Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

BOLT, MACHINE

Awarded
SPE4A5-25-R-0296Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded The Boeing Company, identified by CAGE code 81205, a modification to delivery order SPRPA119D001U under solicitation SPE4A5-25-R-0296 for the procurement of 12,000 machine bolts (NSN 5306016894621) at a total contract value of $150,159.69, with a unit price of $12.513308 per item. The award was issued on July 17, 2026, and performance is to occur at The Boeing Company’s facility located at 7755 E Marginal Way S, Tukwila, WA 98108-4002, with DCMA Fixed Wing Puget Sound identified as the receiving activity. The contract is structured as a modification to an existing delivery order and does not specify a contract type, delivery schedule, FOB terms, or invoicing method. No packaging, preservation, or labeling standards such as MIL-STD-129 or MIL-STD-2073 are explicitly required, and no technical specifications beyond the NSN are provided. The only clause incorporated into the contract is FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, revised under DoD Class Deviation 2026-00040, Revision 1, which imposes mandatory obligations on the contractor to refrain from race-based DEI activities, report subcontractor violations or legal challenges, provide compliance documentation upon request, and flow the clause down to subcontracts unless performed entirely outside the United States. The contractor is also required to notify the Contracting Officer in writing if it disagrees with or fails to comply with the modification. The Contracting Officer is Carl Allen of DLA Aviation in Richmond, VA, with no designated COR, COTR, or PCO beyond this role. Payment is to be processed through the contracted contractor address in Tukwila, WA, though specific accounting codes or appropriation data are not included. The solicitation was competed without a set-aside, and no socioeconomic certifications or size status are indicated. No evaluation factors, inspection criteria, quality standards, or delivery timelines beyond the award date are stated in the documentation, and no attachments or supplemental forms were provided. Proposals were accepted via email or physical mail to

General Info

Boeing awarded $150,159.69 for machine bolt NSN 5306016894621 under Defense Logistics Agency contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SPE4A526F2580_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
DLA award SPE4A526F2580 posted on DIBBS. Awardee: THE BOEING COMPANY (CAGE 81205) Total Contract Price: $150,159.69 Award Date: 07-17-2026 Delivery order under: SPRPA119D001U Solicitation: SPE4A5-25-R-0296 Line items: - BOLT, MACHINE (NSN/Part 5306016894621, PR 7012593095)

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
Federal
NUT,HEX,SELF-LOCKIN
Solicitation # N0010426QFE05
This contract mandates the supply of self-locking heavy hex nuts designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to MIL-DTL-32258 with specific chemical and mechanical requirements tied to QQ-N-281 Class A or B, and the self-locking element must comply with ASTM-D6456 or ASTM-D4066 depending on temperature rating. Traceability is strictly enforced through unique heat-lot markings on each component and mandatory certification documentation that must directly link to the physical item, with no transcription permitted. All certifications must include full compliance statements signed by authorized personnel, with disclaimers strictly prohibited. Quality assurance systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative including MIL-I-45208 and MIL-STD-45662, subject to government audit at source. First Article Testing requirements are satisfied through prior qualification data or letters from qualified sources, and all material must undergo 100% inspection for traceability marking, certification completeness, and nondestructive testing results. Delivery is governed by a strict schedule requiring certification data submission 20 days prior to shipment and formal acceptance by Portsmouth Naval Shipyard via the WAWF system before any material may be shipped. Final delivery must occur no later than 365 days after contract award, with the order rated DO for national defense priorities. Materials must be mercury-free, marked in accordance with MIL-STD-792, and all internal threads must be cut, not cold-formed. Subcontractor oversight, material handling procedures, and re-certification after processing are tightly controlled, and any deviation or waiver requires prior written approval from the Contracting Officer. All documentation must be submitted electronically through ECDS and WAWF, with notifications sent to designated Navy email addresses, and compliance is monitored under emergency acquisition flexibilities.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
Federal
NUT,SELFLOCKING,HEX
Solicitation # N0010426QED16
The contract pertains to the procurement of a self-locking hex nut, identified by drawing number 845-4498285 and part number 845-4498285PC13, manufactured in accordance with specifications issued by NAVSEA (CAGE 80064). Technical compliance is strictly governed by referenced drawings, specifications, and procurement data, with precedence given to contract amendments, then schedule terms, followed by inspection and quality documents. All technical documentation, including drawings and military standards, must be obtained via the restricted E-Commerce portal and used in their entirety unless prior written approval is granted for deviations. The item is subject to stringent cleanliness controls tied to MIL-STD-767, MIL-STD-2041, and other reactor plant clean standards, mandating packaging in heat-sealed envelopes per MIL-PRF-23199, with green poly bags allowed only under specific conditions. Mercury is expressly prohibited from contact with the part, and any non-conformance or delivery delay requires formal waiver requests accompanied by technical justification and evaluation of impact on form, fit, or function. The contract imposes comprehensive quality assurance obligations requiring the contractor to maintain a government-acceptable inspection system with full records available for audit. Packaging must adhere to MIL-STD-2073 unless otherwise specified, and fire-retardant materials are no longer required. All contractual documents are deemed issued upon electronic transmission, and pricing is valid for 60 days post-closing unless otherwise stated. The solicitation, issued under N0010426QED16 and posted on August 6, 2026, with a response deadline of September 8, 2026, is governed by multiple mandatory clauses including cybersecurity maturity certification, small business program representations, equal opportunity provisions for veterans and workers with disabilities, and security prohibitions under a class deviation. Distribution of all technical data is restricted to U.S. government personnel and contractors under a NOFORN designation, requiring prior approval for any foreign dissemination. Submission of a Certificate of Compliance per DI-MISC-81356 is mandatory at delivery, and all deliverables must conform to DD Form 1423 requirements with strict adherence to inspection and acceptance codes, data item descriptions, and distribution statement protocols.
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
SCREW, SLF-LKG, SCH
Solicitation # N0010426QFG59
This contract pertains to the procurement of self-locking cylindrical socket head cap screws designated as special emphasis material due to their critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or vessels. The screws must comply strictly with FF-S-86, Type VI, and MIL-DTL-18240 standards, featuring a six-dot marking to indicate the self-locking feature and manufactured from K-MONEL material that undergoes specific heat treatment procedures per QQ-N-286. Mechanical testing requirements include wedge tensile tests for all headed fasteners with defined wedge angles based on size and grade, and slow strain rate tensile tests must be performed only by approved laboratories listed in the contract. Material traceability is mandatory from raw material through final assembly, with permanent markings and documentation linking each item to its objective quality evidence, including test reports and certification data. The contract mandates compliance with ISO-9001 and ISO-17025 quality systems, with government inspection at source and full audit rights for the contracting officer. Certification of compliance must be submitted for each lot, containing specific mandatory details including traceability to individual item markings, NSN, lubricant information, and a signed affirmation of full compliance—all without qualified disclaimers. All certification documents must be submitted via Wide Area WorkFlow prior to shipment, with delivery scheduled 270 days after submission of data, and Portsmouth Naval Shipyard must formally accept all documentation before any material is shipped. The contract enforces rigorous configuration control, requiring all engineering changes to be submitted as formal Engineering Change Proposals classified as Class I or II, with comprehensive impact analyses covering logistics, operations, safety, and lifecycle cost. Deviations and waivers—from minor to critical—require prior written approval from the Contracting Officer, with all requests submitted electronically and accompanied by corrective action plans. Mercury contamination is strictly prohibited, and packaging must conform to MIL-STD-2073. The solicitation is a total small business set-aside under a specific DEV 2026-O0037 authority, with applicable Buy American and security prohibition clauses in effect. All referenced documents including MIL-STD-792, ANSI/ASQ Z1.4, and SS800-AG-MAN-010/P-9290 must be current or approved via the ECDS system. Final acceptance hinges on 100% inspection of certification data, zero-defect lot acceptance criteria, and mandatory government
Navsup Weapon Systems Support Mech

POSTED

about 10 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 483110
New
DIBBS
Domestic and International Freight Logistics to FPO AddressesThe contract requires coordination and execution of domestic and international freight logistics to transport battery assemblies to FPO addresses aboard U.S. Navy vessels, ensuring all shipments adhere to military logistics protocols and utilize exclusively U.S.-flag carriers. The work involves managing the full supply chain from origin to final delivery, with strict compliance to Department of Defense standards for handling sensitive military cargo, including timely delivery, secure transit, and accurate documentation through military shipping channels. Performance is centered on FPO 09565, and all operations must align with Navy and DLA requirements for reliability and security in sensitive military environments. This is a small business set-aside subcontract under the NAICS code 483110, designated for total small business participation, meaning only businesses certified as small by the SBA are eligible to bid. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and successful bidders will be expected to demonstrate proven capability in military freight logistics, familiarity with FPO delivery systems, and experience handling hazardous or high-value battery shipments under strict regulatory oversight.

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging, Marking, and Hazardous Materials HandlingThe contract requires full compliance with MIL-STD standards for the packaging, preservation, labeling, and hazardous materials documentation of battery shipments destined for military locations, ensuring all procedures meet rigorous defense logistics requirements. This subcontract is a total small business set-aside under the SBA program, limiting eligibility to qualified small businesses and emphasizing support for small business participation in defense supply chains. The NAICS code 493190 identifies the work under Other Support Activities for Transportation, reflecting logistics and handling services critical to defense operations. The place of performance is designated as FPO 09565, indicating shipments will be delivered to U.S. military facilities overseas, likely through military postal channels. All work must adhere to strict safety and regulatory standards for hazardous materials, particularly batteries, which demand precise labeling, containment, and documentation to ensure safe transport and handling. The opportunity was posted on August 5, 2026, with a response deadline of August 14, 2026, giving potential bidders approximately nine days to submit proposals. The contract is managed by the Defense Logistics Agency under the Department of Defense, underscoring its importance to the broader military supply chain and operational readiness.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 325510
New
DIBBS
Military-Grade Polyurethane Coating SupplyThe contract requires the supply of two-part polyurethane coating kits certified to meet MIL-PRF-85285 specifications, ensuring high-performance durability and environmental resistance for military applications. The coating must conform to FED-STD-595/14187 color standards for precise visual identification and compliance with military operational requirements. All materials must be packaged in accordance with military packaging standards to guarantee integrity during transit and long-term storage. The place of performance is designated as March Air Reserve Base with a ZIP code of 92518-1748, indicating the primary delivery and application location. The NAICS code 325510 classifies this as a specialty chemical manufacturing solicitation under the broader chemical manufacturing sector. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a posting date of August 5, 2026, and a response deadline of August 11, 2026. Suppliers must submit proposals through the DIBBS system using the RFQ reference number SPE8ES26T2520. There is no set-aside designation specified, meaning the contract is open to all qualified vendors regardless of business size or classification. The absence of a designated point of contact suggests the procurement process is fully automated through the DIBBS portal, necessitating full compliance with all technical, packaging, and delivery requirements without personalized guidance.
Paint and Coating Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and FOB Origin LogisticsThe contract requires the provision of first destination transportation from the manufacturer’s location to Fort Leonard Wood, Missouri, under FOB Origin terms, meaning the buyer assumes responsibility for the goods and associated risks once they leave the manufacturer’s facility. The successful bidder must coordinate all aspects of carrier logistics, including scheduling, routing, and documentation, while ensuring full compliance with military base delivery requirements for a Department of Defense installation. This includes adherence to security protocols, access procedures, and any stipulated delivery windows or handling standards mandated by the installation. Insurance coverage is mandatory to protect the cargo during transit, and the contractor is responsible for securing appropriate policies that meet or exceed federal and military standards. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for specialized freight, and is managed by the Defense Logistics Agency. Proposals must be submitted by August 17, 2026, and performance will be executed at the designated delivery location with zip code 65473-8947, with no indication of set-aside status or specific small business preferences. All activities must align with the operational and regulatory expectations of the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 11 days
View Details