Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, MACHINE

Active
SPE4A6-26-T-07XCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 112 machine bolts identified by NSN 5306-01-492-6795 under solicitation SPE4A6-26-T-07XC, issued by the Department of Defense’s ASC Commodities Division. The requirement is a total small business set-aside under NAICS code 332112, with responses due by July 28, 2026, and delivery expected within 258 days after order placement. The item is subject to multiple technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect at the solicitation issue date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is controlled under ITAR or EAR, restricting its export or disclosure to foreign persons unless authorized by the Department of State or Commerce, and only contractors with approved JCP certification, completed export control training, and DLA authorization may access such data. The place of performance is Tracy, California, with Tyler Greene as the primary point of contact.

General Info

Procurement of 112 machine bolts under small business set-aside, due July 28, 2026, with ITAR/EAR-controlled data and Tracy, CA delivery.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

Request for Quotations SPE4A6-26-T-07XC

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tyler Greene
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5306-01-492-6795 Quantity: 112 EA Purchase Request: 7017527789QTY: 112 Delivery: 258 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
Precision Metal Fabrication of Bearing LinerThe contract requires the manufacture of a precision-engineered bearing housing liner to full military specifications, demanding exacting adherence to dimensional tolerances, material composition, and quality control standards for use in defense applications. The product must meet rigorous performance and reliability criteria appropriate for critical military systems, with all manufacturing processes subject to strict compliance verification. Subcontractors are expected to demonstrate capability in high-precision metal fabrication and quality assurance protocols consistent with defense industry requirements. The solicitation is issued under NAICS code 332112 for forged and stamped metal product manufacturing, classified as a subcontract opportunity posted by the ASC Commodities Division of the Department of Defense. The response deadline is set for July 28, 2026, with performance to be carried out at FPO, ZIP 96306-1204. All submissions must be received by the stated deadline through the official DIBBS portal, and technical and compliance qualifications will be evaluated to ensure alignment with military-grade standards. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors capable of fulfilling the technical and logistical demands.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Electrical Connector ManufacturingThe contract requires the manufacture of military-grade electrical connectors conforming to the MIL-DTL-38999N Revision N specification, specifically the D38999/24WJ20SB model, with full compliance to all defense standards for materials, processing, and performance. Every production step must include rigorous traceability documentation from raw material sourcing through final assembly, ensuring complete accountability and quality assurance. Inspections must be conducted per applicable military and industry protocols, with all inspection records retained and available for audit. Packaging must meet stringent defense requirements to protect against environmental damage and ensure readiness upon delivery. The work is classified as a subcontract under the NAICS code 332112, issued by the Department of Defense through the Maritime Supply Chain office. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026. All delivered units must be fully certified, properly labeled, and shipped in accordance with defense logistics procedures to ensure seamless integration into military systems. The place of performance and point of contact details are not specified, but adherence to the exact technical parameters and documentation requirements is mandatory for contract fulfillment.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
Machine Bolt Manufacturing and SupplyThe contract calls for the manufacture and supply of 112 machine bolts designated by NSN 5306-01-492-6795, all of which must meet strict military specifications covering quality, packaging, labeling, and environmental compliance, including a mandatory mercury-free production process. These components are intended for critical military use and must adhere to exacting standards to ensure performance, durability, and safety under operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, reinforcing the government’s commitment to supporting small business participation in defense contracting. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is specified as Tracy, California, with a ZIP code of 95304-5000. The contracting activity falls under the ASC Commodities Division of the Department of Defense, and the appropriate NAICS code is 332112, which classifies the work within the forging and stamping industry. The contract is accessible via the DIBBS platform, and all bidders must ensure full compliance with federal acquisition regulations, particularly those pertaining to small business set-asides, as well as the technical and environmental requirements outlined for the bolts.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Metal Forging and Stamping for Connecting Link, RigThe contract entails the manufacturing of 59,000 units of the Connecting Link, Rig, identified by NSN 3040014537807, adhering strictly to military specifications RA001 and packaging standard RP001. This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency within the Department of Defense, focusing on precision metal forging and stamping processes to meet exacting defense requirements. The work is not tied to a specific geographic performance location, and no set-aside preferences are indicated, suggesting it is open to qualified subcontractors regardless of business size or ownership characteristics. The solicitation was posted on July 20, 2026, and is associated with the NAICS code 332112, which classifies the work under Forging and Stamping. Although no point of contact or detailed office address is provided, the contract can be accessed through the DIBBS system using the reference number SPE7L226P0084. The production volume and adherence to specific military standards indicate this is a critical supply requirement for military equipment, where quality, consistency, and compliance are paramount. The absence of a sole source or set-aside designation implies competitive bidding among qualified metalworking contractors capable of fulfilling the technical and volume demands.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
Precision Forging of Bell Crank ComponentsThe contract entails the precision forging of high-integrity aluminum or steel blanks specifically for the bell crank component identified by NSN 3040-01-158-6089 and part number 70400-02502-046, produced to stringent aerospace material and dimensional standards. The manufacturing process must ensure structural integrity, dimensional accuracy, and compliance with aerospace-grade specifications, as the component is critical to mechanical systems within defense equipment. The work is classified as a subcontract under NAICS code 332112, indicating it falls within the forging and stamping industry, and is awarded through the Defense Logistics Agency under the Department of Defense. Performance of the contract is expected to meet all technical and quality benchmarks required for military aerospace applications, though specific delivery locations or points of contact are not detailed in the provided data. The posting date indicates the solicitation was made in July 2026, suggesting this is a forward-looking procurement activity, and the award is linked to contract SPE4A122G0005 with delivery identifier SPE4A526F7873, providing traceability through DLA’s procurement system. The subcontract structure implies the prime contractor or system integrator is managing the broader assembly while delegating this highly specialized forging task to a qualified supplier with proven capability in high-strength metal component production.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
Raw Material Sourcing and Forging for Aerospace ComponentsThe contract entails the supply of certified raw materials such as aluminum and steel alloys, alongside comprehensive forging services required for the production of aerospace surge tank mounting assemblies. All materials must be supplied with full material traceability from the mill through to the finished component, including the provision of certified Material Test Reports to ensure compliance with stringent aerospace quality standards. The forged parts must meet exacting technical and performance specifications critical to the operational integrity of defense-related aerospace systems. This subcontract is administered by the Defense Logistics Agency under the Department of Defense, with the NAICS code 332112 indicating classification within the forging and stamping industry. The work is performed in support of national defense infrastructure and requires adherence to rigorous documentation and verification protocols to guarantee material authenticity and process control. The contract was posted on July 20, 2026, and is linked to a specific award identification, indicating its integration into broader defense supply chain operations.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRIThis contract specifies the procurement of a connector plug, electrical, identified by NSN 5935-01-276-0612 and part number D38999/46WF32SN, governed by military specification MIL-DTL-38999/46B and referenced under solicitation SPE7M5-26-T-308K. The item is classified as a critical application item and must comply with the Qualified Products List (QPL) requirements for Federal Stock Class 5935 connector assemblies and contacts. Manufacturing by certain vendors is restricted: materials produced by Amphenol (CAGE 77820), Matrix (CAGE 14283), or Pyle National (CAGE 49367) with lot dates between July 2006 and June 2016 are unacceptable, as are those produced by Bendix Corporation (CAGE 77820) between January 1977 and February 1984. Use of any Class I ozone-depleting substances is strictly prohibited in design, manufacturing, or cleaning processes without explicit written approval from the Contracting Officer. Traceability documentation may be demanded to verify manufacturing origin and dates. The item must be procured in quantities of 64 units, delivered FOB origin within 168 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination facility in Tracy, California. Packaging must comply with MIL-STD-129 for marking and labeling, and with either ASTM D3951 for non-hazardous items or FED-STD-313 TQ requirement IP025 if hazardous, with all DLA Master List technical and quality requirements taking precedence over commercial standards. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes must be verified at specified levels with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Palletization adheres to DLA packaging requirements, and delivery must reach the designated warehouse by the original required date of November 20, 2026, with a need ship date of January 5, 2027. The unit price is $64.00 per unit, totaling $4
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINEThe contract pertains to the procurement of machine bolts, identified by NSN 5306001167791, under solicitation SPE4A6-26-T-05KR, with a total quantity of 2,231 units split between two line items—414 units at $414.00 each and 1,817 units at $1,403.00 each. All items are classified as critical application components and are subject to stringent technical and quality standards mandated by the DLA Master List of Technical and Quality Requirements, which override any general industry specifications such as ASTM D3951. Compliance with MIL-STD-129 for labeling and packing is mandatory, and palletization must follow DLA’s RP001 packaging guidelines. Inspection and acceptance occur at origin, with sampling requirements governed by MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise specified, and attributes are designated with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The items are designated as GE PBL and must adhere to technical data package revisions tied to SAE AS9556F and QAP-13873. A Certificate of Quality Compliance is required, and all packaging must be marked in accordance with DLA procedures. Delivery is FOB origin, with fixed quantity limits and no variance allowed. Two separate delivery destinations are specified—Cherry Point, North Carolina, and Tinker AFB, Oklahoma—with required ship dates ranging from January 2027 to November 2028, all within a 191-day delivery window.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract involves the procurement of a precision electrical connector, receptacle type, identified by NSN 5935014604596 and part number D38999/24WJ20SB, governed by MIL-DTL-38999N Revision N dated September 14, 2023, and TDP Rev A Gen 1. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, meaning only manufacturers pre-qualified per procurement note H01 are eligible. Manufacturing traceability is mandatory, with materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 explicitly prohibited regardless of condition, and traceability documentation may be requested before or after award. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless prior written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements while maintaining performance standards. The item is designated as critical application and must be delivered FOB origin with no variance allowed in quantity—exactly ten units at a unit price not specified, delivered in 81 days. Packaging and labeling must strictly adhere to MIL-STD-129, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Palletization must comply with RP001, and bare items must be permanently marked with CAGE code and lot/date codes as required by RQ017. The contract type is an indefinite-delivery vehicle under the Department of Defense’s Maritime Supply Chain with a ceiling value of $350,000 and a guaranteed minimum of one unit. Inspections and acceptances occur at destination, and all deliveries must be invoiced through WAWF. Compliance with federal cybersecurity standards, including NIST SP 800-171 and FAR 52.204-7012, is required alongside flow-down obligations to subcontractors, including hazardous material reporting and U.S.-flag vessel use for international shipments, which demands advanced waiver requests if applicable. Contractors must affirm their size status, UEI, and CAGE code, and represent compliance with anti-trafficking, employment eligibility, sustainable product, and whistleblower rights provisions. No attachments are formally
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of a single electrical plug connector, part number MS3147E12-50S, with a National Stock Number of 5935-00-247-8298, requiring a quantity of twelve units. This is a qualified item under the Qualified Products List (QPL) for Federal Stock Class 5935, and only sources qualified under SAE-AS81703 and referenced in specification MIL-C-81703 Supplement 1A are acceptable; commercial substitutes are prohibited without explicit written government approval. The item is designated as critical application, necessitating strict adherence to technical documentation revisions TDP Rev A Gen 1, with no exceptions for non-conforming components. Manufacturing processes are strictly restricted from using Class I ozone-depleting substances unless written approval from the contracting officer is obtained, and mercury or mercury compounds are banned from contact with the item except in narrowly defined exceptions such as batteries, lighting, and specific instruments, with additional containment requirements for portable devices. Packaging must comply with DLA’s master requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging if non-hazardous, though DLA’s technical requirements supersede all other standards. The item must be delivered FOB origin within 168 days to Robins Air Force Base, Georgia, with zero tolerance for quantity variance, inspected and accepted at destination, and palletized per RP001 guidelines. The contract’s performance deadline is January 5, 2027, with an original delivery requirement of February 14, 2027, under solicitation SPE7M5-26-T-312E, issued by the Department of Defense’s Active Devices Division, and responses were due by July 20, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
COMPRESSOR, REFRIGERATI
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 811212
New
DIBBS
Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.
Computer and Office Machine Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541990
New
DIBBS
Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.
All Other Professional, Scientific, and Technical Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of fasteners in strict compliance with MIL-STD-2073-1E, ensuring all items undergo thorough cleaning and drying processes followed by thread protection using a wrap or sleeve designated by Packaging Code ZZ. Fasteners must be containerized using Unit/Intermediate Container D3 at Packing Level B to meet military standards for shipment and storage readiness. This work is part of a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with a solicitation window open from July 20, 2026, through July 28, 2026. The North American Industry Classification System code 493190 applies, indicating services related to courier and messenger services and warehousing and storage, reflecting the logistical and preservation nature of the work. All performance must conform to military specifications without exception, and the contract is open to qualified subcontractors responding through the DLA DIBBS portal.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing and SupplyThe contract requires the manufacture or supply of exactly 50 units of a close tolerance screw designated by NSN 5305-01-047-8822, engineered to meet stringent military specifications. Full traceability of materials and manufacturing processes is mandatory, ensuring each unit can be documented from raw material sourcing through final inspection. The deliverables are subject to ITAR and EAR regulations, necessitating strict compliance with export control requirements for all associated technical data, documentation, and communications. Performance is tied to defense standards, and the work falls under NAICS code 332721, indicating precision hardware manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, under a subcontract structure managed by the ASC Commodities Division of the Department of Defense. All activities must align with federal defense procurement protocols, and the point of performance is not geographically specified, suggesting potential flexibility in production location as long as compliance and delivery obligations are met.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance at OriginThe contract requires comprehensive inspection and quality assurance services at the manufacturing site in New Cumberland, Pennsylvania, with a focus on first-article and lot acceptance inspections conducted in accordance with MIL-STD-1916. This includes the verification of all critical, major, and minor product attributes to ensure compliance with established military standards. The work is structured as a subcontract under the NAICS code 541330, indicating engineering and technical services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is fixed at the specified zip code 17070-5002. All inspection activities must be carried out on-site at the origin to validate conformity before lot release, ensuring product integrity and adherence to defense quality requirements.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and LabelingThe contract requires compliance with MIL-STD-129 and ASTM D3951 for the packaging, marking, and labeling of military fasteners, ensuring adherence to standardized military specifications for traceability, durability, and uniformity. All packaging must include accurate identification data, barcoding, and proper handling instructions as mandated by these standards, with additional requirements for hazardous material communication if the fasteners or associated components contain regulated substances. The work must be performed in alignment with Department of Defense protocols and delivered to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity under NAICS code 493190, and responses are due by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS system.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection ServicesThe contract requires the provision of cybersecurity compliance services to ensure adherence to CMMC Level 2 and NIST SP 800-171 standards for the protection of controlled unclassified information. The scope of work centers on implementing and maintaining the necessary safeguards, policies, and procedures to meet federal cybersecurity requirements for handling sensitive government data. Performance is expected to be executed at the designated location in Tracy, California, with the contractor responsible for establishing a compliant cybersecurity posture that aligns with Department of Defense standards for subcontractors handling CUI. The contract type is classified as a subcontract under NAICS code 541512, indicating it falls within the computer systems design and related services category. Issued by the ASC Commodities Division under the Department of Defense, the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. All parties engaging in this effort must ensure full alignment with CMMC Level 2 controls, which include access management, audit and accountability, configuration management, incident response, and data protection measures. The contractor is expected to demonstrate readiness for third-party assessment and ongoing compliance validation without relying on external documentation or referenced files.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details