BOLT, MACHINE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPE4A6-27-T-6850 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of two machine bolts, part number BACB30LJ4H5 (NSN 5306-01-654-4990). This item is designated as a critical application item and requires Federal Aviation Administration airworthiness approval. The procurement is not a small business set-aside and falls under NAICS code 332722. Delivery is required within 21 days after the order, with a need ship date of October 22, 2026, and a final required delivery date of November 28, 2026. The items are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Technical compliance is governed by TDP Rev A Gen 1 and Reference QAP 13873, with quality requirements necessitating an inspection system that complies with ISO 9001:2015 or an equivalent standard. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with acceptance requiring zero non-conformances. Packaging and marking must adhere to MIL-STD-129, RP001, and RP003 for FAA commercial material. The contract incorporates several key federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System, and payment processing will be handled through the Wide Area WorkFlow system.
General Info
Place of Performance
3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USASet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
BOLT,MACHINE
REFER TO PROC NOTE L32 FOR HIGHER LEVEL QUALITY REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ046: FAA Bare Item Marking Requirements RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
SPE4A6-27-T-6850
SECTION B
HOWMET GLOBAL FASTENING SYSTEMS INC 1RC86 P/N BACB30LJ4H5
SPS TECHNOLOGIES, LLC 06725 P/N BACB30LJ4H5
THE BOEING COMPANY 81205 P/N BACB30LJ4H5
FEDERAL MANUFACTURING CORP 17943 P/N BACB30LJ4H5
SPS TECHNOLOGIES LLC 27624 P/N BACB30LJ4H5
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018835481 0001 EA 2.000
NSN/MATERIAL:5306016544990
DELIVERY (IN DAYS):0021
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A6-27-T-6850
SECTION B
PR: 7018835481 PRLI: 0001 CONT’D
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:10/22/2026 Original Required Delivery Date:11/28/2026
SPE4A6-27-T-6850 NSN/Part Number: 5306-01-654-4990 Quantity: 2 EA Purchase Request: 7018835481QTY: 2 Delivery: 21 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Same awarding agency
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS