Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

Top

BOLT, MACHINE

Active

SPE4A6-26-T-941GFederal

Response Deadline

03/20/2026, 05:00:00 PM UTC

AI Contract Overview

The contract calls for the procurement of two machine bolts identified by NSN/Part Number 5306-01-728-5402, with a required delivery timeline of 20 days after order. It incorporates specific technical and quality requirements as detailed in the DLA Master List, ensuring compliance with the latest applicable standards based on the solicitation or award date. Packaging must adhere to DLA requirements, and any government identification must be removed from supplies that are not accepted. The solicitation number for this procurement is SPE4A6-26-T-941G, issued by the Department of Defense’s ASC Commodities Division under NAICS code 332722, with the place of performance specified as Schofield Barracks, Hawaii. The solicitation was posted on March 12, 2026, and responses are due by March 20, 2026. The primary point of contact for this procurement is Tarik Caballero, reachable via email and phone, with further details accessible through the specified government procurement website. This acquisition is managed as a federal contract to meet Department of Defense supply needs, emphasizing strict adherence to technical and packaging standards to ensure quality and compliance.

General Info

Procure two machine bolts, deliver in 20 days, comply with DLA standards, contract SCPE4A6-26-T-941G.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

View NAICS

Place of Performance

BLDG 1700 LYMAN ROAD, SCHOFIELD BARRACKS, HI, 96857-6048, US

Set-Aside

NONE

Documents(1)

SPE4A6-26-T-941G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedMar 12

Solicitation

Response DeadlineMar 20

Submission deadline

Response Deadline

03/20/2026, 05:00:00 PM UTC

in 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office Address

Contacts

1 contact available

View Contacts

Start a free trial to view contact information.

Start Free Trial

Full Description

BOLT,MACHINE
BOLT,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 5306-01-728-5402 Quantity: 2 EA Purchase Request: 7014873717QTY: 2 Delivery: 20 days ADO

Similar Contracts

NAICS: 332722

New

Federal

BOLT, SHEAR

This contract solicitation seeks offers for 848 units of a shear bolt (NSN 5306-01-056-2949) to be delivered within 121 days to Hill Air Force Base under the Department of Defense's Aviation Supply Chain, specifically under NAICS code 332722. Quotes are encouraged to include quantity ranges due to fluctuating demand, allowing flexibility in combining or reducing quantities without administrative complications. The solicitation prohibits the inclusion of additively manufactured parts unless expressly approved by the contracting officer, and it incorporates strict compliance requirements with domestic sourcing regulations such as the Berry Amendment and the Buy American Act, including a lowered threshold for domestic material restrictions. Offerors must certify that their products do not include covered telecommunications equipment restricted by FAR and DFARS clauses. Additionally, the solicitation emphasizes that Fast Pay terms do not apply, and small business joint ventures must provide relevant certification representations. Changes to the Vendor Shipment Module access will soon require contractor registration through DLA’s AMPS system, with necessary updates to VSM WebServices protocols. The solicitation prioritizes transparency in quoting intentions, requiring “No Bid” submissions with future quote dates if the offeror plans to respond late. Support and assistance for businesses new to government contracting are available through the APEX Accelerators program. The primary contract point of contact is Latoya Anderson, reachable via email or phone for clarifications.

AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days

NUT, SELF-LOCKING, PL

The contract involves the procurement of 131 units of self-locking plate nuts, identified by NSN 5310-01-143-5048, under solicitation number SPE4A6-26-T-941M. These parts must comply with specific technical and quality requirements outlined by the Defense Logistics Agency (DLA), including adherence to referenced drawings and standards such as MIL-STD-1916 and ASTM D3951 for packaging. The contract stipulates zero tolerance on quantity variance, with the delivery scheduled within 62 days FOB origin to DLA Distribution in San Diego, California. Inspection and acceptance will occur at the destination, and all packaging must be marked and labeled according to MIL-STD-129 with strict compliance to configuration and change management protocols. Quality assurance provisions require sampling aligned with military standards, accommodating critical, major, and minor attribute verifications. The contract also includes detailed documentation requirements for source approval and controls over government identification markings on non-accepted supplies. The contractor must manage changes through formal engineering change proposals or requests for variance. This procurement is managed by the Department of Defense, ASC Commodities Division, ensuring strict oversight and conformity to federal acquisition regulations and military quality mandates. The point of contact for clarification is Keasia Granderson at the DLA.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

WASHER, FLAT

This contract solicits the procurement of 30 flat washers under NSN 5310-01-118-0903 with a delivery requirement of 20 days from the award date, FOB origin. The washers are identified as commercial items, and the contract incorporates technical and quality requirements per the DLA Master List, which supersedes ASTM D3951 packaging standards. Packaging and palletization must conform to MIL-STD-129 and DLA-specific packaging requirements to ensure proper labeling and handling. Inspection and acceptance will occur at the destination specified as Joint Base Pearl Harbor, Hawaii, with delivery prepared for shipment to NUWC Division Keyport Submarine Torpedo IMF in Ewa Beach, HI. The solicitation, issued by the Department of Defense’s ASC Commodities Division, is designated under NAICS code 332722 and requires strict adherence to prescribed quality and technical clauses, including measurement and test equipment standards, packaging mandates, and removal of government identification from rejected supplies. Proprietary or insufficient data prevent competitive procurement, indicating the item requires compliance with existing supplier data. The primary point of contact for inquiries is Ashley Jones at the Defense Logistics Agency, and all procurement details, including documentation and amendments, are managed through DLA’s eProcurement portal.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

NUT, SELF-LOCKING, CO

The contract calls for the procurement of 10 self-locking cone seat hexagon nuts under the National Stock Number 5310-01-064-3910, with delivery required within five days. These items are classified as commercial products and must comply with specific Defense Logistics Agency (DLA) technical, quality, and packaging requirements. The contract incorporates several regulatory mandates, including those related to cybersecurity maturity certification, physical identification or bare item marking, and export control of technical data under ITAR and EAR regulations. Inspection and acceptance occur at the origin of shipment, and removal of government identification is required for non-accepted supplies. The contract stipulates that any export-controlled technical data associated with the item is tightly regulated, requiring recipients to have appropriate certifications and training, such as the US/Canada Joint Certification Program and DLA export-controlled technical data training. The purchase is managed under solicitation number SPE4A6-26-T-943R by the ASC Commodities Division of the Department of Defense, with the place of performance being Fort Hood, Texas. The point of contact for further inquiries is Charece Smith, reachable by email and phone. Compliance with the Defense Federal Acquisition Regulation Supplement and related DLA guidelines governs the contractual execution.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

SCREW, CAP, SOCKET HE

This contract is for the procurement of 30 units of a cap socket head screw identified by part number NAS1352C06-5, conforming to specification FF-S-86 and NASM1352 standards with thread class 3A. The screws must meet stringent technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with compliance to MIL-STD-130N for identification marking and MIL-STD-1916 or equivalent sampling methods for quality assurance. The contract prohibits the use of mercury or mercury-containing compounds in the hardware or packaging, aligning with NAVSEA safety standards. Packaging and palletization must comply with DLA packaging guidelines MIL-STD-2073-1E and RP001, and delivery will be made FOB origin to DLA Distribution Anniston, Alabama, with inspection and acceptance at destination. The contract stipulates manufacture according to the current revision of the NAS1352 military part standard, permitting parts made to previous revisions if they were current at the time of manufacture. The required delivery timeframe is 54 days, with a final delivery date set for September 21, 2026. The unit price and total pricing details are specified in the contract, and shipping instructions include contact information for DLA Distribution Anniston transportation officers. The solicitation was posted in March 2026 with a response deadline of March 20, 2026, managed by the Department of Defense's ASC Commodities Division. The procurement process is supported by defined contract data requirements, including certification of quality compliance and adherence to contract quality assurance provisions.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

View Details