BOLT, SHEAR

The contract specifies the procurement of 784 units of BOLT, SHEAR with part number NAS1106-16, governed by non-government standards NAS1103 through NAS1120 Revision 11 and NAS4002 Revision 12. All items must comply with the current revision of the applicable standard at the time of manufacture, with prior revisions accepted only for previously manufactured hardware. Inspection and acceptance occur at origin, and the item is classified as a commercial item with critical application requirements. Dimensional conformity for all Class 3A and 3B threads must be verified per System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Marking requirements mandate compliance with MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer identifiers, and physical identification must meet RQ017 specifications. Packaging adheres to ASTM D3951 but is subordinate to DLA Master List requirements, with all units labeled and palletized per MIL-STD-129 and RP001. Unit of issue is EA, delivered FOB origin within 74 days to DLA Distribution San Joaquin in Tracy, California with no quantity variance permitted. The contract was issued with a solicitation date of April 28, 2026, and response deadline of May 6, 2026, with the original delivery requirement set for November 29, 2027, and a need ship date of July 20, 2026.