Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-05XFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of 269 shear bolts designated as special high-strength fasteners for use by the Department of Defense aviation community. The items must be manufactured, tested, and inspected in strict compliance with required technical data and referenced specifications, with all Class 3A and 3B threads subject to dimensional conformity inspection per System 22 of Fed-Std-H28/20, excluding self-locking nuts and threads below specified diameters. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. All items require physical identification and bare item marking as specified. The solicitation, numbered SPE4A6-26-T-05XF, was posted on July 14, 2026, with responses due by July 22, 2026, and delivery is required within 171 days after delivery order issuance to New Cumberland, Pennsylvania, under NAICS code 332722. Primary point of contact is Tyler Greene of the ASC Commodities Division, Department of Defense.

General Info

Procurement of 269 high-strength shear bolts for DoD aviation, compliant with Fed-Std-H28/20, delivered to New Cumberland within 171 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05XF.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tyler Greene
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
,,BOLT SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
THIS ITEM IS DESIGNATED AS A SPECIAL HIGH STRENGTH FASTENER AND IS
REQUIRED TO SUPPORT THE DoD AVIATION COMMUNITY
ARTICLES TO BE FURNISHED HEREUNDER SHALL BE MANUFACTURED, TESTED AND INSPECTED IN ACCORDANCE WITH REQUISITE TECHNICAL DATA, AND ALL DETAILS AND SPECIFICATIONS REFERENCED THEREIN.
SUPPLEMENTAL REQUIREMENTS
A. ADDITIONALLY, STRESS DURABILITY TESTING COMPLETED FOR THE NSN/Part Number: 5306-01-133-7195 Quantity: 269 EA Purchase Request: 7017487135QTY: 269 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
ROD, CONTINUOUS THREThe contract pertains to the procurement of a continuous threaded rod, identified by NSN 5306-01-624-0183 and part number H7254534-1, with a quantity of 185 units delivered FOB origin under solicitation SPE4A1-26-T-2444. Delivery is required within 171 days, with an original delivery date of December 29, 2026, and a needed ship date of January 10, 2027. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using preservation methods specified under QUP 001, with no special marking required. Packaging and preservation materials must be free of mercury or mercury-containing compounds, in accordance with DLA’s prohibition under IP056, with exceptions limited only to functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or reagents specified by NAVSEA, which must also meet additional containment standards per NAVSEA 5100-003D. The delivery destination is the DLA Distribution DDSP New Cumberland facility in New Cumberland, Pennsylvania, with all shipments governed by DLA’s transportation protocols C19 and C20. The contract enforces zero variance in quantity, with inspection and acceptance occurring at destination, and references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications tied to R or I identifiers. Unit of issue is each, with a unit price of $185.00, totaling $34,225.00, and the procurement falls under NAICS code 332722.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThis contract specifies the procurement of 20 self-locking nuts, part number 5310-01-707-4996, under solicitation SPE4A6-26-T-06FG, with a required delivery date of March 7, 2027, and a delivery lead time of 171 days. The items must be delivered FOB origin to the designated receiving warehouse in Tracy, California, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including preservation methods, material specifications, and marking per MIL-STD-129. No special marking is required. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking materials, except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, which must meet additional containment and safety standards per NAVSEA 5100-003D. All portable fluorescent lamps and instruments containing mercury must have shock-proof design and a secondary containment boundary. Quality assurance provisions require sampling to be conducted in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Attributes not otherwise specified are treated as major. Source approval documentation must satisfy RC001 requirements, and all supplies must be physically identified per RQ017, with RIX Industries identified as the manufacturer under part number 53-4113. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements accessible via the provided URL, with the applicable revision determined by the solicitation or award date. The contract is subject to DLA transportation and freight handling procedures, and the unit of issue is each, aligned with ANSI X12 standards. The primary point of contact is Dana Barefoot, and the solicitation was posted July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract specifies the procurement of a close tolerance screw with NSN 5305-01-483-4778 and part number 120-225V08-08, designated as a critical application item for Bell Textron Inc. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Manufacturing may require casting or forging, and bidders must submit a Casting and Forging Assistance Request if they lack the necessary tooling or materials. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned strict verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and all supplies must adhere to DLA packaging requirements per RP001 and MIL-STD-2073-1E with marking compliant to MIL-STD-129 and no special marking codes applied. Unit of issue is each, with a fixed quantity of 15 units, no variance allowed, and delivery is FOB origin with inspection and acceptance occurring at destination. The item must be delivered within 171 days of the contract award, with the required delivery date set for January 10, 2028, and the need ship date listed as January 10, 2027. Packaging is to be palletized per DLA guidelines and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transportation protocols outlined in DLAD Proc Notes C19 and C20. Government identification is not required on non-accepted supplies per RQ011, and Item Unique Identification is waived per DFARS 252.211-7003.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESSThis contract pertains to the procurement of one unit of a component identified by NSN 5340015588604 and part number 4930847 from CUMMINS INC, with a required delivery within five days of contract award. The item must be delivered FOB origin with no tolerance for quantity variance, inspected and accepted at the destination, and packaged strictly in accordance with DLA’s packaging requirements, which supersede general commercial standards. Packaging must comply with MIL-STD-129 for labeling and marking, and if the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, ASTM D3951 applies, subject to DLA technical requirements taking priority. The delivery destination is the Letterkenny Army Depot in Chambersburg, Pennsylvania, with shipping mandated to occur via the fastest traceable method, explicitly prohibiting parcel post. All packaging and palletization must adhere to RP001 standards, and the unit of issue is a single unit. The contract references the DLA Master List of Technical and Quality Requirements, which govern all technical and compliance specifications. The required delivery date is July 14, 2026, with the solicitation issued under contract number SPE7L1-26-T-833S, managed by the Department of Defense’s Land Supply Chain, and the primary point of contact is Michael Nordahl via DLA email and phone.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, BLThe contract specifies the procurement of 354 self-locking blind rivet nuts, part number NAS1735-5L3P, compliant with National Aerospace Standards and manufactured to the current revision of the defining standard. The item is classified as a critical application component and must adhere to stringent quality and identification requirements, including MIL-STD-130N marking for government identification beyond manufacturer logos and lot numbers. All hardware must meet the latest revision of the specification, with prior revisions accepted only for inventory already in production prior to the solicitation date. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels are assigned based on attribute criticality. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 requirements, and all packaging must be properly labeled and marked as directed. The item is subject to the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Delivery is FOB origin with no quantity variance allowed, inspection and acceptance occurring at destination, and the required delivery date is 121 days after contract award. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and the contract is issued under solicitation SPE4A6-26-T-05WK with a purchase request number 7017486887 and NSN 5310-01-058-3979.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details