This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
BOLT, SHEAR
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract covers the procurement of 92 units of shear bolts, identified by NSN 5306-00-291-5194 and part number ST3M571-8D44, under solicitation SPE4A6-26-T-73D7 issued by the Department of Defense’s ASC Commodities Division. The delivery is required within 44 days to the DLA Distribution Center at Warner Robins Air Force Base, Georgia, with an original required delivery date of March 3, 2028. Packaging and marking must comply with detailed military standards, including ASTM D3951, MIL-STD-129, and additional DLA packaging requirements, ensuring proper identification and preservation through distribution. The contract enforces strict quality assurance provisions such as sampling methods adhering to MIL-STD-1916 or equivalent plans, and requires strict control over configuration changes and physical identification due to the critical application nature of the item. The document also highlights exceptions to specific drawing standards relevant to the shear bolts, and references master lists and technical quality requirements available from the Defense Logistics Agency website, which dictate the applicable revisions and standards in effect at contract award. Several approved manufacturers and part numbers are listed, allowing for procurement flexibility. Acceptance and inspection points are set at destination, with a zero-tolerance policy for nonconformance within sampled lots. The contracting office provides a primary contact for further communication and guidance, ensuring compliance with all requirements for this specialized fastener critical to defense applications.
General Info
Agency
NAICS
Place of Performance
BLDG 376, ROBINS A F B, GA, 31098-1887, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
BOLT SHEAR
The following exceptions to DWG ST3M751-8D44 apply: FOR ST3M571; Remarks: -8D44 CONFIGURATION FOR ST3M572; Remarks: NOT REQUIRED FOR 6M148; Remarks: NOT REQUIRED FOR 200415485; Remarks: NOTES 1, 3, 4, AND 12 APPLY.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HOWMET GLOBAL FASTENING SYSTEMS INC 06950 P/N VS3060-8D44
VALLEY-TODECO, INC. 06710 P/N VAL23033-8D44
SPE4A6-26-T-73D7
SECTION B
HOUSTON PRECISION FASTENERS I LP 1VSL7 P/N ST3M571-8D44
SATURN FASTENERS INC 0K6Z0 P/N ST3M571-8D44
TWIST TITE MFG, INC 007R1 P/N ST3M571-8D44
THE BOEING COMPANY 76301 P/N ST3M571-8D44
FASTENER INNOVATION TECHNOLOGY, INC. 58998 P/N ST3M571-8D44
SPS TECHNOLOGIES LLC 27624 P/N ST3M571-8D44
SPACE-LOK, INC. 16258 P/N SLB253-8D44
SONIC INDUSTRIES, INC. 57928 P/N S11-1059-8D44
LISI AEROSPACE CANADA CORP DIV HI L4528 P/N MB84-8D44
HI-SHEAR CORPORATION 73197 P/N MB84-8D44
HEARTLAND PRECISION FASTENERS INC 0ZC92 P/N HP7571-8D44
B & B SPECIALTIES INC 1EM77 P/N GS1030-8D44
HUCK INTERNATIONAL, INC 17446 P/N BM3326-8D44
SPS TECHNOLOGIES, LLC 06725 P/N AIC52-8D44
SPS Technologies, LLC DBA 80539 P/N 74328-8D44 SPS TECHNOLOGIES, LLC 56878 P/N 74328-8D44 REID PRODUCTS INC. 59563 P/N 11831-8D44
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016475644 0001 EA 92.000
NSN/MATERIAL:5306002915194
DELIVERY (IN DAYS):0044
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
SPE4A6-26-T-73D7
SECTION B
PR: 7016475644 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:07/20/2026 Original Required Delivery Date:03/03/2028
SPE4A6-26-T-73D7 NSN/Part Number: 5306-00-291-5194 Quantity: 92 EA Purchase Request: 7016475644QTY: 92 Delivery: 44 days ADO