This Solicitation opportunity from Department Of Defense was posted on September 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BOLT, SHEAR

Closed

SPE4A7-26-T-775QFederal

Submission Closed09/28/2026, 10:00:00 AM PDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

Federal

HARDWAREThis forecast for hardware procurement is issued by Federal Prison Industries under the Department of Justice. The opportunity is designated as a Small Business Total Set-aside and is categorized under NAICS code 332722. The work is slated to be performed in Brooklyn, New York, with Edsal Machine Products, Inc. listed as the incumbent contractor. The solicitation was posted on November 8, 2026. Interested parties may coordinate with Stacey Phipps or Small Business Specialist Robert L. Connolly for further information. Additional details regarding this contracting opportunity can be found through the Department of Justice forecast portal.

Inc Federal Prison Industries

POSTED

DEADLINE

Supply of Plain Cap Nuts (NSN 5310-01-3490759)This subcontract involves the manufacture or procurement of 2,757 plain cap nuts under NSN 5310-01-3490759 for prime contractors supporting Department of Defense projects. These components are designated as Critical Application Items and must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed by the DLA Weapons Support ASC Commodities Division with performance located in Texarkana. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-658-7242)This subcontract involves the procurement and delivery of 113 units of Hexagon Head Cap Screws, identified by NSN 5305-01-658-7242, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The hardware must strictly adhere to all provided technical drawings and specifications to ensure compliance with Department of Defense standards. The completed order must be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. All units are required to be delivered by the final deadline of April 10, 2027.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Shear BoltsThis subcontract involves the manufacture and supply of 20 specialized shear bolts, part number NAS6208-50, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate the bolts according to the current NAS6208-50 part standard, ensure physical identification and bare item marking comply with MIL-STD-130N paragraph 4.1.b(2), and follow ASTM D3951 packaging guidelines. The project falls under NAICS code 332722 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Critical Application Socket Head Cap ScrewsThis subcontract involves the supply of high-precision socket head cap screws for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for manufacturing or sourcing part number 3392AS737-17, ensuring strict adherence to TDP Rev B Gen 3 and Basic Drawing NR 30003 3392AS737 Revision V. The scope of work includes the delivery of one unit of NSN 5305015725242, which must be certified as a Critical Application Item and processed with packaging and labeling that meets MIL-STD-129 standards. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 332722. The place of performance is designated as MCBH Kaneohe Bay. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Finned Neck BoltsThis subcontract involves the manufacture and supply of 1,408 finned neck bolts, identified by NSN 5306013631749, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the use of precision machining equipment to achieve specific finned neck geometries. All units must undergo sampling and inspection according to MIL-STD-1916 or ASQ H1331, with marking and packaging adhering to RQ017, MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. The finished and packaged bolts are to be delivered to DLA Distribution Barstow in California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Retainer, Nut and Bolt SupplyThis subcontract, titled Retainer, Nut and Bolt Supply, involves the manufacture or sourcing of 174 units of specialized retainer hardware, including nuts and bolts, to support prime contractors for the DLA Weapons Support Land Supply Chain under the Department of Defense. The scope of work requires strict adherence to packaging and labeling standards, specifically TQ requirement IP025 for hazardous materials, ASTM D3951 for non-hazardous materials, and MIL-STD-129 and RP001 for palletization and labeling. The completed hardware must be delivered to the designated DLA site located at Robins Air Force Base. The contract falls under NAICS code 332722, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Flat Washers (NSN 5310-01-719-2997)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 1,560 flat washers identified by NSN 5310-01-719-2997. The items must be manufactured or sourced in accordance with the DLA Master List of Technical and Quality Requirements RA001 and delivered FOB Origin. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in New Cumberland. Strict adherence to quality and regulatory standards is mandatory, including quality assurance per MIL-STD-1916 or ASQ H1331 and packaging requirements following MIL-STD-2073-1E and MIL-STD-129. Additionally, the contractor must ensure full compliance with the Buy American Act and provide certification that the supplied washers are mercury-free.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Loop Clamp and Mounting Bracket SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, involves the manufacture and supply of loop clamps and mounting brackets specifically associated with NSN 5340016020072. The selected provider will support prime contractors on Defense Logistics Agency supply contracts, ensuring all physical components are delivered in accordance with strict technical data requirements found in DLA PCF folders. The contract is designated as a Total Small Business Set-Aside under NAICS code 332722. Compliance is mandatory regarding the Buy American and Balance of Payments Program origin requirements, as well as specific military standards for packaging and marking, namely MIL-STD-2073-1E and MIL-STD-129. The response deadline for this opportunity is November 20, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Precision Manufacturing of Close Tolerance Screws (NAS1994C4T)This subcontract involves the precision manufacturing of 633 close tolerance screws for the DLA Weapons Support ASC Commodities Division. The components must be produced via precision machining or cold-heading to meet NSN 5305016005925 and NAS1994C4T specifications, with a strict prohibition on the use of additive manufacturing. All delivered units must be finished, inspected, and marked according to the required standards. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification and maintain DFARS cybersecurity compliance. The work is associated with NAICS code 332722 and will be performed at Robins Air Force Base. Responses to this requirement are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

Solicitation SPE4A7-26-T-775Q is a HUBZone set-aside request for quotations issued by the Department of Defense, specifically the DLA Aviation ASC, for the procurement of shear bolts under NAICS code 332722. The requirement includes a total quantity of 26 units with a delivery timeline of 756 days after award. This item is designated as a Navy Critical Safety Item, requiring strict quality management compliance with SAE AS9100 and adherence to zero-based sampling plans. Inspection and acceptance will occur at the origin, and the contractor must utilize the Wide Area WorkFlow system for electronic invoicing and payment. A critical component of this procurement is the First Article Testing requirement. The contractor must deliver two units to the Fleet Readiness Center East in Cherry Point, North Carolina, within 30 calendar days of the contract date. The government will notify the contractor of approval or disapproval within 180 days of receipt. The cost of government testing, estimated at 9,999 dollars, will be factored into the evaluation of offers. Additionally, the contractor is required to provide ten random samples from production lots for testing, and any failure of these samples will result in the failure of the entire production lot. Packaging must comply with MIL-STD-129 and hazardous materials must be labeled according to the Hazard Communication Standard.

General Info

DoD HUBZone contract for 26 Navy critical safety shear bolts with first article testing.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

HZC

Documents

24 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedSep 21

Solicitation

Notice updatedSep 21

The notice title changed. The notice description changed.

Notice updatedSep 21

The notice title changed. The notice description changed.

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 10:00:00 AM PDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUSA

Contacts

Naron Sanderlin

contact@example.gov

+1 (555) 000-0000

Full Description

OF THE SOLICITATION, SELECT
‘OTHER EQUIVALENT' AND PROVIDE DETAILS OF CURRENT DEALER/DISTRIBUTOR
CERTIFICATION AND/OR ACCREDITATION.
Fast Pay does not apply to this solicitation
FIRST ARTICLE APPROVAL – GOVERNMENT TESTING REQUIRED (FAR 52.209-4 AND
ALT I)
THE CONTRACTOR SHALL DELIVER 2 UNIT(S) OF
LOT/ITEM 5306 / 12505237
WITHIN 30 CALENDAR DAYS FROM THE DATE OF
THIS CONTRACT TO THE GOVERNMENT AT THE LOCATION SPECIFIED BELOW FOR
FIRST ARTICLE TESTS.
N65923
FLEET READINESS CENTER EAST
RECEIVING OFFICER
BLDG 148, BAY C
BEACHEY ROAD
CHERRY POINT
NC
28533-5040
WITHIN 180 CALENDAR DAYS AFTER THE GOVERNMENT
RECEIVES THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE
CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR
DISAPPROVAL OF THE FIRST ARTICLE.
DISPOSITION OF FIRST ARTICLES:
SPE4A7-26-T-775Q
SECTION A
Procurement Note E01: Supplemental First Article Exhibit Disposition Contractor Maintained (MAY 2020)
The first article units will be maintained or returned to the contractor to be used as a manufacturing standard. The contractor shall hold the approved first article units at the production facility until all production quantities have been produced and accepted. In the case of indefinite delivery contracts, the contractor shall hold the first article units until final production run has been approved and accepted on the first delivery order. The unit shall be considered a production guide or manufacturing standard if defects are reported on delivered material or problems are encountered during production. When disposing the units, the contractor shall follow DFARS 252.245-7004(d).
Procurement Note M04: NSN/Part Number: 5306-01-250-5237 Quantity: 26 EA Purchase Request: 7018248763QTY: 602 Delivery: 756 days ADO