Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, MACHINE

Active
SPE4A6-26-T-11LDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a single machine bolt identified by NSN 5306-01-486-6371 with a delivery requirement of 20 days after contract award. The solicitation number is SPE4A6-26-T-11LD, issued on August 3, 2026, with responses due by August 11, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is exempt from Item Unique Identification as specified by the Service customer, and DFARS 252.211-7003(c)(1)(i) governs the removal of government identification from non-accepted supplies. Packing and rigging must comply with the Technical Data Package, and the contractor is responsible for reviewing and implementing approved packing procedures. The contract is administered by the ASC Commodities Division under the Department of Defense, with performance located at FPO, ZIP 96616. The primary point of contact is David Williams, reachable via email and phone provided. The NAICS code is 332112, and the solicitation is classified as a federal procurement with no set-aside designation.

General Info

Procurement of one NSN 5306-01-486-6371 bolt, delivery in 20 days, solicitation SPE4A6-26-T-11LD, no unique identification required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332112 - Nonferrous ForgingView NAICS

Place of Performance

UNIT 100197 BOX 1, FPO, AP, 96616, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11LD.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
David Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
Packing/Rigging qualification is required IAW Technical Data Package. Contractor is responsible for reviewing and practicing packing NSN/Part Number: 5306-01-486-6371 Quantity: 1 EA Purchase Request: 7017674545QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332112
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A1-26-T-2507
This contract specifies the procurement of a close-tolerance bolt identified by NSN 5306-01-508-6784 and part number NAS6604-128, with a requirement for 30 units to be delivered within 169 days under FOB origin terms and zero quantity variance. The item is classified as a commercial item and must comply with the current revision of the applicable non-government standard NAS6603 through NAS6620, Revision 11 dated December 31, 2025, as well as other referenced technical documents including MIL-STD-130N for identification marking and SYSTEM 22 of FED-STD-H28/20 for dimensional inspection of Class 3A and 3B threads, excluding small threads and self-locking nuts. All manufacturing and quality controls are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for tailored quality requirements, physical identification, and removal of government identification from non-accepted supplies. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs corresponding to critical, major, and minor classifications. Packaging must adhere to ASTM D3951 and MIL-STD-129 with palletization per DLA’s RP001, and all documentation including the Certificate of Quality Compliance must be provided as specified in the Technical Data Package. Delivery is required to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for late delivery, and inspection and acceptance occur at the destination. The contract references multiple revisions of quality assurance provisions and CDRLs, with mandatory compliance to DLA requirements overriding all other standards unless explicitly superseded by contract amendments.
AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
Precision Machine Bolt Manufacturing and SupplyThe contract pertains to the manufacture, packaging, labeling, and delivery of ten precision machine bolts identified by NSN/Part Number 5306-01-417-5781, with strict adherence to MIL-SPEC standards and regulatory compliance including the Berry Amendment and ITAR/EAR requirements. All work must be performed in full alignment with U.S. defense procurement mandates, ensuring that materials and production processes originate domestically and meet stringent export control protocols. The components are critical to military aviation systems and must be produced under controlled conditions to guarantee dimensional accuracy, material integrity, and traceability from raw material to final delivery. The contract is classified as a subcontract under the NAICS code 332112 and is issued by the Department of Defense through the Aviation Supply Chain office, with performance required at a designated facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, indicating a tight turnaround for qualified suppliers to submit proposals. While no set-aside designation is specified, all bidders must demonstrate capability in meeting federal defense manufacturing standards and provide evidence of compliance with export control laws and domestic sourcing mandates. Delivery timelines, packaging specifications, and labeling protocols will be closely scrutinized to ensure seamless integration into military logistics systems.
AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Titanium Alloy Connecting LinksThe contract requires the precision manufacturing of rigid titanium alloy connecting links, also known as tie rods or actuators, specifically for use in F-404 engines aboard F/A-18 Hornet aircraft. These components demand high-precision CNC machining to meet exacting aerospace tolerances and structural integrity standards, ensuring reliable performance under extreme operational conditions. The work must comply strictly with industry-specific aerospace quality and material specifications, with all fabrication processes subject to rigorous inspection and documentation protocols to guarantee mission-critical reliability. The solicitation is classified as a subcontract under NAICS code 332112, indicating specialized metal forging and stamping operations, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Interested parties must submit responses by the deadline of August 17, 2026, with the request posted on August 2, 2026. While the physical location of performance is unspecified, the components are destined for integration into defense aviation systems, and all manufacturing activities must align with U.S. defense supply chain requirements. The contract’s technical scope emphasizes material consistency, dimensional accuracy, and traceability, with no set-aside provisions identified for small or specialized businesses.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332112
New
DIBBS
Manufacture and Delivery of Spacer Sleeve (NSN: 5365017218998)The contract requires the precision manufacturing, quality assurance, packaging, labeling, and delivery of 14 units of a Spacer Sleeve component identified by NSN 5365017218998, with all work must strictly comply with military standards and source-controlled technical data to ensure interoperability and performance under operational conditions. The scope encompasses end-to-end production processes, from raw material procurement through final inspection and shipment, ensuring full traceability and adherence to defense-specific requirements for materials, tolerances, and testing protocols. The subcontract is issued under NAICS code 332112, indicating a focus on forging and stamping operations within the defense supply chain, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, leaving a narrow window for qualified subcontractors to submit proposals. While the place of performance and point of contact information are not specified, all deliverables must meet the stringent documentation and certification standards expected for military-grade components, and the contract is accessible through the DIBBS platform for official reference and submission.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2505
The contract pertains to the procurement of 10 machine bolts with NSN/Part Number 5306-01-417-5781 under solicitation SPE4A1-26-T-2505, issued by the Department of Defense through the Aviation Supply Chain office. The delivery is due within 192 days after order, and responses must be submitted by August 10, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by DLA. DFARS 252.225-7048 governs compliance with these restrictions, which apply uniformly to all entities, including U.S. companies and their foreign subsidiaries. The point of contact for inquiries is Jade Stringfield, reachable via email or phone, with performance located in New Cumberland, Pennsylvania.
AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A5-26-T-318X
This contract specifies the procurement of 816 machine bolts with NSN 5306-01-487-5098 under solicitation SPE4A5-26-T-318X, with delivery required within 313 days of award, to be shipped FOB origin to the DLA Distribution Puget Sound facility in Bremerton, WA. The items must comply with stringent packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking code applied. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be verified at specified levels: VII for critical, IV for major, and II for minor, or corresponding AQLs. The contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, packaging, or marking, except for functional uses in approved items like batteries, fluorescent lights, or specified instruments, which must include a secondary containment boundary per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals and deviation requests, and all technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List. The delivery schedule is firm with no variance allowed, the inspection and acceptance point is at destination, and the unit of issue is each, with pricing and contract details tied to Purchase Request 7017697553.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
LIGHT EMITTING DIOD
Solicitation # SPE7M5-26-T-363Z
The contract pertains to the procurement of 32 light emitting diodes with NSN 5980-01-495-7575 under solicitation SPE7M5-26-T-363Z, issued by the Department of Defense’s Active Devices Division. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Compliance with DLA Packaging Requirements for Procurement is mandatory, and the alternate offeror must submit a complete data package covering both the approved and alternate parts. Government identification must be removed from any non-accepted supplies. The delivery deadline is set for 116 days after award, with performance occurring in Albany, Georgia, 31704-1128. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is assigned the NAICS code 332112 for semiconductor and other electronic component manufacturing. Primary point of contact is Margaret Smith, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-5688
The contract pertains to the procurement of a pressure switch with NSN 5930-00-259-3360, requiring a quantity of eight units to be delivered within 195 days to the Defense Logistics Agency Distribution San Joaquin facility in Tracy, California. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. The product is designated as a critical application item and is subject to qualification on the Qualified Products List or Qualified Manufacturers List. Strict prohibitions ban the intentional use of mercury or mercury-containing compounds in the product, its preservation, packaging, and marking, except for specific functional applications such as batteries, lamps, sensors, weapon systems, and chemical reagents approved by NAVSEA, with portable devices requiring a secondary containment. Use of Class I ozone-depleting substances in manufacturing or processing is prohibited without explicit written approval from the contracting officer, and this restriction overrides any conflicting specification requirements. Full and open competition applies, and the item is governed by Technical Data Package Revision A General 1 per MIL-S-16032M, including the part number IC/L2D. The contract’s solicitation number is SPE7M8-26-T-5688 with a response deadline of August 13, 2026, and the required delivery date is February 25, 2027. All packaging and shipping must follow DLA procedural notes C19 and C20 for transportation and hazardous materials handling, and the unit of issue is each (EA) as defined by DLA standards.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332112
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-4765
The contract involves the procurement of 14 units of a refrigeration compressor identified by NSN 4130-01-574-7713 and part number 18-00091-113, supplied by CARRIER CORP, under solicitation SPE8E8-26-T-4765. Delivery is required within 195 days after award, with a firm delivery date of February 18, 2027, and a need ship date of February 12, 2027. The item is to be delivered FOB origin to the DDSP NEW CUMBERLAND FACILITY in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit price is $14.00 per unit, resulting in a total contract value of $196.00. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. Palletization and labeling must adhere to RP001 and MIL-STD-129, including barcoding and hazardous material markings as per 29 CFR 1910.1200. The contract incorporates numerous FAR and DFARS clauses, including those on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and NIST SP 800-171 cybersecurity requirements. Compliance with the DLA Master List and related technical identifiers RA001, RQ011, RD003, and RC001 is mandatory. The contractor must use WAWF for invoicing and must provide a UEI and CAGE code. The solicitation was issued on July 31, 2026, with a response deadline of August 5, 2026, and is managed under NAICS code 332112 by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with no set-aside designation. No option quantities or modifications are specified, and the contract type is not explicitly defined. All supplies are subject to zero percent variance in quantity, and no substitutions or alternatives are permitted without prior approval.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE7L1-26-T-791E
The contract pertains to the procurement of 39 helical compression springs designated by NSN/Part Number 5360-00-140-7946 under Purchase Request 7017385527. The solicitation, identified as SPE7L1-26-T-791E, was posted on July 5, 2026, with a response deadline of July 16, 2026. It is issued by the Defense Logistics Agency under the Department of Defense, specifically as a federal procurement action with no set-aside designation. The springs are intended for use within federal operations, though the exact place of performance and point of contact are not specified. The solicitation is accessible via the DIBBS portal for potential offerors to review requirements and submit proposals prior to the deadline.
LAND SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
Federal
METAL BAR
Solicitation # SPMYM226Q7576
This solicitation, numbered SPMYM226Q7576, seeks bids for a Metal Bar under a Level 1, unrestricted procurement issued by DLA Maritime - Puget Sound, with all submissions required to be completed through SAM.gov and submitted via email to jack.edwards@dla.mil or by fax by the deadline of July 2, 2026 at 9:00 PM Eastern Time. To be considered responsive, offerors must fully complete the solicitation packet including box 17A, sign all required sections on page 1, provide their CAGE code, quote FOB Destination Bremerton, WA, clearly annotate the lead time, and identify both the manufacturer and the country of origin for the products. Items classified as Commercial Off-The-Shelf (COTS) are exempt from NIST SP 800-171 cybersecurity requirements, but offerors must explicitly state this designation and provide supporting information to the contracting officer during bid submission; non-COTS providers must have a current, valid assessment under DFARS 252.204-7019 that is no more than three years old unless otherwise stipulated. The contract requires strict compliance with military traceability and marking standards, including MIL-STD-792 for permanent and temporary markings on metal bars, specifying mandatory inclusion of manufacturer name, specification, grade, size, contract number, traceability code, and “SML” designation where applicable. All items not shipped via parcel services must be palletized in compliance with ASTM-D-3951, and packaging must include required commercial markings such as NSN, quantity, contract number, and ship-to information. Final delivery is due on or before August 7, 2026, to the Puget Sound Naval Shipyard in Bremerton, WA, with acceptance occurring at that destination under government supervision. The Government reserves the right to conduct initial inspection at the contractor’s facility via DCMA and performs final acceptance with zero-defect criteria, requiring 100% inspection of traceability, NDT certifications, and material test reports. Invoicing must be processed exclusively through WAWF using the appropriate document types per line item pricing structure, with payments managed by the DLA Maritime - Puget Sound Contracting Division. Offerors must represent their business size status and provide UEI and CAGE codes, and all submissions must include certified data for chemical and mechanical properties per Exhibit J001 and comply with
DLA Maritime - Puget Sound

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 332112
New
DIBBS
Precision Forging and Machining of Thrust Washers/BearingsThe contract requires the manufacture of precision metal thrust washers and bearings according to detailed technical drawings, encompassing full production processes including forging, machining, heat treatment, and surface finishing to comply with military specifications. All work must be executed to exacting standards ensuring dimensional accuracy, material integrity, and performance under operational conditions typical of defense applications. The fabrication must adhere to established quality control protocols appropriate for military-grade components. This is a subcontract under the Department of Defense’s ASC Commodities Division, with performance scheduled to occur in Anniston, Alabama, at the zip code 36201-4199. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026. The NAICS code 332112 confirms the scope relates to forged metal product manufacturing. While no set-aside designation or point of contact is provided, the requirement is strictly for commercial entities capable of meeting high-specification defense standards within the given timeline.
ASC COMMODITIES DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.
Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.
Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 322291
New
DIBBS
Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.
Sanitary Paper Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-11KT
The contract is for 11 units of a hexagon cap screw identified by NSN 5305-01-710-8361, with a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item contains technical data subject to export controls under ITAR or EAR, requiring prior authorization for any export or disclosure to foreign persons, whether in the U.S. or abroad, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and prior DLA authorization. The solicitation number is SPE4A6-26-T-11KT, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 332722, and performance is to occur in Tracy, California, with primary point of contact Molitauoleava Langi.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details