Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A6-26-T-12LVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two machine bolts identified by NSN 5306-01-533-2627 and part number AEB02C438A00AW9A61, manufactured in accordance with ASME B18.2.1 Revision NR dated 01/01/2012 and referenced against ASME B18.24 Revision NR dated 11/20/2015. All hardware must conform to the current revision of the applicable part standard, and past revisions are acceptable only if they were current at the time of manufacture. The item is classified as a critical application item and must adhere to DLA’s Master List of Technical and Quality Requirements, including tailored quality provisions, inspection at origin, removal of government identification from non-accepted items, and physical marking of bare parts. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels or AQLs must be assigned per attribute classification. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements. The unit of issue is each (EA), with no variance allowed in quantity. Delivery is required FOB origin within 10 days to Fort Benning, Georgia, via traceable freight methods excluding parcel post. Inspection and acceptance occur at destination. The contract prohibits use of parcel post and mandates shipment through designated military logistics channels with specific identifiers including RDD, TPN, and W33BQ9. The required delivery date is July 29, 2026, with an awarded unit price of $2.00 per item for a total price of $4.00. The solicitation number is SPE4A6-26-T-12LV, issued by the Department of Defense, with Monica Clark designated as the primary point of contact.

General Info

Procure two critical machine bolts, FOB origin, deliver by July 29, 2026, $2.00 each, DLA standards, no parcel post.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

BLDG 9057 IVY RD, FORT BENNING, GA, 31905, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12LV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Monica Clark
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT, MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
SPE4A6-26-T-12LV
SECTION B
TDP Rev C Gen 3 IAW BASIC NON GOVT STD ASME B18.2.1 REVISION NR DTD 01/01/2012 PART PIECE NUMBER: AEB02C438A00AW9A61
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD ASME B18.24 REVISION NR DTD 11/20/2015 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017688295 0001 EA 2.000
NSN/MATERIAL:5306015332627
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33BQ9
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
RDD(3-POS RDD)/ANMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33BQ9
SPE4A6-26-T-12LV
SECTION B
PR: 7017688295 PRLI: 0001 CONT’D
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
MARKFOR
W33BQ9
W6YG USALRCTR FT BENNING
AWCF SSF
BLDG 9057 IVY RD
FORT BENNING GA 31905
US
M/F: (TCN) W33BQ962050364
RDD: E
PROJ: TP 2
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE4A6-26-T-12LV NSN/Part Number: 5306-01-533-2627 Quantity: 2 EA Purchase Request: 7017688295QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-11PL
The contract pertains to Production Lot Testing for NSN 0001S00000062, with a quantity of 53 units, under Purchase Request 7017740350, and requires delivery within 231 days after award. The solicitation number is SPE4A6-26-T-11PL, posted on August 4, 2026, with responses due by August 12, 2026, and is administered by the ASC Commodities Division under the Department of Defense. The place of performance is in San Diego, California, with Monica Clark listed as the primary point of contact. Contractors must prepare a Production Lot Test Report clearly labeled with the contract and lot/item numbers, submit it to the QAR for review, and include comprehensive documentation with each shipment of test reports, including DD Form 1222 and DD Form 250/iRAPT signed by the QAR, a copy of the contract or order, all test reports with actual results and tolerances, material and process certifications, operation and inspection method sheets, and the drawings used to manufacture the test sample with appropriate markings to restrict public disclosure and limit government use.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-12CM
The contract specifies the procurement of 106 units of a screw, cap, hexagon head with NSN 5305-01-516-6128 under solicitation SPE4A6-26-T-12CM, with a required delivery date of December 26, 2026 and a delivery window of 171 days FOB origin. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including physical identification, packaging per MIL-STD-2073-1E, and marking per MIL-STD-129 with no special marking code. Zero tolerance is mandated for non-conformances under the specified sampling plan, which follows MIL-STD-1916 or a comparable zero-based method, with verification levels assigned per critical, major, and minor attributes. Mercury or mercury-containing compounds are strictly prohibited in the component itself, its preservation, packaging, and marking, except for specific functional uses authorized by NAVSEA, with portable devices containing mercury requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The item is designated as a critical application item with a prescribed part number from McMaster-Carr Supply Co. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and the purchase is subject to a strict 0% variance in quantity. The contract includes detailed documentation requirements for source approval, removal of government identification from rejected supplies, and adherence to DLA packaging and transportation procedures, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-12NS
The contract is for 690 hexagon head cap screws with NSN 5305-01-388-6229, issued under solicitation SPE4A6-26-T-12NS by the Department of Defense’s ASC Commodity Division. The screws are critical application items and must meet technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with packaging and marking strictly compliant with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA’s packaging guidelines. The item is sourced from YANMAR AMERICA CORPORATION and MPOWER PROJECTS PTY LIMITED DBA Z4781 with respective part numbers, and must be delivered FOB origin with no quantity variance allowed. Inspection and acceptance occur at the origin point, with delivery required within 80 days of notice. Two delivery locations are specified: DLA Distribution Albany, Georgia for 254 units with a need ship date of August 4, 2026, and DLA Distribution Cherry Point, North Carolina for 436 units with a need ship date of May 2, 2027, though both must meet the original delivery deadline of March 1, 2027. All documentation must include proper government identification and follow prescribed removal protocols for non-accepted supplies. The unit of issue is each, and pricing is fixed at $0.23 per unit for the first lot and $0.16 per unit for the second, totaling $952.87.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-5028
The contract pertains to the procurement of 261 electrical plug connectors identified by NSN 5935-01-393-4090 under solicitation SPE7M1-26-U-5028, with a total small business set-aside and a NAICS code of 332112. Delivery is required within 47 days after order placement, and responses must be submitted by August 19, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. All supplies must comply with strict mercury restrictions, prohibiting intentional addition or direct contact with mercury or mercury compounds, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, and authorized chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. Non-accepted supplies must have government identification removed, and all items must be physically marked according to DLA standards. The offeror must provide a complete data package for both the approved and alternate parts, as no existing data is available. The contracting office is the Maritime Supply Chain under the Department of Defense, with primary point of contact Bryan Fair at Bryan.Fair@dla.mil.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M1-26-U-4903
This contract is for the procurement of an electrical plug connector under solicitation SPE7M1-26-U-4903, with a total quantity of 96 units, delivered FOB origin within 99 days. The item, identified by NSN 5935-01-222-8185, is classified as a critical application item and must comply with strict technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The contract prohibits the intentional addition of mercury or mercury compounds to the hardware except in specified exceptions such as batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents approved by NAVSEA. Portable devices containing mercury must be shock-proof and include a secondary containment barrier consistent with NAVSEA 5100-003D. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, using the D3 container type and no special marking code. Sampling procedures must follow MIL-STD-1916, ASQ H1331, or a comparable zero-defect plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise stated. The contract is issued under a Women-Owned Small Business Set-Aside and includes detailed packaging, inspection, and acceptance conditions at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1471
The contract specifies the procurement of copper alloy 464 in temper H02, supplied as hot or cold worked round bars with a diameter of 6.000 inches and lengths between 3 and 8 feet, with a reference weight of 103.000 pounds per foot. All material must conform to ASTM B21/B21M-20, ASTM B249/B249M-23, ASTM B900-16(R2022), and SAE AMS-STD-185A, and must be supplied in whole foot increments only. Each unit must be continuously marked with the DLA contract delivery order number, NSN, specification number and revision, alloy grade and temper, manufacturer’s name, heat and lot number, and dimensions using stamping or stenciling that ensures legibility, waterproofing, and resistance to handling damage; adhesive labels are required for bars under 0.250 inches in nominal OD. A Certificate of Quality Compliance, including mill material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. The Qualified Suppliers List for Distributors (QSLD) requirement is strictly enforced—only suppliers listed on the QSLD as of June 1994 are eligible, and any deviation must be explicitly declared; non-compliant submissions are considered unauthorized substitutions and may incur criminal penalties. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking per ASTM B900 and MIL-STD-129R, including special codes ZZ. The NSN is 9530002289280, with a 160-day delivery schedule, FOB origin, and a 10% quantity variance allowed. Inspection and acceptance occur at destination, and the contract references CDRL-METALSCERT for certification documentation, which must be included unless waived under QSL compliance. The solicitation number is SPE8E4-26-T-1471, with a response deadline in August 2026 and delivery required by October 2026 to the DLA distribution center in Tracy, California.
DLA DIST SAN JOAQUIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, E
Solicitation # SPE7M1-26-U-4486
This contract, issued under solicitation number SPE7M1-26-U-4486 by the Department of Defense’s Maritime Supply Chain, is an indefinite delivery contract for 10 units of electrical connector receptacles identified by NSN 5935-01-460-4596 and part number D38999/24WJ20SB. The item must fully comply with MIL-DTL-38999N Revision N dated September 14, 2023, and is classified as a critical application item subject to stringent quality and traceability controls. Only qualified manufacturers listed on the Qualified Products List for Federal Stock Class 5935 are acceptable, and components manufactured by Amphenol (CAGE 77820), Matrix (CAGE 14283), or Pyle National (CAGE 49367) with lot dates between July 2006 and June 2016 are expressly prohibited. Traceability documentation confirming manufacturing origin and date may be required before or after award. The use of ozone-depleting substances in any phase of design, manufacturing, testing, or cleaning is strictly forbidden without written approval from the contracting officer. Delivery is FOB origin with an 81-day delivery window, and the quantity is estimated at 10 units with zero variance allowed. Inspection and acceptance occur at destination per FAR 52.246-2, and packaging must adhere to MIL-STD-129 requirements, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951—though DLA Master List requirements override ASTM where applicable. Palletization must follow RP001 guidelines. All packaging must be properly marked with the unit of issue and quantity per unit pack as specified. The contract incorporates numerous FAR and DFARS clauses including mandatory representations on employment eligibility, trafficking in persons, sustainable products, hazardous material identification, cyber safeguarding, and prohibition of covered defense telecommunications equipment. Offerors must have a valid UEI and CAGE code, and socioeconomic status certifications such as small business, 8(a), HUBZone, SDVOSB, WOSB, or EDWOSB must be certified. Proposals must be submitted electronically through DIBBS by August 4, 2026, with payment processed via WAWF. All performance obligations are governed by the D
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-11WW
The contract is for the procurement of 85 machine bolts identified by NSN 5306-01-429-7098 under solicitation SPE4A6-26-T-11WW, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a commercial item and must comply with all applicable DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item is designated as a critical application part with approved suppliers including General Dynamics, Oshkosh Defense, Caterpillar, and Finning UK Ltd, and while unit identification is not mandated, physical marking requirements for bare items must be met. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is September 2, 2026, with a contract-advised delivery window of 171 days, and the need ship date is set for January 31, 2027. Sampling inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and attributes are to be classified with specified verification levels or AQLs. All packaging and shipping must align with DLA procedural notes C19 and C20, and the shipment is addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract specifies the unit of issue as each, with a total price based on a single unit price applied to the full quantity of 85 units.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-12PT
This contract pertains to the procurement of a machine bolt, identified by part number C9778L14061 and NSN 5306012987332, with specified manufacturing sources including SPS Technologies, LLC and Valley-Todeco, Inc. The item is classified as a critical application component requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, accessible via the designated website. All deliveries must comply with MIL-STD-2073-1E packaging directives and MIL-STD-129 marking requirements, with no special marking codes applied. The unit of issue is each (EA), and the contract mandates delivery FOB origin with zero tolerance for quantity variance. Inspection and acceptance occur at the point of origin, and the seller must provide a Certificate of Quality Compliance along with documentation referenced in the Technical Data Package. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The contract includes three line items: the primary item for 334 units with a unit price of $1.00 and a 264-day delivery window, a separate first article test (FAT) line item for one unit priced at $1.00, and a production lot test (PLT) line item for one unit also priced at $1.00. The FAT and PLT quantities signify test requirements rather than procurement volumes, and offerors must comply with FAR clauses 52.209-3 and 52.209-4 regarding government testing procedures. No separate charge is assumed for these tests unless explicitly priced. The contract is issued under a Women-Owned Small Business Set-Aside with NAICS code 332112 and is managed by the Department of Defense’s ASC Commodities Division. Delivery is directed to DLA Distribution Depot Hill in Hill AFB, Utah, with a required ship date of September 6, 2026, and an original delivery deadline of September 20, 2026. Configuration control, deviation requests, and quality conformance inspections are governed by specific DLA requirements, including RQ002 and RQ006, and all equipment used for measurement and testing must be properly calibrated and documented.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11WN
The contract specifies the procurement of machine screws identified by NSN 5305-01-290-6140 and part number 330-011-00, with a unit of issue of PG (25 screws per pack) and a total quantity of 12 packs, amounting to 300 screws. Delivery is required within 208 days from the contract date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 while adhering to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, including mandatory labeling and marking per MIL-STD-129. Palletization must follow DLA Packaging Requirements, and all items must be physically marked in accordance with RQ017, including manufacturer and part number details. Sampling and quality verification follow zero-defect standards under MIL-STD-1916 or ASQ H1331 Table 1, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise contracted, and MIL-STD-105 or ASQ Z1.4 may be used for sample size determination only. The item is subject to the DLA Solicitation SPE4A6-26-T-11WN, with a response deadline in August 2026 and an original delivery target of July 2027, though the ship date is set for March 2027. All packaging and labels must reflect government compliance standards, and removal of government identification from non-accepted items is required per RQ011. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures follow DLAD Proc Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-11YF
The contract pertains to the procurement of 191 machine bolts identified by NSN 5306-01-369-1742 and part number 12414307-110, under solicitation SPE4A6-26-T-11YF, with a unit price of $191.00 and a total value of $36,481. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0, and unspecified attributes are treated as major. The manufacturer must maintain ISO 9001:2015 quality management certification and ensure inspection and acceptance occur at origin, with packaging and marking strictly conforming to MIL-STD-2073-1E and MIL-STD-129, respectively. No special marking is required. The delivery is FOB origin with a 171-day delivery window, and the required delivery date is June 4, 2027, though the need to ship date is January 31, 2027. Packaging and palletization follow DLA-specific guidelines, and shipment is directed to the DDSP New Cumberland Facility in Pennsylvania. The contract includes provisions for covered defense information and authorizes Certificate of Conformance procedures unless overridden by a quality assurance letter. All requirements are tied to specific revision levels of technical documentation dated through 2026, with compliance enforced as of the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-12LM
The contract specifies the procurement of 328 machine bolts identified by NSN 5306-00-469-1089, governed by the British Standards Institute standard BS 4A 102A-4E and compliant with MIL-STD-130N for identification marking, in addition to manufacturer logos, lot numbers, and material identifiers. The item is classified as a critical application and must be manufactured in accordance with the current revision of the governing part standard, with past revisions also acceptable if they were current at the time of production. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. All technical and quality requirements referenced by R-numbers from the DLA Master List take precedence over any other standard, including ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization as specified in RP001. Delivery is FOB origin, with inspection and acceptance also occurring at origin, and no variance in quantity is permitted. The unit of issue is each (EA), with a total price of $328.00 per unit for a full contract value of $107,584. The required delivery date is December 10, 2026, with a need ship date of December 6, 2026, and the contract must be fulfilled within 115 days of award. Packaging must meet the DLA-defined Quality Unit Pack (QUP) of 050, and all markings on packaging and containers must comply with MIL-STD-129. The delivery point is DLA Distribution Warner Robins at Robins Air Force Base in Georgia, and transportation logistics must follow DLA Procurement Notes C19 and C20. This solicitation, issued under SPE4A6-26-T-12LM, opened on August 4, 2026, with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Commodities Division under NAICS code 332112.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance and Technical Compliance SupportThe contract titled Quality Assurance and Technical Compliance Support encompasses a range of quality control, testing, and documentation services designed to ensure full adherence to military standards. This includes the preparation and management of Material Safety Data Sheets, detailed inspection reports, and comprehensive traceability systems to guarantee the integrity and compliance of all materials and processes. The work is critical to maintaining defense-grade quality and regulatory alignment across the supply chain, requiring strict procedural discipline and technical expertise. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, with the NAICS code 541330 indicating its classification under engineering services. The solicitation is managed by the ASC Commodities Division within the Department of Defense and is open for response until August 19, 2026, with the original posting date of August 4, 2026. The place of performance and specific location details are not specified, but all deliverables must meet the rigorous technical and administrative requirements demanded by military specifications. Participation is restricted to small businesses qualifying under the SBA’s set-aside program.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
Logistics and Worldwide Distribution SupportThe contract titled Logistics and Worldwide Distribution Support is a small business set-aside subcontract under the SBA program, assigned the NAICS code 493190 for warehousing and storage, and issued by the ASC Commodities Division within the Department of Defense. It requires comprehensive global coordination of shipping, storage, and order fulfillment for cable assemblies, ensuring timely delivery to DLA depots while maintaining strict federal logistics compliance. The contractor must manage inventory levels, track shipments across international borders, and adhere to all military supply chain protocols, including documentation, reporting, and regulatory standards for defense-related materials. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and the performance location spans worldwide, with no specific city or state designated. The work demands end-to-end supply chain visibility, reliable logistics infrastructure, and proven experience in supporting federal defense operations. Only small businesses are eligible to bid, and the successful vendor will be responsible for end-to-end execution from warehouse receipt to depot delivery, with an emphasis on operational precision, accountability, and adherence to defense logistics requirements.
Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
Ribbon Cable Assembly ManufacturingThe contract seeks the manufacture and delivery of ribbon electrical cable assemblies identified by NSN 6150-01-546-7708 and part number 30-275-24H18CA, which must fully comply with applicable military specifications and DLA depot standards. The work is a subcontract under a total small business set-aside as defined by FAR 19.5, exclusively available to small business concerns certified under the SBA program. The NAICS code 334419 applies, indicating the scope involves other electronic component manufacturing, and the solicitation is administered by the ASC Commodities Division within the Department of Defense. All deliverables must meet stringent quality and performance requirements to ensure operational reliability in military applications. The solicitation was posted on August 4, 2026, with a firm response deadline of August 19, 2026. The place of performance is not specified, but the product must be delivered to meet DLA depot logistics requirements, implying compliance with military receipt, inspection, and distribution protocols. The contract is accessible via the DIBBS portal at the provided link, and all proposers are expected to adhere to federal procurement guidelines, including submission of technical, compliance, and small business certification documentation. No point of contact is listed, suggesting all inquiries must be processed through the standard DIBBS mechanisms.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561910
New
DIBBS
Specialty Packaging and Marking CorrectionThe contract titled Specialty Packaging and Marking Correction mandates the repackaging or relabeling of gages that do not comply with military packaging and labeling standards set forth by the Department of Defense. This includes correcting any discrepancies in National Stock Number labeling, CAGE code information, and barcode formatting to ensure full alignment with DoD requirements. The work must be performed to precise specifications to guarantee traceability, compliance, and readiness for military use. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, categorized under NAICS code 561910, which pertains to other support activities for agriculture and mining. The opportunity was posted on August 4, 2026, with responses due by August 18, 2026. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and performance will occur at locations designated by the government. Potential offerors must be certified small businesses eligible for the set-aside and prepared to meet all technical and regulatory demands associated with military-grade packaging and marking correction.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
DIBBS
Calibration and Testing Services for Critical Application ItemsThe contract outlines services for the independent calibration, functional testing, and certification of pressure gages to meet rigorous military performance standards, ensuring all equipment is traceably validated before delivery. These activities are critical to maintaining the integrity and reliability of components used in defense applications, with all work requiring adherence to specified technical requirements and documentation protocols to guarantee compliance. The services must be performed by qualified entities capable of delivering precise, auditable results that support mission-critical operations. This is a total small business set-aside subcontract under NAICS code 541380, designated for small businesses and managed by the ASC Commodities Division within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and is available through the DIBBS platform. Performance location and point of contact details are not specified, but the scope emphasizes nationwide delivery of certified pressure gages meeting DoD quality assurance benchmarks. All contractors must demonstrate capability in handling sensitive calibration and testing procedures aligned with federal military specifications.
Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gage ManufacturingThe contract pertains to the manufacture and delivery of a precision pressure dial indicating gage, identified by NSN 6685-01-165-8961, built to meet strict military specifications. The required unit is modeled after P/N 11006 from 3D Instruments, LLC DBA Sierra, an approved supplier, ensuring compliance with performance, durability, and accuracy standards mandated for military applications. This is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses certified by the SBA, with the NAICS code 334519 indicating classification under Other Instrument Manufacturing. The procurement is managed by the ASC Commodities Division under the Department of Defense, with a response deadline of August 18, 2026, and the solicitation posted on August 4, 2026. Delivery locations and point of contact details are not specified in the provided data, but performance is expected to align with defense logistics requirements.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Defense Telecommunications Equipment ScreeningThe contract seeks technical review and certification services to ensure that telecommunications equipment supplied under the agreement complies with DFARS 252.204-7016 and Section 889 of the National Defense Authorization Act, which prohibit the use of equipment from foreign adversaries. The vendor must verify that all telecommunications products do not originate from or contain components sourced from entities designated as covered foreign adversaries, such as Huawei, ZTE, and other specified organizations, to safeguard national security interests. Compliance requires thorough documentation, supply chain tracing, and formal attestation confirming adherence to federal regulations governing the procurement of secure telecommunications infrastructure. The subcontract is issued by the ASC Commodities Division under the Department of Defense with a NAICS code of 541330, indicating it pertains to other scientific and technical consulting services. The opportunity was posted on August 4, 2026, and responses are due by August 19, 2026. The place of performance and specific agency location are not detailed, but the work is expected to support defense-related telecommunications systems. All proposers must demonstrate capability to conduct rigorous technical evaluations and provide legally defensible certification statements. The contract is open for bidding through the DIBBS platform and does not include any set-aside provisions for specific business categories.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Compliance & Representations Management (Supplier Onboarding Support)The contract supports the prime contractor in ensuring supplier compliance with federal regulations, focusing on key administrative and regulatory obligations such as SAM representations, annual certifications, and adherence to FAR and DFARS clauses. It involves managing the supplier onboarding process to verify that all subcontractors and vendors meet federal requirements prior to engagement, reducing compliance risk and maintaining eligibility for DoD contracts. The scope includes ongoing monitoring and documentation of supplier representations to ensure continuous compliance throughout the contractual relationship. This subcontract is issued by the ASC Commodities Division within the Department of Defense under NAICS code 541611 for administrative management services. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and the place of performance is not specified, indicating potential nationwide or virtual performance. The work is not subject to a specific set-aside designation, and while the point of contact information is not provided, the official solicitation can be accessed through the DIBBS system using the provided link.
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423690
New
DIBBS
Small Business Subcontracting Support (Flow-Down Requirement)The contract outlines participation as a small business subcontractor under a flow-down requirement to provide commercial products or services to the Department of Defense, specifically under the ASC Commodities Division. It mandates adherence to all applicable Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, ensuring compliance with federal subcontracting standards. Accelerated payment terms are included to support small business cash flow, reinforcing the government’s commitment to timely compensation for subcontractors meeting contractual obligations. The solicitation is posted under NAICS code 423690, which pertains to other miscellaneous durable goods merchant wholesalers, indicating the nature of the commercial goods or services involved. The response deadline is August 19, 2026, with the opportunity posted on August 4, 2026, and is structured exclusively as a subcontracting opportunity without a specified set-aside classification. Performance location details are unspecified, but the contract is administered through the Defense Logistics Agency’s DIBBS platform, where all documentation and submissions must be accessed and completed via the provided online portal.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423490
New
DIBBS
Supply of Part-Numbered Commercial Items (CAGE Code-Based Procurement)The contract mandates the supply of specific commercial items identified by unique part numbers and CAGE codes, requiring full compliance with detailed technical and logistical specifications. This includes proper packaging, handling, and delivery protocols to ensure items meet all quality and readiness standards outlined in the procurement requirements. The items are intended for use under the Department of Defense through the ASC Commodities Division, with performance expected to align with defense-grade logistical workflows. Subcontractors must respond by the deadline of August 19, 2026, with bids submitted through the designated DIBBS portal. The North American Industry Classification System code 423490 indicates this involves merchant wholesalers of hardware, plumbing, and heating equipment, suggesting the items are standard commercial components utilized in military applications. There is no set-aside designation, meaning all eligible contractors may compete, and performance location details are not specified, implying flexibility in delivery logistics as long as contract terms are met.
Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.
Fabricated Structural Metal Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334332
New
DIBBS
Cable Assembly Manufacturing and Supply (NSN 5995-01-657-9352)The contract involves the manufacture and supply of the cable assembly identified as RADI RA001 with part number 09-2830203-1 and NSN 5995-01-657-9352 to support delivery requirements for DLA depots under a firm-fixed-price structure with a five-year base period. The work is being procured as a subcontract by the ASC Commodities Division, a component of the Department of Defense, under NAICS code 334332 which pertains to communications equipment manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is accessible via the DIBBS portal. Performance will be conducted in support of defense logistics operations, though specific delivery locations and point of contact details are not provided. The fixed pricing framework establishes clear financial terms while requiring consistent adherence to quality, schedule, and volume commitments over the contract term.

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details