Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, MACHINE

Active
SPE4A6-26-T-06RLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract mandates the procurement of 303 machine bolts with part number BACB30MB6A6 and NSN 5306-01-607-4479, sourced from approved suppliers including SPS Technologies LLC, West Coast Aerospace, Inc., Hi-Shear Corporation, The Boeing Company, and Howmet Global Fastening Systems Inc. The item is classified as a critical application component subject to stringent quality and traceability controls under DLA Directive Procurement Note C03, requiring the contractor to retain full supply chain documentation. Although item unique identification is not required, the product must comply with FAA bare item marking standards and airworthiness approval requirements as outlined in Proc Note L32 and referenced in CDRL-FAACERTCOM-25015. Packaging and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking and palletization governed by DLA packaging rules. Inspection and acceptance occur at destination under a zero-defect sampling standard consistent with MIL-STD-1916 or ASQ H1331, with critical attributes requiring AQL 0.1 and verification level VII. Delivery is FOB origin with a strict 170-day timeline, targeting January 10, 2027, to Tinker Air Force Base in Oklahoma, and no quantity variance is permitted. The contract enforces configuration management, deviation control, and documentation retention as per multiple DLA technical and quality requirements referenced in the DLA Master List.

General Info

Procure 303 critical machine bolts per DLA specs, FOB origin, by Jan 10, 2027, to Tinker AFB with zero-defect acceptance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06RL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tywanda MADDOX ADDINGTON
contact@example.gov

Full Description

Show more
BOLT,MACHINE
BOLT,MACHINE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ046: FAA Bare Item Marking Requirements
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
SPE4A6-26-T-06RL
SECTION B
Certificate of Airworthiness and Conformance for FAA Certified Parts and Commercial Derivative Aircraft Parts
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
Refer to Proc Note L32 for higher level quality requirements
CRITICAL APPLICATION ITEM
SPS TECHNOLOGIES, LLC 06725 P/N BACB30MB6A6 SPS TECHNOLOGIES, LLC 56878 P/N BACB30MB6A6 WEST COAST AEROSPACE, INC. 60516 P/N BACB30MB6A6 HI-SHEAR CORPORATION 73197 P/N BACB30MB6A6 THE BOEING COMPANY 81205 P/N BACB30MB6A6 HOWMET GLOBAL FASTENING SYSTEMS INC 1RC86 P/N BACB30MB6A6
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015 REVISION NR DTD 01/14/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486488 0001 EA 303.000
NSN/MATERIAL:5306016074479
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
SPE4A6-26-T-06RL
SECTION B
PR: 7017486488 PRLI: 0001 CONT’D
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:01/10/2027 Original Required Delivery Date:05/02/2028
SPE4A6-26-T-06RL NSN/Part Number: 5306-01-607-4479 Quantity: 303 EA Purchase Request: 7017486488QTY: 303 Delivery: 170 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract pertains to the procurement of 12 shear bolts, identified by NSN 5306-01-583-4912 and part number NAS1956-26, manufactured in compliance with the non-government standard NAS1953THR and NAS1970 Revision 7 dated 01/30/2015, and referenced against NAS9925. All hardware must meet the current revision of the governing part standard, with past manufacturing versions being acceptable only if they were compliant at the time of production. Critical thread attributes must be gaged per SAE AS8879 Category 1 or MIL-S-7742 Safety Critical Threads, excluding self-locking nuts and threads below specified diameters. Inspection and acceptance occur at origin under a zero-defect sampling plan, employing MIL-STD-1916 or equivalent zero-based methodology, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Identification marking follows MIL-STD-130N paragraph 4.1.b(2), augmented by manufacturer logos, lot numbers, and material identifiers. Packaging must adhere to ASTM D3951 and MIL-STD-129 for labeling and marking, with palletization conforming to DLA’s packaging requirements. Delivery is FOB destination within five days of contract award, with no variance allowed in quantity. The shipment destination is FPO AP 96306-2739, with a freight shipping address in Japan, and the required delivery date is July 15, 2026. This item is classified as a critical application, subject to stringent quality controls and oversight by the Department of Defense under solicitation SPE4A0-26-T-3890.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract covers the procurement of 677 units of screw, cap, socket head, identified by NSN 5305-00-052-1488 and part number MS21096-06001, manufactured in accordance with NASM21096 Revision 1 and NASM9006 Revision 2. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification of bare items. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 while fully complying with DLA Master List requirements and MIL-STD-129 for marking and labeling, with palletization following RP001 standards. Delivery is FOB origin with a 123-day lead time, required by January 3, 2027, and inspection and acceptance occur at the destination. The unit of issue is each, with no quantity variance permitted. The delivery address is DLA Distribution Jacksonville, and transportation details conform to DLAD Proc Note C19 and C20. The solicitation number is SPE4A6-26-T-06SE, issued on July 15, 2026, with a response deadline of July 23, 2026, under NAICS code 332722, managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract specifies the procurement of close tolerance screws identified by part number NAS1153-5 and NSN 5305009840633, with a unit of issue of HD (100 each per package). The item is classified as a commercial item and must comply strictly with the current revision of the NAS1151 through NAS1158 standards, Revision 17 dated 11/30/2024. All manufacturing must adhere to the latest applicable standard, though previously manufactured hardware conforming to earlier, then-current revisions remains acceptable. Inspection and verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise specified. Thread dimensional compliance for Class 3A and 3B threads must be verified per System 22 of FED-STD-H28/20, excluding small internal and external threads. Critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA Master List of Technical and Quality Requirements, and all units must be marked and labeled per MIL-STD-129. Palletization follows DLA’s RP001 packaging requirements, and item identification shall align with MIL-STD-130N, paragraph 4.1.b(2), in addition to manufacturer, lot, and material markings. The contract includes two line items totaling 535 HD units, with delivery points at Albany, GA and Corpus Christi, TX. Both shipments are FOB origin, with inspection and acceptance occurring at destination. Quantity variance is strictly 0%, and the required delivery date is March 26, 2027, with ship dates mandated by July 17, 2026, and December 23, 2026. The solicitation number is SPE4A6-26-T-06QR, issued under NAICS code 332722 by the Department of Defense’s ASC Commodities Division, with Lisa Harvie designated as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 1,456 flat washers with NSN 5310-01-096-7389 under solicitation SPE4A6-26-T-06RY, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days after award, and responses must be submitted by July 23, 2026. The item is subject to a range of technical, quality, and security requirements mandated by the DLA Master List of Technical and Quality Requirements, with specific controls tied to the solicitation’s issue date. Cybersecurity compliance includes a CMMC Level 2 self-assessment or certification through an accredited third-party assessment organization. Packaging must adhere to DLA guidelines, and all items must be physically marked as per RQ017 unless otherwise specified. The technical data associated with this item is classified under export control regulations, either ITAR or EAR, restricting disclosure to foreign persons or entities without prior authorization. Access to this controlled data is limited to contractors approved by DLA, who hold a valid US/Canada Joint Certification Program certification, have completed mandatory export control training, and have been officially granted access. Additionally, government identification must be removed from non-accepted supplies, and the place of performance is identified as Anniston, Alabama, with Daniel Fink as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAROfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and manufacturing processes for this solicitation. The contractor is prohibited from providing covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016, and must affirmatively represent compliance. Domestic material restrictions under the Berry Amendment, Buy American Act, and related clauses apply with a reduced threshold of $150,000; any non-domestic materials require full disclosure to the point of contact. Offers must not include items produced via additive manufacturing unless prior written approval is obtained, and such submissions will be deemed non-responsive without it. Small business joint ventures must submit specific certifications under FAR provisions 52.212-3 and 52.219-1 for eligibility categories including small business, service-disabled veteran-owned, women-owned, and HUBZone statuses. Due to fluctuating demand, offerors are strongly urged to provide range-based pricing rather than fixed quantities to allow flexibility in award decisions without resolicitation. Fast Pay is not available for this solicitation. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability; those using VSM WebServices must update their internal schema by the specified date or lose access. A No Bid submission is encouraged if quoting after the closing date to avoid assumptions of non-responsiveness. The item under solicitation is a bolt, shear, with an NSN of 5306-01-185-0572 and a requirement for 38 units, with a delivery deadline of 20 days after order placement and a response deadline of July 23, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details