Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-05XDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 1,161 shear bolts, identified by NSN 5306-01-053-9776 and part number NAS6603D8, classified as a critical application item. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality requirements, inspection and acceptance protocols at origin, and physical marking specifications per MIL-STD-129. Quality conformance is verified through a Certificate of Quality Compliance and adherence to MIL-STD-1916 or ASQ H1331 sampling plans, with critical attributes requiring verification at level VII or AQL 0.1. Packaging must meet MIL-STD-2073-1E and DLA-specific packaging requirements, with palletization and marking conforming to established codes and formats. The unit of issue is each, with no variance permitted in quantity. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 287-day delivery window. The designated delivery point is the DLA Distribution Depot in Tinker AFB, Oklahoma, with the original required delivery date set for September 12, 2027. All documentation, including the Technical Data Package and required CDRLs, must be reviewed for full compliance, and the item is subject to government quality control processes including removal of government identification from non-accepted supplies.

General Info

Procurement of 1,161 critical shear bolts with strict quality, packaging, and delivery standards to Tinker AFB by September 12, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05XD.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
David Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT, SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SPE4A6-26-T-05XD
SECTION B
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev D Gen 4 IAW BASIC NON GOVT STD NAS6603 THRU NAS6620 REVISION NR 11 DTD 12/31/2025 PART PIECE NUMBER: P/N NAS6603D8
TDP Rev D Gen 4 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486881 0001 EA 1,161.000
NSN/MATERIAL:5306010539776
DELIVERY (IN DAYS):0287
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:B
UNIT CONT:BD OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
SPE4A6-26-T-05XD
SECTION B
PR: 7017486881 PRLI: 0001 CONT’D
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:05/05/2026 Original Required Delivery Date:09/12/2027
SPE4A6-26-T-05XD NSN/Part Number: 5306-01-053-9776 Quantity: 1,161 EA Purchase Request: 7017486881QTY: 1161 Delivery: 287 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
WASHER, FLATThe contract specifies the procurement of 25 flat washers identified by NSN 5310-01-718-7684 and part number 8843805-44 under solicitation SPE4A6-26-T-06EQ, requiring full compliance with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item must meet applicable military standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging methods including preservative treatment code 10 and unit packaging code U, and palletization must adhere to DLA’s packaging requirements. The item is to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with no variance allowed in quantity. Inspection and acceptance occur at destination, and the contract mandates strict adherence to government handling procedures, including removal of government identification from non-accepted supplies and bare item marking. Delivery is due to be completed by January 10, 2027, with the original required delivery date set for November 15, 2026, and the contract includes detailed transportation and shipping instructions as outlined in DLA procedural notes.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLTThe contract pertains to the procurement of one bolt identified by NSN 5306-99-727-7067 under solicitation SPE4A6-26-T-06GR, with a required delivery within ten days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in samples unless otherwise stated, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size. The contract is issued by the Department of Defense’s ASC Commodities Division, with performance at Fort Riley, Kansas, and primary point of contact Duane Watkins, reachable via email and phone provided. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract specifies the procurement of 4 packing groups (PG) of machine screws, with each packing group containing 100 screws, for a total of 400 units, identified by NSN 5305-01-502-9210 and part number 91771A247 from McMaster-Carr Supply Co. Delivery is required within 20 days under FOB origin terms with a required delivery date of February 25, 2025, and no variance in quantity is permitted. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards, and must be inspected at destination with zero non-conformances accepted unless otherwise stated. Sampling must follow MIL-STD-1916 or ASQ H1331 with verified acceptance levels of VII for critical, IV for major, and II for minor attributes, or use of AQLs 0.1, 1.0, and 4.0 respectively. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA packaging rules. The item must be shipped using the fastest traceable means, explicitly excluding parcel post. Freight delivery is to the Naval Construction Battalion Center in Gulfport, Mississippi, while the parcel post address serves only for documentation purposes. All packaging and marking must include proper government identification and comply with DLA’s identification and traceability directives. Contract-specific identifiers, including solicitation number SPE4A6-26-T-06HF, procurement request 7017444469, and government use codes, are embedded for administrative tracking, with point of contact Charece Smith available for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVETThis contract pertains to the procurement of PIN-RIVET, THREADED, with the NSN 5320-01-469-4477 and part number BACB30VT10K6, requiring a quantity of 695 units at a unit price of $695.00, for a total contract value of $482,725. The item is designated as a critical application component, and compliance with the DLA Master List of Technical and Quality Requirements is mandatory, overriding any other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001, with palletization following DLA-specific guidelines, and all markings must adhere to specified regulatory requirements. The contract stipulates FOB origin delivery with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The required delivery window is 171 days from the contract date, with a firm need ship date of January 10, 2027, and an original delivery deadline of March 5, 2027. The item must be shipped to DLA Distribution San Diego at the designated logistics address, with transportation subject to DLAD Proc Notes C19 and C20. Only qualified manufacturers and non-manufacturers listed in the contract, including SPS Technologies, Howmet Global, Huck International, Hi-Shear, and The Boeing Company, are authorized suppliers of this part. The procurement is governed under solicitation SPE4A6-26-T-06CB, with the response deadline having passed on July 22, 2026, and the primary point of contact is Debra Fowler at DLA.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDERThe contract is for 559 shoulder screws, part number 4100-001 by Jaidinger Mfg Co Inc, identified by NSN 5305003404693 and referencing drawing 328AS262 Revision B dated 07/20/1990, with specific dimensions of #8.164 inch - 32 UNC-2A x 0.484 inch minimum to 0.516 inch maximum. This is a critical application item subject to strict technical and quality controls as defined by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required for acceptance unless otherwise stipulated, and attributes are assigned verification levels based on criticality. Configuration changes require an Engineering Change Proposal and any variance requests must be formally submitted. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 requirements. All items must be marked per physical identification guidelines and government identification removed from non-accepted supplies. Delivery is FOB origin with inspection and acceptance at destination within 60 days of contract award, and the shipment must be delivered to DLA Distribution San Diego by July 13, 2026, with a required delivery date of February 1, 2027. The quantity variance is strictly zero percent. The contract is issued under solicitation SPE4A6-26-T-05UN with a response deadline of July 22, 2026, and is managed by the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details