984
This contract covers the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a required quantity of three units to be delivered within 20 days of award. The item must strictly conform to the source-controlled drawing specification SPE7L4-26-T-5984 and the referenced technical drawing revision D dated 11/21/2023, with part number 12422042, and is supplied exclusively by WABCO USA LLC under part number 472 195 017 0. Manufacturing requires a metal casting process and compliant tooling, with all components subject to source control and no deviations permitted without formal approval. The contract mandates adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, with special marking code ZZ, palletization compliant with DLA requirements, and shipment via traceable freight only—parcel post is prohibited. Delivery is FOB origin to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The item is classified as a critical application and must not contain ozone-depleting chemicals, mercury or mercury-containing compounds except under strictly defined exceptions, and must comply with all applicable technical and quality requirements referenced in the DLA Master List. All offers require certification of conformance unless waived by a quality assurance letter, and configuration changes must follow formal engineering change proposal procedures. The contract includes restricted data provisions and requires compliance with defense information handling protocols.
Motor Vehicle Brake System Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE7L4-26-T-5971
This contract is for a single cable assembly identified by NSN 5995-01-623-4318, with a delivery requirement of five days after award. The solicitation, issued under number SPE7L4-26-T-5971, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 334419 for other electronic component manufacturing. The contract is administered by the Department of Defense through the LSO Combat Vehicles and Armament office, with performance required at Holloman AFB, New Mexico, 88330-7706. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition size and timing of solicitation amendments. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or another zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0, and unspecified attributes are treated as major unless otherwise stated. Zero non-conformances are required in sample lots unless the contract specifies otherwise. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including employees and subsidiaries, without prior government authorization. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and questionnaire, and been formally approved by DLA. Non-accepted supplies must be stripped of government identification prior to return.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details