Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-05VTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of 200 shear bolts, part number MS21250H06010, under the NSN 5306009291690, for delivery to DLA Distribution in Corpus Christi, Texas, with a required delivery date of September 18, 2027, and a lead time of 171 days. The item is governed by technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking compliance with MIL-STD-129, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated; attributes are assigned verification levels or AQLs as defined, and manufacturers may choose attribute or variable inspection methods. The bolt is designated a critical application item and must strictly comply with NASM21250 Revision 2 and NASM8831 Revision 5 specifications. Mercury and mercury-containing compounds are prohibited in the item, packaging, preservation, and marking, except for specified functional uses such as in batteries, fluorescent lights, sensors, or weapon systems, with portable lamps and instruments requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Delivery is FOB origin, inspection and acceptance occur at destination, and no quantity variance is permitted. Packaging and palletization adhere to DLA-specific procedures, and transportation details are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-05VT, with a total price of $200.00 per unit, and is managed by the Department of Defense’s ASC Commodities Division.

General Info

200 shear bolts, MS21250H06010, due Sept 18, 2027, FOB origin, $200/unit, strict NASM and MIL-STD compliance, no mercury, zero defects allowed.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

DDCT-S 540 FIRST STREET SE, CORPUS CHRISTI, TX, 78419-5255, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05VT.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Jeremy Stokes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT, SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SPE4A6-26-T-05VT
SECTION B
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM21250 REVISION NR 2 DTD 12/20/2013 PART PIECE NUMBER: MS21250H06010
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD NASM8831 REVISION NR 5 DTD 04/28/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486965 0001 EA 200.000
NSN/MATERIAL:5306009291690
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:025 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
DDCT-S 540 FIRST STREET SE
CORPUS CHRISTI TX 78419-5255
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-05VT
SECTION B
PR: 7017486965 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
GPS USE 100 NAS DR PH 361 431 3728
540 FIRST STREET SE BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
Need Ship Date:01/10/2027 Original Required Delivery Date:09/18/2027
SPE4A6-26-T-05VT NSN/Part Number: 5306-00-929-1690 Quantity: 200 EA Purchase Request: 7017486965QTY: 200 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
BOLT, MACHINEThe contract specifies the procurement of 1,171 machine bolts identified by NSN 5306-00-452-4977 under solicitation SPE4A6-26-T-05VC, with a total price of $1,171.00 at $1.00 per unit. Delivery is required FOB origin within 171 days, with zero variance allowed in quantity, and inspection and acceptance occurring at the manufacturer’s origin. All items must conform to the current revision of the applicable part standard, BSI BS 4A104, and must be manufactured in accordance with TDP Rev A Gen 1. Surface marking requirements mandate the material symbol, manufacturer’s symbol, and lot number; if space is insufficient on fasteners under 1/2 inch diameter, markings must follow a strict precedence order and may be applied to packaging. Gauging for Class 3A and 3B threads must follow System 22 of FED-STD-H28/20, excluding small internal and external threads. The item is designated as a critical application, subject to stringent quality controls including sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. All hardware must bear identification markings in alignment with MIL-STD-130N in addition to required manufacturer and lot markings. Packaging must comply with MIL-STD-2073-1E, with unit packaging, preservation, and container specifications defined, and shipping labels must follow MIL-STD-129. Palletization adheres to DLA packaging requirements, and the delivery destination is DLA Distribution Cherry Point in North Carolina. The solicitation is a total small business set-aside under NAICS code 332722, with responses due by July 22, 2026, and a required ship date of January 10, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for 525 machine screws identified by NSN 5305-00-071-2089 and part number MS51957-89, classified as a commercial item and designated as a critical application item. It mandates strict adherence to MIL-STD-130N for physical identification and bare item marking, in addition to manufacturer logos, lot numbers, and material identifiers. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization conforming to RP001, and all items must be marked and labeled accordingly. The item is to be delivered FOB origin in 171 days, with no variance allowed in quantity, and inspected and accepted at the destination. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, adhering to specific transportation protocols outlined in DLAD Proc Notes C19 and C20. The contract references a baseline specification MS51957G Revision G dated 04/14/2025 and includes a requirement for full traceability through approved documentation. The solicitation number is SPE4A6-26-T-05UY, with a response deadline of July 22, 2026, and the required delivery date is March 25, 2027, with a needed ship date of January 10, 2027. The unit of issue is each, priced at $0.00 per unit with no total price listed, indicating the contract is based on a fixed quantity with pricing established under government acquisition mechanisms.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLTThe contract pertains to the procurement of one bolt identified by NSN 5306-99-727-7067 under solicitation SPE4A6-26-T-06GR, with a required delivery within ten days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in samples unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size. The contract is issued by the Department of Defense’s ASC Commodities Division, with performance at Fort Riley, Kansas, and primary point of contact Duane Watkins, reachable via email and phone provided. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract specifies the procurement of 4 packing groups (PG) of machine screws, with each packing group containing 100 screws, for a total of 400 units, identified by NSN 5305-01-502-9210 and part number 91771A247 from McMaster-Carr Supply Co. Delivery is required within 20 days under FOB origin terms with a required delivery date of February 25, 2025, and no variance in quantity is permitted. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards, and must be inspected at destination with zero non-conformances accepted unless otherwise stated. Sampling must follow MIL-STD-1916 or ASQ H1331 with verified acceptance levels of VII for critical, IV for major, and II for minor attributes, or use of AQLs 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA packaging rules. The item must be shipped using the fastest traceable means, explicitly excluding parcel post. Freight delivery is to the Naval Construction Battalion Center in Gulfport, Mississippi, while the parcel post address serves only for documentation purposes. All packaging and marking must include proper government identification and comply with DLA’s identification and traceability directives. Contract-specific identifiers, including solicitation number SPE4A6-26-T-06HF, procurement request 7017444469, and government use codes, are embedded for administrative tracking, with point of contact Charece Smith available for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CAP, PROTECTIVE, DUST ANThe contract specifies the procurement of four protective dust and moisture seals with NSN 5340-01-587-8356, each priced at $4.00 for a total value of $16.00, under solicitation SPE7L1-26-T-833X. Delivery is required within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the final delivery point. All items must be packaged in strict compliance with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951; if the material is non-hazardous under FED-STD-313, it must be commercially packaged per ASTM D3951, otherwise sealed per TQ requirement IP025. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 standards. The unit of issue is each, with one unit per pack, and all shipments must use the designated freight address in Abu Dhabi, UAE, with no mail service permitted. The required delivery dates range from July 9 to July 13, 2026, and the government point of contact is Kristina Derry at DLA. The item is classified under NAICS 332722 and is managed by the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details