Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A6-26-T-21TQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of four machine bolts, identified by NSN 5306013605366 and part number AN8C57. The items must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing NASM3 through NASM20 and NASM6812. Delivery is required within 20 days after receipt of the order, with a final required delivery date of July 30, 2026. The shipment is to be delivered FOB Origin to Homestead AFB, Florida, using the fastest traceable means. Quality and technical compliance are governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging, physical identification, and the removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must comply with RP001 requirements. Identification marking must follow MIL-STD-130N.

General Info

Procurement of four machine bolts for delivery to Homestead AFB by July 30, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

29200 WESTOVER ST, HOMESTEAD AFB, FL, 33039-0001, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-21TQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
DUANE WATKINS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
TDP Rev C Gen 3 IAW BASIC NON GOVT STD NASM3 THRU NASM20 REVISION NR 5 DTD 02/28/2025 PART PIECE NUMBER: AN8C57
TDP Rev C Gen 3
SPE4A6-26-T-21TQ
SECTION B
IAW REFERENCE NON GOVT STD NASM6812
REVISION NR 4 DTD 07/31/2023
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722021 0001 EA 4.000
NSN/MATERIAL:5306013605366
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6648
FB6648 482 LRS LGR
CP 786-415-6592
29200 WESTOVER ST
HOMESTEAD AFB FL 33039-0001
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6648
FB6648 482 LRS LGR
CP 786-415-6592
29200 WESTOVER ST
HOMESTEAD AFB FL 33039
US
SPE4A6-26-T-21TQ
SECTION B
PR: 7017722021 PRLI: 0001 CONT’D
M/F: (TCN) FB66486208B010
RDD: 777
PROJ: TP 2
SUPP ADD: YBZ460 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE4A6-26-T-21TQ NSN/Part Number: 5306-01-360-5366 Quantity: 4 EA Purchase Request: 7017722021QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-439A
This contract is a solicitation for the procurement of 16 units of a receptacle connector, identified by NSN 5935-01-085-5801 and part number MS3449H10C6P. The item is designated as a critical application item and must comply with MIL-DTL-26482J(2) and MS3449E specifications. As a qualified item, it must adhere to the Qualified Products List (QPL) for connector assemblies and electrical contacts. The use of Class I ozone-depleting substances in the design or manufacturing process is strictly prohibited without written approval from the contracting officer. The delivery is required within 20 days, with the original required delivery date set for November 26, 2025. Shipping is FOB Origin, and the final destination is the Government of Israel Ministry of Defense. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129. This procurement is open to full and open competition and is managed by the Department of Defense Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2047
The contract specifies the procurement of copper alloy bars with a hexagonal cross-section measuring 1.000 inch across flats, in H04 temper, with lengths between 6 and 14 feet and a reference weight of 3.160 pounds per foot. The material must conform to ASTM B21/B21M-20 Revision 20 and other referenced technical standards including SAE AMS-STD-185A, ASTM B249/B249M-23, and ASTM B900-16 (R2022). Compliance is governed by a comprehensive set of technical and quality requirements from the DLA Master List, with specific clauses requiring continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Marking must be done via stamping or stenciling, be legible to the unaided eye, waterproof, and non-contaminating, with adhesive labels required for bars, tubes, or shapes under 0.250 inches nominal OD and tags for wire. Packaging must adhere to MIL-STD-2073-1E and preservation requirements in accordance with ASTM B900, using method code 10 CLNG/DRY:1, with markings compliant with MIL-STD-129R(3) and requiring barcoding per DoD logistics standards. The material must be delivered in whole-foot increments and shipped FOB origin to Tracy, CA, with a delivery window of 164 days after order receipt, and a 10% quantity variance allowed. The solicitation uniquely enforces the Qualified Suppliers List for Distributors (QSLD) requirement under DLA Troop Support June 1994, mandating that only suppliers listed on the QSLD are eligible for award; offers based on non-QSLD suppliers must explicitly state the deviation and are subject to rejection or criminal penalties if falsely represented. For approved QSLD suppliers, standard quality inspections such as QAP-EQ003, ASQ H1331, and RQ006 are waived, and a Certificate of Quality Compliance (mill-material certification) must accompany each shipment, with a copy furnished to the DLA Troop Support Contracting Officer. The contract incorporates multiple safeguarding and compliance clauses, including 25
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A5-26-T-385W
This contract is for the procurement of five helical compression springs, identified by NSN 5360011727151 and Parker Hannifin Corp part number D1-154-1. The item is designated as a critical application item. Delivery is required within 10 days, with the original required delivery date set for August 10, 2026. The shipment is to be delivered FOB Origin and sent via the fastest traceable means to the Aviation Maintenance Center at Fort Rucker, Alabama. The supplier must adhere to several DLA technical and quality requirements, including specific standards for source approval, packaging, bare item marking, and the use of measuring and test equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CLAMP, CABLE, ELECTRI
Solicitation # SPE7M5-26-T-398X
The contract calls for the procurement of 198 electrical cable clamps identified by NSN 5935-01-103-5835, with delivery required 105 days after award, targeting a need ship date of December 4, 2026, and an original required delivery date of November 10, 2026. The item is classified as a critical application item and must conform strictly to Basic Drawing NR 19207 11672272 Revision A dated August 7, 1996, and TDP Rev A Gen 3, with no use of Class I ozone-depleting substances permitted in any phase of design, manufacturing, or testing without explicit written approval. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively, with specific parameters including QUP 001, PRES MTHD 31, CLNG/DRY 1, UNIT CONT D3, and PACK CODE U, and palletization must follow RP001 DLA Packaging Requirements. Hazardous materials must be labeled in compliance with 29 CFR 1910.1200, and radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries per item must be marked per MIL-STD-129. The supplier must submit a Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared per the Supplemental Quality Assurance Provision, and upload an electronic copy to iRAPT, while maintaining a physical copy available for government inspection at source if applicable. Delivery is to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania under FOB Origin terms, and payment processing must occur through the WAWF system with receiving reports linked to the Production CLIN. Offers must not include items produced using additive manufacturing, and suppliers are required to hold an approved JCP certification and submit a Safety Data Sheet prior to award to be considered eligible. Offerors must also validate their current representations in SAM, including small business status and potential involvement in small business joint ventures, and confirm compliance with Buy American provisions. All quotations must be submitted via DIBBS by August 20, 2026, and this solicitation may be subject to automated award based on compliance with all requirements.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-21VT
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of one hexagon head cap screw under National Stock Number 5305-01-368-7319. The contract requires delivery within 146 days after the order is placed and is categorized under NAICS code 332112. The place of performance is located in New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and quality conformance inspections. Notably, the contract involves covered defense information and technical data subject to ITAR and EAR export controls. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E9-26-T-3572
This contract is for the procurement of 36 feet of structural aluminum alloy angle, identified by NSN 9540002363967 and part number AMS10134-2405. The material must be supplied in whole feet lengths between 10 and 12 feet, adhering to SAE AMS10134-2405 and other specified technical standards. A Certificate of Quality Compliance is mandatory for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Strict marking requirements are in place, requiring continuous identification including the contract delivery order number, NSN, specification number, grade, alloy, manufacturer details, and dimensions via stamping or stenciling. Packaging and preservation must comply with MIL-STD-129 and ASTM B660/B666 standards, with delivery destined for the DLA Distribution Depot Oklahoma at Tinker AFB.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-15ZF
Solicitation SPE4A6-26-T-15ZF is a request for quotations issued by the Department of Defense, ASC Commodities Division, for the procurement of 410 machine screws under NSN 5305008911775. The items must conform to technical data package revision B, general 2, and basic non-government standard NASM27039 revision 6. This is a critical application item requiring adherence to quality assurance plan EQ003 and specific sampling methods per MIL-STD-1916 or ASQ H1331. The delivery is required within 210 days after the date of order, with a need ship date of March 19, 2027, and a final required delivery date of April 11, 2027. The contract specifies FOB Origin terms with inspection and acceptance occurring at the destination, specifically DLA Distribution Jacksonville, Florida. Packaging must comply with MIL-STD-2073-1E and RP001, while marking and labeling must follow MIL-STD-129 and RQ017 for bare item marking. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including NIST SP 800-171 for safeguarding covered defense information. Quotations were requested via the DLA Internet Bid Board System with a submission deadline of August 20, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332112
New
DIBBS
FILTER ELEMENT, AIR
Solicitation # SPE8E8-26-T-5097
This contract, identified as SPE8E8-26-T-5097, is for the procurement of 59 air filter elements under NSN 4130-01-568-9101. The order is managed by DLA Distribution San Joaquin, with delivery and acceptance points set at the destination in Tracy, California. The required delivery date is November 23, 2025, with a delivery window of 126 days. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, and requires packaging in accordance with ASTM D3951. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific prohibitions against the intentional addition of mercury or mercury-containing compounds to the hardware. Shipping is designated as FOB Origin.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-21ZZ
This contract is for the procurement of 721 machine bolts under NSN 5306013696095. The order specifies a delivery timeframe of 101 days with a required delivery date of April 23, 2027. Shipping is FOB Origin, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The supplier must adhere to strict technical and quality requirements, including physical identification, DLA packaging standards, and the provision of a certificate of conformance. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is required. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and mandates sampling methods in accordance with MIL-STD-1916 or ASQ H1331.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-21YS
This contract is for the procurement of 92 machine bolts, identified by NSN 5306010097106 and part number MS9490-15. The items are designated as critical application hardware and must adhere to SAE AS9490B Revision B and QAP 13873 standards. Delivery is required within 163 days, with a need ship date of February 12, 2027, shipping FOB Origin to DLA Distribution San Diego. The agreement mandates strict quality and technical compliance, including physical identification, bare item marking, and adherence to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, and the contractor must provide a Certificate of Quality Compliance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. All marking and palletization must comply with MIL-STD-129 and RP001 guidelines.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-21XA
This contract is for the procurement of 1,405 machine bolts under solicitation SPE4A6-26-T-21XA for the Department of Defense. The items must adhere to specific technical standards, including NASM3 through NASM20 and NASM6812, and are designated as critical application items. Delivery is required within 163 days, with a need ship date of February 12, 2027, and a final required delivery date of April 12, 2027. The shipment is destined for DLA Distribution Cherry Point in North Carolina. Quality assurance is stringent, requiring inspection and acceptance at the origin using sampling methods based on MIL-STD-1916 or ASQ H1331. Marking must comply with MIL-STD-130N and MIL-STD-129, while packaging must follow MIL-STD-2073-1E and DLA packaging requirements. Notably, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-21LP
This contract is for the procurement of machine bolts under solicitation SPE4A6-26-T-21LP for the Department of Defense. The requirement consists of two line items for NSN 5306014194099, with a total quantity of 7 units. The items must adhere to basic non-government standard B18.2.3.1M Revision D and are designated as critical application items. Delivery is required within 167 days, with a need ship date of February 12, 2027, and an original required delivery date of August 14, 2027. The contract specifies that inspection and acceptance will occur at the origin, with FOB origin delivery. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Shipments are destined for DLA Distribution facilities in New Cumberland, Pennsylvania, and Albany, Georgia.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15WU
Solicitation SPE4A6-26-T-15WU, issued by the DLA Aviation ASC Commodities Division, is a request for 1,477 threaded pin-rivets under NSN 5320014527666. This critical application item is identified as a commercial off-the-shelf product and requires a manufacturer Certificate of Compliance conforming to DI-MISC-81356, along with documentation substantiating traceability to the certified lot. Due to the nature of the item, casting or forging may be required, and offerors are directed to authorized manufacturers or the DLA Casting and Forging Assistance Request process for sourcing and tooling information. The contract specifies a delivery window of 100 days after receipt of order, with a need ship date of November 29, 2026, and a required delivery date of January 3, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and compliance with the Berry Amendment and Buy American Act.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-T-16DP
Solicitation SPE4A6-26-T-16DP is a request for quotations issued by the Department of Defense ASC Commodities Division for the procurement of 1,152 units of Stud Assembly, Turnlock Fasteners (NSN 5325011695657). The requirement is for a critical application item with a delivery schedule of 112 days after receipt of order, with an original required delivery date of August 12, 2026. Delivery is specified as FOB Origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging via ASTM D3951 and RP001, and marking per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance at the destination point. Security and compliance obligations include CMMC Level 2 self-assessment, safeguarding of covered defense information, and adherence to OSHA hazard communication standards. All submissions must be processed electronically through the DLA Internet Bid Board System (DIBBS), and post-award invoicing must be conducted via the Wide Area WorkFlow (WAWF) system.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21SZ
This solicitation is for the procurement of 10 headless shoulder pins under contract number SPE4A6-26-T-21SZ for the Department of Defense ASC Commodities Division. The delivery requirement is 20 days after receipt of order, with the place of performance located in Keyport. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with sampling methods adhering to MIL-STD-1916 or ASQ H1331. The contract includes strict security and regulatory compliance mandates, including CMMC Level 2 certification and the protection of covered defense information. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-21UR
This contract is a solicitation for the procurement of four units of a closing assembly handle for a nose landing gear kneeling door, identified by NSN/Part Number 0001S00000052. Issued by the Department of Defense ASC Commodities Division, the contract requires delivery within 590 days after receipt of order. Performance is centered at Robins Air Force Base, and the procurement falls under NAICS code 336413. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, physical identification, and bare item marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling generally required. Additionally, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training to access technical data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-15WY
Solicitation SPE4A6-26-T-15WY is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 890 units of Collar, Pin-Rivet (NSN 5320016230156). This critical application item must be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB, with a required delivery date of March 7, 2027, and a lead time of 197 days after receipt of order. The procurement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105, with an expected award basis of Lowest Price Technically Acceptable. The contract mandates strict adherence to quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging according to ASTM D3951 and RP001. Marking and labeling must comply with MIL-STD-129, and physical identification is required per RQ017. Key regulatory requirements include DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.223-7001 for hazardous material warning labels. Inspection and acceptance will occur at the destination. All quotations must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 25, 2026.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-21WN
Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
GAGE ROD, LIQUID LEV
Solicitation # SPE4A6-26-T-21UD
This contract is for the procurement of five liquid level gage rods, identified by NSN 6680017223486 and part number 100893 from American Metal Bearing Co. Each of the five line items consists of one unit to be delivered to different naval vessels, including the USS Chung Hoon, USS Gravely, USS Jack H. Lucas, USS Daniel Inouye, and USS Mustin. The required delivery dates range from August 4 to August 18, 2026, with a delivery timeframe of 20 days. The terms specify FOB Destination for all shipments, with inspection and acceptance also occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. All shipments must follow DLA packaging requirements and be sent via the fastest traceable means where specified.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21YC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 12 sleeve bushings under NSN 3120-01-491-2867. The contract requires delivery within 158 days after the order is placed and is categorized under NAICS code 332991. The place of performance is located in New Cumberland, Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment organizations and specific DLA packaging and marking standards. Notably, the item is subject to stringent export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data. Inspection and acceptance will occur at the origin.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-21KY
This contract is for the procurement of electrical contact brushes, specifically part number SRP-L-11-STR from Shaft Current Solutions, Inc., under NSN 5977015183353. The agreement consists of three line items totaling 34 units, distributed across different delivery locations including Sasebo Japan, the USS Zumwalt, and the USS Lyndon B. Johnson. Delivery is required within five days, with required delivery dates ranging from March to August 2026. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, packaging, and marking processes, except for specific functional exceptions.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
BALL SET, BEARING
Solicitation # SPE4A6-26-T-21ZK
This contract is a solicitation for 105 units of a bearing ball set, identified as a commercial off the shelf critical application item with NSN 3110-01-481-9923 and RTX Corporation part number 4950825. The delivery timeline is set for 163 days after the order, with FOB, inspection, and acceptance all occurring at the origin. A primary requirement of this agreement is strict adherence to domestic sourcing restrictions. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract mandates specific packaging and preservation standards according to MIL-STD-2073-1E and MIL-DTL-197M, explicitly prohibiting the use of mercury or mercury compounds.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-21XM
This solicitation is for the procurement of 13 annular ball bearings, part number 2553379, under solicitation number SPE4A6-26-T-21XM. The requirements specify that the bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Acceptable sources include The Barden Corporation and New Hampshire Ball Bearings Inc. Technical specifications include a raceway surface finish not exceeding 2 micro-inch AA and the use of lube/oil L01 per MIL-PRF-6085D. The contract mandates strict adherence to DLA packaging, marking, and quality requirements, including MIL-STD-129 and MIL-DTL-197M. The items are subject to a 12-month extendable shelf life and require a contractor declaration regarding the domestic or foreign nature of the materials. Delivery is required within five days after order, with inspection and acceptance occurring at the destination. Cybersecurity compliance via CMMC Level 2 self-assessment and adherence to covered defense information regulations are also required.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21VJ
This contract is for the procurement of 18 sleeve bushings, identified by NSN 3120-01-354-0277 and part number 4-195-9-00215 from Grove U.S. LLC. The solicitation, numbered SPE4A6-26-T-21VJ, is issued by the Department of Defense ASC Commodities Division. Delivery is required within 165 days after order, with a need ship date of February 14, 2027, and an original required delivery date of July 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details