Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, MACHINE

Active
SPE4A6-26-T-09QZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a machine bolt identified by NSN 5306001821915 and part number AN3H14, manufactured in accordance with the non-governmental standard NASM3 through NASM20 Revision 5 dated February 28, 2025, and referenced to NASM6812 Revision 4 dated July 31, 2023. The item is classified as a commercial item, and compliance with the current revision of the applicable part standard is mandatory for all hardware produced from the solicitation date forward; previously manufactured hardware conforming to earlier but then-current revisions is also acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control dependent on the acquisition type and dates. Item Unique Identification is not required per the service customer’s request, and identification markings must follow MIL-STD-130N paragraph 4.1.b(2), including manufacturer logos, lot numbers, and material identifications. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking codes applied. Mercury and mercury compounds are strictly prohibited in preservation, packaging, and marking processes. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The shipment quantity is fixed at one unit with zero tolerance for variance, and delivery must occur within twenty days FOB origin to the specified destination in Jackson, Mississippi. Freight must be shipped via traceable means, excluding parcel post, and palletization must comply with DLA packaging requirements. Inspection and acceptance occur at the destination, and all materials must be properly preserved and labeled per prescribed codes. The contract is issued under solicitation SPE4A6-26-T-09QZ with a response deadline of August 3, 2026, and the item is governed by NAICS code 332721 under the Department of Defense’s Commodity Division.

General Info

Procurement of one machine bolt NSN 5306-00-182-1915 by Defense Logistics Agency, response due August 3, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

365 SHOP STREET, JACKSON, MS, 39209-3436, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-09QZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Priscilla Holmes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
SPE4A6-26-T-09QZ
SECTION B
PART STANDARD IN QUESTION.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM3 THRU NASM20 REVISION NR 5 DTD 02/28/2025 PART PIECE NUMBER: AN3H14
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NASM6812 REVISION NR 4 DTD 07/31/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017559909 0001 HD 1.000
NSN/MATERIAL:5306001821915
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BD OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
BULK BREAK POINT:
W35KT9
W8NT MS ARNG AASF 1
365 SHOP STREET
JACKSON MS 39209-3436
US
SPE4A6-26-T-09QZ
SECTION B
PR: 7017559909 PRLI: 0001 CONT’D
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90T24
W8NT MS ARNG AASF 1
365 SHOP STREET
JACKSON MS 39209-3436
US
MARKFOR
W90T24
W8NT MS ARNG AASF 1
365 SHOP STREET
JACKSON MS 39209-3436
US
M/F: (TCN) W90T2451220086
RDD:
PROJ: TP 3
SUPP ADD: W90AUA SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A3A DIST: ADV: FC: KS
Need Ship Date:00/00/0000 Original Required Delivery Date:05/07/2025
SPE4A6-26-T-09QZ NSN/Part Number: 5306-00-182-1915 Quantity: 1 HD Purchase Request: 7017559909QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332721
New
DIBBS
FIXTURE, AIRCRAFT MAThe contract pertains to the procurement of seven aircraft maintenance fixtures identified by NSN 4920-01-531-1242 under solicitation SPE4A5-26-T-309C, with a response deadline of August 3, 2026, and delivery required within 167 days after order. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access the controlled data. Government identification must be removed from non-accepted supplies, and DLA packaging standards apply. Item Unique Identification is waived per the service customer’s request. The place of performance is New Cumberland, Pennsylvania, and all communications must be directed to Hien-Van Trinh of the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Retainer, Packing (NSN 5330-00-812-1214) Manufacturing & SupplyThe contract requires the manufacture and supply of Retainer, Packing components designated by NSN 5330-00-812-1214, adhering strictly to military specifications. Materials used must be UV-protective, waterproof, greaseproof, and opaque to ensure durability and functional reliability under demanding operational conditions. All components must comply with established National Stock Number standards and be packaged in accordance with logistics requirements to support efficient military supply chain handling and distribution. The work is classified as a subcontract under NAICS code 332721, indicating involvement in die and tooling manufacturing, with performance expected to meet Defense Department logistics and quality benchmarks. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026. The contract is managed by the Land Supply Chain under the Department of Defense, and while specific geographic performance locations and points of contact are not provided, all deliverables must align with the standardized military supply protocols governed by the Defense Logistics Agency. The procurement is solicited through the DIBBS platform, and contractors must ensure full compliance with technical, material, and packaging requirements to qualify for award.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332721
New
DIBBS
Precision Machined Component ManufacturingThe contract requires the manufacture of a precision face seal and cover assembly in full compliance with military specifications, technical data packages, and supplier process instructions. Strict configuration control and defense compliance are mandated throughout production to ensure integrity, traceability, and adherence to all applicable defense standards. The work must be executed with exacting quality assurance protocols, and any deviations from approved documentation must be formally controlled and documented. This is a subcontract for a critical defense component, and all manufacturing activities must align with the Department of Defense’s requirements for security, reliability, and performance. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026. The North American Industry Classification System code is 332721, indicating the nature of the work as machine shop services for precision parts. The agency responsible is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, and performance location details are unspecified, implying flexibility within approved defense-contracted facilities. All submissions must be made through the official DIBBS portal, and only qualified suppliers with proven experience in defense-grade machining and configuration management will be considered for award.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machined Mounting Plate ManufacturingThe contract calls for the manufacture of 25 precision mounting plates identified by Part No. 712107-A00 and NSN 5340017350186, encompassing the full manufacturing lifecycle from material sourcing through final inspection and packaging. All work must meet stringent quality standards with machining, finishing, and inspection procedures performed to ensure dimensional accuracy and functional integrity. The plates are to be shipped FOB from the origin location, with delivery addressed to the specified place of performance in New Cumberland, Pennsylvania, 17070-5002. This is a subcontract opportunity under the NAICS code 332721, managed by the Nuclear Reactor Program within the Department of Defense, and responses are due by July 29, 2026, with the solicitation posted on July 24, 2026.
NUCLEAR REACTOR PROGRAM

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of CROSS SLIDE ComponentThe contract calls for the precision manufacture of the CROSS SLIDE component according to engineering drawing NR 53711 8840300, with all work requiring CNC machining, final finishing, and thorough inspection to meet military specifications. The component must be produced to exacting standards ensuring functionality, durability, and compliance with defense-grade quality controls. All manufacturing processes must be documented and validated to demonstrate adherence to the required technical and procedural benchmarks. The solicitation is classified as a subcontract under NAICS code 332721 and is issued by the Department of Defense through the LAND SUPPLY CHAIN organization. Responses are due by August 8, 2026, with the work to be performed at a designated location in N STONINGTON, Connecticut, 06359. The contract is open for bidding through the DIBBS platform, and interested parties must submit proposals by the deadline to be considered for award. There is no set-aside designation specified, meaning the opportunity is open to all qualified subcontractors regardless of business size or classification.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINEThe contract pertains to the procurement of 2,349 machine bolts (12-point flanged) with the NSN 5306011471197, manufactured to the SAE J58 standard, revision dated February 1, 2015, with material specifications of steel grade 5 and cadmium plating per QQ-P-416 Type 2 Class 3, and dimensional requirements of 1/2-13 UNC-3A x 3.000 inches nominal. The item is classified as a commercial item and must conform to all applicable technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with specific clauses including RQ001 for tailored quality requirements, RQ006 for quality conformance inspections, RQ009 for origin inspection and acceptance, and RQ017 for bare item marking per MIL-STD-130N paragraph 4.1.b(2), including manufacturer’s logo, lot number, and material ID. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based acceptance plan, with any unspecified attributes treated as major; MIL-STD-105/ASQ Z1.4 may be used to determine lot size but acceptance requires zero non-conformances unless otherwise contracted. Packaging and labeling are governed by MIL-STD-129 and ASTM D3951, with DLA Master List requirements taking precedence; palletization must adhere to RP001. All items must be marked in compliance with MIL-STD-129 and prepared for delivery in accordance with specified unit of issue and quantity per unit pack. Delivery is required FOB origin with inspection and acceptance also occurring at origin, and full delivery must be completed within 158 days after award, with a need ship date of July 14, 2026 and a final delivery deadline of March 12, 2027. The shipment destination is the DLA Distribution San Joaquin facility in Tracy, California, and invoicing must be submitted via Wide Area WorkFlow. The contract includes stringent compliance clauses related to safeguarding contractor information systems, NIST SP 800-171, and cybersecurity requirements under DFARS deviations. Offerors must be registered in SAM and disclose their UEI and CAGE code, with size status
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332721
New
Federal
Supply of Aerospace Fasteners (Bolts, Pins, Retainers)The contract seeks the supply of precision-machined aerospace fasteners including bolts, pins, retaining rings, and clips certified to military specifications AN, MS, and NAS for use in engine or airframe assemblies within defense systems. The work is classified as a subcontract under NAICS code 332721 and is managed by DLA Aviation under the Department of Defense. Respondents must submit proposals by the deadline of July 31, 2026, with the opportunity posted on July 24, 2026. Performance of the contract is required at a designated location in S Coffeyville, though no further address details are provided. The contract does not specify a set-aside status or point of contact, leaving potential bidders to engage directly through the official SAM.gov portal for full details and submission requirements.
DLA Aviation

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 332721
New
DIBBS
Rod End Connector Supply
LAND SUPPLIER OPNS ENGINES

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Hardware Manufacturing and Retainer FabricationThe contract centers on the precision manufacturing of a retainer component identified by NSN 5330006409717, produced in strict compliance with the military specification MS28782E. This includes all stages of fabrication requiring high-accuracy machining, rigorous material traceability from raw stock to finished part, and comprehensive quality assurance procedures to meet defense-grade standards. The work must be executed to ensure dimensional integrity, surface finish, and functional performance suitable for critical fluid handling applications within military systems. The solicitation is classified as a subcontract under NAICS code 332721, with a response deadline of August 3, 2026, and is issued by the Fluid Handling Division of the Department of Defense. Performance is designated for Jacksonville, Florida, with a ZIP code of 32212-0103. The contract was posted on July 23, 2026, and all submissions must align with the technical and logistical requirements outlined in the military specification, ensuring full compatibility with existing defense supply chains and inspection protocols.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Manufacturing of Sealed Plain Encased Item (NSN 5330014563884)The contract involves the precision manufacturing of 816 military-grade sealed plain encased components with the NSN 5330014563884, requiring strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and MIL-DTL-117 for technical specifications. First Article Testing must be completed on nine units to validate conformance before full production proceeds, ensuring all components meet stringent defense quality and performance benchmarks. The work is to be performed at a designated location in Albany, Georgia with a zip code of 31704-1128, and the contract is classified as a subcontract under NAICS code 332721, indicating it pertains to die manufacturing and related precision machining operations. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and is managed by the Department of Defense under the organization Land Supplier Operations Vehicle Support. Although no specific point of contact or set-aside designation is listed, interested parties must submit proposals through the DIBBS system via the provided link. Compliance with all referenced military standards is mandatory, and failure to meet technical, packaging, or testing requirements will result in rejection. The contract underscores a high-stakes production effort critical to military logistics and equipment readiness.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
SCREEN ASSEMBLY, VALVE – Manufacturing and Assembly Supply
LAND SUPPLIER OPNS ENGINES

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Critical Application FittingThe contract requires the manufacture of 87 precision-machined TEE, TUBE TO BOSS fittings meeting the stringent specifications of SAE AS1039H and AS4841 standards, with Class 3 threads and zero-defect quality assurance for use in defense-grade fluid systems. These fittings are critical components where reliability and precision are non-negotiable, and all units must be produced under rigorous quality control protocols to ensure flawless performance in high-stakes military applications. The work must be completed in full compliance with aerospace and defense industry benchmarks, leaving no tolerance for deviations or defects. The contract is structured as a subcontract under the Department of Defense’s Fluid Handling Division, with performance required at the designated facility in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code 332721 identifies the scope as screw machine product manufacturing, confirming the nature of the precision machining work involved. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. This opportunity is targeted at vendors capable of delivering mission-critical hardware with traceability, documentation, and adherence to defense-specific quality mandates.
FLUID HANDLING DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIALThe contract seeks a special cable assembly identified by NSN 5995-01-727-7502, with a purchase request quantity of ten units, under solicitation number SPE4A6-26-T-09SX issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a limited window for vendor submissions. This action is categorized as a federal solicitation with no specific set-aside classification, meaning it is open to all qualified contractors without restrictions based on business size or ownership. The place of performance and delivery location are not specified, and the point of contact details are omitted, suggesting that further inquiries should be directed through the official DIBBS portal linked in the contract data. This procurement is part of the Department of Defense’s ongoing efforts to secure specialized electrical components for operational use.
Current-Carrying Wiring Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SPACER, BALLThe contract is for 186 spacer, ball components identified by NSN 1440-00-961-5057 under solicitation number SPE4A6-26-T-09RU, issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 26, 2026, and responses are required by August 3, 2026, with no set-aside designation applicable. The procurement is classified as a federal solicitation, and the place of performance and point of contact details are not specified. The full solicitation details and submission interface can be accessed via the DIBBS portal using the provided UI link.
Other Electronic Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 20 units of a hexagon head cap screw, identified by the NSN and part number 5305-01-657-6697, under purchase request 7017539784. This solicitation is issued by the Defense Logistics Agency, a component of the Department of Defense, and is formally designated under solicitation number SPE4A6-26-T-09RJ. The opportunity was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a seven-day window for potential suppliers to submit bids. The contract type is listed as a solicitation with no specified set-aside classification, and the organization type is classified as federal. There are no details provided regarding the place of performance or point of contact, and the solicitation is accessible through the DIBBS platform via the provided link for further submission or inquiry.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 39 machine screws with NSN part number 5305-01-616-2120 under solicitation number SPE4A6-26-T-09SG, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is classified as a federal procurement with no specific set-aside designation. The item is intended for government use and the place of performance and office address information are not specified beyond the United States. Interested parties must submit responses through the designated DIBBS portal prior to the deadline to be considered for award.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details