Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A6-26-T-14PRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 194 machine bolts with NSN 5306-00-069-3019 under solicitation SPE4A6-26-T-14PR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 20 days after award, and the solicitation was posted on August 9, 2026, with responses due by August 17, 2026. The item is procured as fully competitive in accordance with applicable military or federal specifications, and the technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance will occur at the origin, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but individual item unique identification is not mandated per the Service customer’s request, consistent with DFARS 252.211-7003(c)(1)(i). Measuring and test equipment standards must be adhered to, and the NAICS code 332112 designates the industrial classification for this procurement. All inquiries should be directed to Priscilla Holmes at the provided contact information.

General Info

Procurement of 194 machine bolts, delivery in 20 days, competitive, DLA standards, inspection at origin.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14PR for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Priscilla Holmes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 5306-00-069-3019 Quantity: 194 EA Purchase Request: 7017539924QTY: 194 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Copper Alloy Metal Bar SupplyThe contract calls for the supply and delivery of 108 feet of copper alloy 630 metal bar, with a tolerance of plus or minus 10 percent, ensuring the final quantity falls within an acceptable range. The bar must have a diameter of 1.375 inches and be finished using both hot and cold processes to meet the precise requirements of the SAE AMS4640J specification. All materials must be properly packaged and clearly marked in accordance with federal shipping standards to ensure safe and traceable transport. The delivery destination is DLA Distribution in New Cumberland, Pennsylvania, with the zip code 17070-5002 specified as the place of performance. The material is classified under NAICS code 332112, indicating it falls within the forgings and stampings manufacturing sector, and the contract is structured as a subcontract under the Department of Defense, specifically managed by the DDSP NEW CUMBERLAND FACILITY. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing vendors a 11-day window to submit proposals.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Precision Metal Bar Manufacturing – Nickel Alloy 400 Hexagon Bars
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
Manufacture and Delivery of Helical Compression SpringsThe contract requires the precision manufacturing, quality assurance, packaging, and delivery of 58 helical compression springs with the National Stock Number 5360-00-514-4470, fully compliant with military specifications including MIL-STD-2073-1E and all Defense Logistics Agency requirements. The work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and performance under operational conditions typical of defense applications. Packaging must meet stringent military packaging guidelines to safeguard the springs during transit and storage, and delivery must be coordinated to meet the specified timeline and location requirements. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the place of performance designated as Greensboro, North Carolina, 27409. It was posted on August 9, 2026, and responses are due by August 20, 2026. The North American Industry Classification System code 332112 indicates the work falls under spring manufacturing. The solicitation is identified by the reference number SPE7MC26T186M, and all deliverables must be submitted in full compliance with DLA’s procedural and technical directives to ensure acceptance and payment.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2047
This procurement specifies copper alloy bar stock in hexagonal shape with a width of 1.000 inch across flats, manufactured to H04 temper and designated by part number 482, with a reference weight of 3.160 pounds per foot and lengths between 6 and 14 feet, delivered in whole-foot increments only. The material must conform to ASTM B21/B21M-20 and ASTM B249/B249M-23 standards and require a Certificate of Quality Compliance with each shipment, including mill material certification to be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification number and revision, alloy, grade, class, type, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be stamped or stenciled in legible, waterproof, and durable characters that do not contaminate the material, with adhesive labels acceptable for smaller diameter bars. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods following ASTM B900 and marking consistent with MIL-STD-129R, including special designations for unique requirements. The contract enforces strict adherence to the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official DLA Troop Support QSLD to receive awards; deviations must be explicitly declared, and non-compliant bids are subject to rejection and potential criminal penalties. Source inspection requirements are waived for qualified suppliers under this solicitation, relieving them from COQC, PVT, QAP-EQ003, and ASQ H1331 obligations. The product must meet all dimensional, temper, and alloy specifications as defined in the Technical Data Package revisions referencing ASTM and SAE standards. Shipment is to be delivered FOB origin to the designated DLA warehouse in Tracy, California, with a delivery window of 164 days from the original required delivery date of December 5, 2026, and a quantity allowance of plus or minus 10 percent. The contract requires full compliance with all CDRLs including CDRL-METALSCERT, and all documentation must reference the correct NSN 9530001671901 and Purchase Request 701775
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2059
The contract specifies the procurement of Nickel Alloy 400 bars in cold-drawn, stress-relieved condition, with a hexagonal cross-section measuring 0.938 inches across flats and lengths ranging from 6 to 20 feet in whole-foot increments, weighing approximately 2.920 pounds per foot. The material must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements and is subject to qualification under the Qualified Suppliers List for Distributors (QSLD), meaning only suppliers listed on the QSLD are eligible for award; any deviation from this requirement must be explicitly declared. The product must be accompanied by a Certificate of Quality Compliance with each shipment, and continuous identification markings on every unit are mandatory, including the DLA contract number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, durable, and non-contaminating manner. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with special marking and preservation codes Z and ZZ as defined by ASTM A700, and all units must be palletized according to RP001. Continuous identification is required on each bar, and adhesive labels are permitted for items under 0.250 inches in nominal outer diameter. The delivery is FOB origin, with an acceptance point at destination, and a 10% quantity variance is allowed. The required delivery date is November 28, 2026, with a final ship date of February 1, 2027, and the material must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation, including CDRL-METALSCERT, must be submitted, and failure to meet any requirement may result in rejection or criminal penalties for unauthorized substitution.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2065
This contract specifies the procurement of aluminum alloy 2024 in T851 temper, supplied as round drawn bars with a diameter of 6.500 inches and lengths between 10 and 12 feet, delivered in whole-foot increments only, with a reference weight of 38.983 pounds per foot. The material must fully comply with SAE AMS-QQ-A-225/6B and other referenced standards including ASTM B666/B666M-20 and ASTM B660-23, and is designated as a critical application item requiring strict conformance. Each unit must bear continuous identification markings including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer details, heat and lot numbers, and dimensions, applied via stamping or stenciling without contamination or degradation of the material. Adhesive labels are required for small-diameter bars, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including preservation methods per ASTM B660 and marking per MIL-STD-129R with the special code ZZ. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid, and non-compliant bids must explicitly state the deviation. Products delivered under this contract must be sourced exclusively from QSLD-approved distributors unless otherwise authorized in writing by the government; unauthorized substitutions may result in criminal penalties. Certificate of Quality Compliance with mill material certification is mandatory with each shipment and must be forwarded to the DLA Troop Support Contracting Officer. The contract waives source inspection requirements for QSLD-compliant suppliers, except for Foreign Military Sales, and supersedes other quality conformance inspection clauses. Deliveries are FOB origin, with a 20-foot quantity allowable within ±10% variance, inspection and acceptance occurring at destination, and delivery required within 164 days of contract award, with a scheduled need date of February 1, 2027. All shipments must be addressed to DLA Distribution Warner Robins at Robins AFB, Georgia, in compliance with DLA procurement notes and transportation guidelines, and include dual-unit markings if applicable.
WARNER ROBINS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7MC-26-T-186M
The contract pertains to the procurement of 58 helical compression springs identified by NSN 5360-00-514-4470, issued under solicitation SPE7MC-26-T-186M by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and delivery is required within 165 days after award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All supplies must comply with strict prohibitions on mercury and mercury-containing compounds, which cannot be intentionally added or come in direct contact with the hardware, except for specific approved uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies, and performance is to occur in Greensboro, North Carolina, with primary point of contact Nicole Betts reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-5116
The contract pertains to the procurement of three air filter elements with NSN 4130-01-560-6308 and part number CC-3000-CVN-77, supplied by EDDY PUMP CORPORATION under solicitation SPE8E8-26-T-5116. Delivery is required within 20 days of award, FOB destination, with no tolerance for quantity variance. The items must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951, and must be packaged per MIL-STD-129 and RP001 packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems, with portable mercury-containing devices requiring shockproof design and dual containment per NAVSEA 5100-003D. Packaging must mark and label in accordance with DLA standards using the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere to DLA procurement protocols. Shipment must bypass parcel post and use the fastest traceable transport method to the vessel delivery address for USS SAN DIEGO LPD 22, with tracking reference RDD 777 and transporter details provided. The required delivery date is April 17, 2025, and the contract mandates strict adherence to defense information handling protocols and government-only access codes.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3404
This contract specifications call for nickel alloy 400 metal bars, cold drawn and shaped in a hexagon with a width of 0.750 inches across flats, offered in whole-foot lengths ranging from 6 to 20 feet, with a linear weight of 1.870 pounds per foot. The material must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including the applicable specification SPE8E9-26-T-3404, Section B, and must be accompanied by a Certificate of Quality Compliance with every shipment, submitted both to the receiving depot and to the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and dimensions, using approved methods such as stenciling or stamping that do not contaminate or impair the product. Adhesive labels are required for bars under 0.250 inches in nominal diameter, and tags are acceptable for wire, with noncompliance constituting grounds for rejection. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation from this requirement must be explicitly declared. The government waives source inspection requirements for QSL-compliant suppliers, eliminating the need for COQC, PVT, QAP-EQ003, and ASQ H1331 inspections. Packaging must adhere to MIL-STD-2073-1E and RP001, with preservation methods following ASTM A700 and marking requirements complying with MIL-STD-129, including the use of special codes Z and ZZ for preservation and labeling. Vinyl or plastic-coated pressure-sensitive labels are permitted for structural shapes and banded lifts, and shipment markings must display both units of measure if applicable. The contract is for 37 feet of material at $37.00 per foot, with a total price of $1,369, delivery FOB origin, inspection and acceptance at destination, and a required delivery date of February 1, 2027, with a 10 percent quantity variance allowed. The material is designated as a critical application item, and all documentation including the Technical Data Package and CDRL-METALSCERT must be furnished in accordance with referenced standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-398X
The contract is for the procurement of 198 electrical cable clamps identified by NSN 5935-01-103-5835 under solicitation SPE7M5-26-T-398X, issued by the Department of Defense’s Active Devices Division. The item must be delivered within 105 days of award, with performance taking place in New Cumberland, Pennsylvania. All pricing must include data required by the DLA packaging requirements, and suppliers are obligated to provide one Certificate of Quality Compliance per manufacturing lot, aligned with the Supplemental Quality Assurance Provision. Each certificate must accompany the shipment and be made available for Government inspection at the time of delivery if the contract is under Government inspection at source. Suppliers must electronically upload each COQC into the iRAPT system as an attachment to the Receiving Report for Government records, and the Government representative may approve the receiving report via WAWF once documentation is properly submitted and verified. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 332112, and primary point of contact is Tate Shannon at the provided DLA email and phone number.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M5-26-T-398W
The contract is for the procurement of 195 electrical plug connectors with NSN/Part Number 5935-01-008-2404, issued under solicitation SPE7M5-26-T-398W by the Department of Defense’s Active Devices Division. All items must be manufactured by an approved source using materials explicitly cited on the referenced drawing, and quotes must strictly adhere to these specifications. The delivery timeline requires fulfillment within 137 days after award, with performance to occur at Robins AFB, Georgia. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition size and timing of solicitation amendments. Packaging must comply with DLA standards, and all government identification must be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in any part of the product or manufacturing process, and any substitute chemicals require prior approval unless already authorized by the specification. Any configuration changes or deviations require an engineering change proposal or formal variance request. Point of contact for inquiries is Corey Carter at corey.carter@dla.mil or 614-693-0310.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-14MN
The contract pertains to the procurement of 50 machine screws with part number BACS12CK3-10 and NSN 5305-01-051-0624, sourced from approved suppliers including Valley-Todeco Inc, SPS Technologies LLC, Howmet Global Fastening Systems Inc, Federal Manufacturing Corp, and Boeing Defence Australia Ltd. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, which supersede all other standards unless otherwise stipulated. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. Configuration changes require formal engineering change proposals and variance requests. All items must be packaged per ASTM D3951 and labeled per MIL-STD-129 in accordance with DLA Packaging Requirements, with palletization governed by RP001. The unit of issue is each (EA), with no tolerance for quantity variance, and delivery is FOB origin. Inspection and acceptance occur at destination. The required delivery date is March 15, 2027, with a delivery window of 166 days from the contract award. The procurement is managed under solicitation SPE4A6-26-T-14MN, issued by the Department of Defense, with primary point of contact Sibel Claywell. Shipping instructions and transport protocols must adhere to DLAD Proc Notes C19 and C20, with delivery directed to the DLA Distribution Depot in Tinker AFB, Oklahoma.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details