Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A0-26-T-4160Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one machine bolt with NSN 5306-01-533-8062, sourced under solicitation SPE4A0-26-T-4160, with a required delivery date of July 30, 2026, and a five-day delivery window from the origin point. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be packaged and labeled per MIL-STD-129, with palletization aligned to DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance permitted in quantity, and inspection and acceptance occur at the destination. The delivery is FOB origin and must be shipped by the fastest traceable means, excluding parcel post, to the Central Receiving Point at Fort Carson, Colorado, with the freight and mark-for addresses matching the receiving location. The shipment must reference RDD 999/NMCS and include the tracking control number W91FPV62080033. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract, and government identification must be removed from any non-accepted supplies. The contract is issued by the Department of Defense through the Aviation Supply Chain E-SOC Buys office, with Danita Davis as the primary point of contact.

General Info

Procure one NSN 5306-01-533-8062 bolt, deliver by July 30, 2026, FOB origin, per MIL-STD-129 and DLA standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

4885 CHILES AVE, FORT CARSON, CO, 80913-4093, US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4160.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
KUBOTA ENGINE AMERICA CORP 1Q0C4 P/N 01754-50875
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688416 0001 EA 1.000
NSN/MATERIAL:5306015338062
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A0-26-T-4160
SECTION B
PR: 7017688416 PRLI: 0001 CONT’D
BULK BREAK POINT:
W51HUN
W6YQ USALRCTR FT CARSON
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
RDD 999/NMCS SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91FPV
W6YQ USALRCTR FT CARSON
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
MARKFOR
W91FPV
W6YQ USALRCTR FT CARSON
MF CENTRAL RECEIVING POINT BLDG 330
4885 CHILES AVE
FORT CARSON CO 80913-4093
US
M/F: (TCN) W91FPV62080033
RDD: 999
PROJ: 0D1 TP 1
SUPP ADD: W81RP6 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:07/30/2026
SPE4A0-26-T-4160 NSN/Part Number: 5306-01-533-8062 Quantity: 1 EA Purchase Request: 7017688416QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)The contract requires the manufacture, packaging, and delivery of a Critical Safety Item designated as Lot/Item 5306-011653304 under military specifications, with strict adherence to traceability protocols and predefined CLIN quantities. All work must meet stringent quality and compliance standards expected for defense-critical components, ensuring the item's reliability and safety in operational use. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a response deadline of September 4, 2026, and a NAICS code of 332722 indicating the scope falls within secondary metal manufacturing. Performance location details are not specified, but the delivery must align with Air Force requirements for logistics and acceptance. The solicitation was posted on August 4, 2026, and all participants must comply with traceability, documentation, and inspection criteria mandated for military-grade safety items.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11RS
The contract specifies the procurement of 9 units of a socket head cap screw, self-locking, identified by NSN 5305007214734 and part number NAS1190E04P12N, with a unit price of $9.00 and a total price of $81.00. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, under FOB origin terms, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers, and marking per MIL-STD-129 with no special marking required. The hardware must conform to the current revision of the National Aerospace Standard, with previously applicable revisions accepted for prior production but not for new manufacturing post-solicitation. All items must adhere to strict technical and quality requirements referenced through the DLA Master List, including sampling protocols per MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specified verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in the product and its packaging except for limited functional uses as defined, and all packaging materials must also be mercury-free. A Certificate of Quality Compliance is required, and identification marking must follow MIL-STD-130N unless otherwise specified. The contract includes all applicable CDRLs and is governed by DoD procurement standards, with the solicitation issued under SPE4A6-26-T-11RS and a response deadline of August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BARREL
Solicitation # SPE4A6-26-T-11YC
The contract is for the procurement of 1,170 plain barrel nuts with NSN 5310-01-213-7628 under solicitation SPE4A6-26-T-11YC, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, with responses due by August 12, 2026. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and applying equally to U.S. companies and their foreign subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The contract also requires adherence to DLA packaging standards, CMMC Level 2 certification for third-party assessors, physical item marking specifications, configuration change management through Engineering Change Proposals, and any approved variances. The place of performance is New Cumberland, Pennsylvania, with primary point of contact Ashley Jones-Turner.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11QZ
The contract pertains to the procurement of 523 retaining rings with NSN 5325-00-558-6947 under solicitation SPE4A6-26-T-11QZ, issued by the Department of Defense’s ASC Commodities Division. The requirement is fully competitive and governed by military or federal specifications, with delivery due within 49 days of award to Cherry Point, North Carolina, at ZIP code 28533-5040. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition type. The item is designated as critical, triggering the need for origin inspection and adherence to stringent packaging, marking, and identification standards including physical bare item marking and removal of government identification from non-accepted supplies. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and covered defense information provisions may be applicable. The point of contact for inquiries is Marchello Fields, reachable via phone or email provided in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12FT
The contract specifies the procurement of a PIN-RIVET component designated as P/N HL413V-6-4, compliant with stringent military and aerospace standards including MIL-STD-130 for part marking, ASME Y14.5 for dimensions and tolerances, and ASME B46.1 for surface texture. Threads must conform to SAE AS8879, and lubrication is required per MIL-L-87132 Type I or III, with Cetyl Alcohol as an optional alternative to HI-SHEAR Spec 305. The part is subject to configuration management and documentation requirements tied to the DLA Master List of Technical and Quality Requirements, with specific controls for sourcing approval, packaging, and deviation requests. The item is classified as a Critical Application Item and must be marked per RQ017 with Government Identification retained unless non-accepted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are verified at strict levels VII, IV, and II. The contract mandates packaging in accordance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements RP001. Delivery is FOB Origin, with inspection and acceptance points at destination, and no quantity variance permitted. The required delivery date is January 31, 2027, with a 171-day lead time, and the item is to be shipped to DLA Distribution Depot Oklahoma at Tinker AFB. The Solicitation Number is SPE4A6-26-T-12FT, with 42 units priced at $42.00 each, totaling $1,764. The NSN is 5320-01-707-8438, and the award is open to approved suppliers including HI-SHEAR CORPORATION, SPS TECHNOLOGIES, LLC, WEST COAST AEROSPACE, INC., and HOWMET GLOBAL FASTENING SYSTEMS INC. All requirements are governed by federal acquisition protocols under the Department of Defense, with point of contact Paul Askew at DLA Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSI
Solicitation # SPE4A6-26-T-12JU
The contract pertains to the procurement of a washer, spring tension, identified by NSN 5310-01-678-4038 and part number 9714K112, with a single unit requirement of one packing group. Delivery is required within 20 days to the destination specified as the Field Maintenance Shop in Johnston, Iowa, under FOB Origin terms with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including unit packaging marked per MIL-STD-129 without special marking codes, and palletization must adhere to DLA packaging regulations. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or an equivalent zero-based method, and non-conformances must be zero unless otherwise specified. The item must be shipped by the fastest traceable method excluding parcel post, with shipments tracked under RDD 777. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and covered defense information may apply. The contract was issued under solicitation SPE4A6-26-T-12JU with a required delivery date of July 29, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-12EV
The contract pertains to the procurement of 64 units of a socket head cap screw, identified by NSN 5305-01-720-1042 and part number M1222SN5C320NCLN, manufactured to meet MIL-DTL-1222J specification. All supplies must comply with stringent technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The item is designated as a critical application component, and strict prohibition is in place against intentional incorporation or direct contact of mercury or mercury-containing compounds, except for limited exceptions such as batteries, fluorescent lamps, sensors, and chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise stated. Delivery is FOB origin with a 171-day lead time, final delivery due by January 31, 2027, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must adhere to DLA packaging requirements and prohibits mercury in preservation, packing, or marking. The unit of issue is each, quantity is fixed with zero variance, and the point of contact is Bernice Adams at DLA.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A0-26-T-4161
The contract specifies the procurement of 4 units of a socket head cap screw with NSN 5305-99-595-2472, to be delivered within five days to Fort Bragg, North Carolina, FOB origin, with no tolerance for quantity variance. All items must comply with DLA’s packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, using packaging code U and no special marking. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances unless otherwise stated. Technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List, with revisions tied to the solicitation or award date depending on acquisition size. The shipment must be transported via traceable freight methods, excluding parcel post, and is identified with RDD code N and project code TP 1 under government-controlled logistics identifiers. The contract is issued under solicitation SPE4A0-26-T-4161, with a required delivery date of July 30, 2026, and points to official DLA resources for unit of issue alignment and quality compliance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332216
New
DIBBS
WRENCH
Solicitation # SPE4A0-26-T-4164
This contract, identified by solicitation number SPE4A0-26-T-4164, pertains to the procurement of one wrench with NSN 5120-01-188-7380, to be delivered within five days from the contract award date, FOB origin. All technical and quality requirements referenced in this agreement are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition scale. The item must comply with stringent packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special markings required. Sampling for inspection must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively, and zero non-conformances accepted unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in or on the hardware unless used functionally in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments containing mercury requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is designated as a Critical Application Item with specific identification and marking requirements for Northrop Grumman Systems Corporation, part number 1665C30H01. Measurement and test equipment used in production must meet RT001 standards, and all supplies must be physically marked per RQ017. The delivery address and ship-to location is in Fort Worth, Texas, and the shipment must be sent via fast, traceable freight, excluding parcel post. The contract includes government-controlled data and compliance with DLA procurement directives, with inspection and acceptance occurring at destination, and no variance permitted in quantity.
Saw Blade and Handtool Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ASSEMBLED
Solicitation # SPE4A0-26-T-4159
The contract pertains to the procurement of a plain assembled nut identified by NSN 5310-01-570-9268, classified as a commercial off-the-shelf item sourced from McMaster-Carr under part number 90675A011. Technical specifications have been updated to reflect a 0.190-24 UNC thread type, explicitly correcting the nominal thread size to not be 10. Compliance is mandated with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and specific requirements such as RQ011, RQ017, and RP001 govern identification, marking, and packaging. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization conforming to DLA’s packaging guidelines. The unit of issue is HD, with a quantity of one unit required to be delivered within five days FOB origin, subject to zero variance in quantity. Delivery is to be made via traceable freight only, no parcel post, to the specified Milwaukee, WI location. Inspection and acceptance occur at destination. The contract is issued under SPE4A0-26-T-4159, with a required delivery date of July 30, 2026, and points of contact and procurement details are provided for official coordination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4156
This contract outlines the procurement of a single structural support item under solicitation SPE4A0-26-T-4156, with a delivery deadline of 20 days from award and FOB origin terms. The item, identified by NSN 1560016065505 and part number 5009329012-021, is required in a quantity of one unit and must be delivered to Minneapolis, MN. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards like ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. The material does not have a shelf life, and unit identification is not required per customer request. Sampling is mandated to follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes default to major classification. The supplier must meet ISO 9001:2015 quality management requirements and comply with CMMC Level 2 self-assessment for cybersecurity. Packaging must adhere to hazardous material guidelines if applicable, and shipment requires traceable freight methods—parcel post is prohibited. Delivery is to be made to a designated government facility, with inspection and acceptance points set at the destination. All documentation, including source approval requests and marking requirements, must follow DLA protocols, and the item's physical identification must reflect RQ017 specifications. The contract prohibits quantity variance and requires strict adherence to the unit of issue and packaging specifications outlined in the purchase order.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A0-26-T-4158
The contract specifies the procurement of 4 units of INSERT, SCREW THREAD with NSN 5325-01-517-2773, to be delivered FOB origin within 5 days of award, under solicitation SPE4A0-26-T-4158. Delivery is required to W6KG AMSA 49 in Milwaukee, WI, with strict packaging compliance mandated by ASTM D3951 and MIL-STD-129, while all DLA Master List of Technical and Quality Requirements take precedence over any general standard. The item must be marked and labeled per MIL-STD-130N, with no government identification on non-accepted supplies, and must adhere to CMMC Level 2 self-assessment requirements. Shipping must be via traceable means excluding parcel post, with RDD/ NMCS shipment protocols applied. The unit price is $4.00 per EA with zero variance in quantity permitted. Packaging and palletization follow RP001 DLA packaging directives, and the unit of issue is EA as defined in official DoD guidelines. The contract includes specific identification codes for marking, shipping, and government use, with performance requirements linked to the supplier Pierce Manufacturing Inc. using part number 82-0260-0002. The original required delivery date is July 30, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 12, 2026.
Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CONDUIT, METAL, FLEXIBLE
Solicitation # SPE4A0-26-T-4166
The contract specifies the procurement of 20 feet of metal flexible conduit, identified by NSN 5975-01-119-4381 and part numbers 750-085-24 from GLENAIR, INC. and SM83-06NC from B.W. ELLIOTT MANUFACTURING CO., LLC, under solicitation SPE4A0-26-T-4166. Delivery is required within five days FOB origin, with a quantity variance of plus ten percent and zero percent minimum, and inspection and acceptance occur at the destination. The material has no shelf life requirement and must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must follow MIL-STD-129 and RP001 guidelines, with hazardous material handling conforming to FED-STD-313 and TQ requirement IP025. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs as specified. Marking and identification must include required manufacturer and part information, and shipping must use traceable freight methods, excluding parcel post. The delivery point is Fort Drum, NY, with ship-to and mark-for addresses matching the military unit designation W810DR, and the contract prohibits use of parcel post. The required delivery date is July 30, 2026, and the unit of issue is feet.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPING
Solicitation # SPE4A0-26-T-4163
The contract pertains to the procurement of four tapping screws with NSN 5305-01-568-8884, issued under solicitation SPE4A0-26-T-4163 by the Department of Defense’s Aviation Supply Chain ESOC Buys. Delivery is required within five days of award, with the solicitation posted on August 4, 2026, and responses due by August 12, 2026. All supplied items must comply with DLA’s Master List of Technical and Quality Requirements, referenced by R- or I-numbers, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Physical identification and bare item marking are mandated per RQ017, and government identification must be removed from non-accepted supplies under RQ011. Packaging must adhere to DLA’s procurement packaging standards outlined in RP001. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in samples unless otherwise stated, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The place of performance is specified as Milwaukee, Wisconsin, with Danita Davis listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A0-26-T-4157
The contract specifies the procurement of one unit of a dial pressure gage identified by NSN 6685-01-475-8408 and part number SG1N3HPWPANAG under solicitation SPE4A0-26-T-4157, with delivery required within 125 days FOB origin. All items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, zero non-conformances unless otherwise stated, and specific verification levels assigned to attributes. The gage must be manufactured and packaged in full compliance with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 including the special code for delicate instrument, and palletization aligned with DLA standards. Inspection and acceptance occur at origin, with no tolerance for quantity variance. The technical data package follows REV A Gen 1 per MIL-G-18997E(2), and all non-accepted items must have government identification removed. Testing is to be conducted at the Naval Surface Warfare Center Carderock Division in Philadelphia, Pennsylvania, and the unit of issue is EA with a total price of one dollar.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
STABILIZER, HORIZONT
Solicitation # SPE4A0-26-T-4165
Offerors must submit quotations for a stabilizer component under solicitation SPE4A0-26-T-4165, a total small business set-aside with a NAICS code of 336413, where only small business concerns are eligible to compete. The requirement is for one unit to be delivered within five days of award, and offerors are strongly encouraged to provide quantity ranges in their quotes due to the unpredictable nature of open purchase requests, enabling buyers to consolidate or adjust volumes without re-soliciting. Fast pay is not applicable, and the submission of a “No Bid” on DIBBS is recommended for potential future bids to prevent assumptions of non-responsiveness. Offerors must certify they will not supply covered telecommunications equipment or services as prohibited by FAR 52.204-24 and DFARS 252.204-7016. Compliance with domestic sourcing restrictions under the Berry Amendment, Buy American Act, and related clauses DFARS 252.225-7006, 7012, and 7015 is mandatory; any use of non-domestic materials requires explicit disclosure. Small business joint ventures must include specific representations from FAR provisions 52.212-3 and 52.219-1. All contractors must soon register through DLA’s new Account Management & Provisioning System to access the Vendor Shipment Module, and those using VSM WebServices must implement schema updates by the specified deadline. Additive manufacturing is prohibited unless explicitly approved, and offers containing AM-produced items will be deemed non-responsive. APEX Accelerators offer free support to help businesses navigate federal contracting. The point of contact for questions is Danita Davis, and all submissions must be made via DIBBS before the closing date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE4A0-26-T-4162
The contract calls for the procurement of six self-locking hex nuts identified by NSN 5310-01-694-7383 and part number 12561460-74, with a unit price of $6.00 and a total contract value of $36.00. Delivery is required within five days of the award date, shipped FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservative methods, packaging materials, and unit containment, with all marking adhering strictly to MIL-STD-129 without any special markings. The items must be palletized in accordance with DLA packaging standards, and shipping must utilize traceable freight methods—parcel post is prohibited. The shipment is destined for W90KE4, W8SS NY ARNG FMS 15 in Queensbury, NY, and must be delivered by July 30, 2026. Sampling and quality verification follow MIL-STD-1916 or an equivalent zero-based plan, with verification levels and AQLs assigned per critical, major, or minor attributes as defined in referenced standards. The contract incorporates technical and quality requirements from the DLA Master List, and the manufacturer may choose between attribute or variable inspection unless otherwise directed. The solicitation number is SPE4A0-26-T-4162, issued under the NAICS code 332722 by the Department of Defense’s Aviation Supply Chain ESO Buys, with Danita Davis as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 483112
New
DIBBS
Logistics and FOB Destination DeliveryThe contract requires the timely execution of FOB destination shipping for a cable assembly, with delivery mandated to FPO AP 96692-1100 within five days of award, using logistics channels compliant with military standards. The shipment must adhere strictly to the FOB destination terms, meaning title and risk transfer to the recipient only upon arrival at the specified military postal address, ensuring full accountability and adherence to defense supply protocols throughout transit. The effort is classified as a subcontract under NAICS code 483112, managed by the Department of Defense’s Aviation Supply Chain ESOC Buys, and is part of a larger procurement initiative to support operational readiness through precise and secure logistics execution. All responses to this solicitation must be submitted by August 11, 2026, with the opportunity posted on August 3, 2026, allowing interested parties a defined window to propose capacity and compliance. The place of performance is distinctly identified as the FPO address, indicating delivery to a U.S. military unit stationed overseas, necessitating specialized handling, documentation, and routing through approved defense logistics networks. There is no set-aside designation specified, and participation is open to qualified subcontractors capable of meeting the rapid timeline and stringent military compliance requirements without deviation.
Deep Sea Passenger Transportation

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract requires the identification of hazardous components within the supply chain, the authoring and ongoing maintenance of Safety Data Sheets (SDS) in accordance with OSHA standards, and full compliance with DFARS regulations. The work focuses on ensuring that all hazardous materials are properly documented, classified, and communicated to meet federal safety and defense requirements. The contractor must have the expertise to manage SDS documentation throughout the lifecycle of materials, update them as new information becomes available, and align all processes with current regulatory frameworks to support safe handling, storage, and transportation. This is a subcontract under the Department of Defense's Aviation Supply Chain ESOC Buys, with the place of performance listed as FPO with ZIP code 96692-1100. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026, underscoring a tight timeline for submission. The NAICS code 541620 indicates the work falls under environmental and other scientific consulting services, emphasizing the technical and regulatory nature of the task. Compliance is non-negotiable, with expectations for accuracy, timeliness, and adherence to both occupational safety and defense acquisition regulations to support mission-critical defense operations.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details