Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A0-26-T-4051Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a shear bolt with part number BACB30NN4K44 and NSN 5306016596412, issued under solicitation SPE4A0-26-T-4051 by the Department of Defense via the Defense Logistics Agency. The item is classified as a critical application component and must be supplied by approved manufacturers including 3-V Fastener Co. Inc., Huck International Inc., SPS Technologies LLC, and The Boeing Company. All deliverables must comply with stringent technical and quality requirements referenced in the DLA Master List, including packaging specifications per MIL-STD-2073-1E and marking standards per MIL-STD-129. The item requires supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016, though unique item identification is not mandated. Sampling must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The bolt also requires FAA airworthiness approval per RQ019 and must meet FAA bare item marking requirements. Delivery is FOB origin with a fixed five-day delivery window, no quantity variance allowed, and inspection and acceptance occurring at destination. Packaging, palletization, and shipping must adhere to DLA and FAA guidelines, with shipments prohibited from parcel post and required to be sent via fast, traceable means to Travis Air Force Base, California. The contract includes two line items totaling four units, each priced at $1.00 and $3.00 respectively, with a required delivery date of July 16, 2026.

General Info

Procurement of three shear bolts NSN 5306-01-659-6412 via DLA competitive solicitation due August 3, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

PR: 7017492884 PRLI: 0001 CONT’D, TRAVIS AFB, CA, 94535-2918, US

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4051.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT,SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ046: FAA Bare Item Marking Requirements
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
REFER TO PROC NOTE L32 FOR HIGHER LEVEL QUALITY REQUIREMENTS
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for
SPE4A0-26-T-4051
SECTION B
additional information. Certificate of Airworthiness and Conformance for FAA Certified Parts and Commercial Derivative Aircraft Parts
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
Refer to Proc Note L32 for higher level quality requirements
CRITICAL APPLICATION ITEM
3-V FASTENER CO., INC. 1ER65 P/N BACB30NN4K44 HUCK INTERNATIONAL, INC 17446 P/N BACB30NN4K44 SPS TECHNOLOGIES, LLC 06725 P/N BACB30NN4K44 THE BOEING COMPANY 81205 P/N BACB30NN4K44
IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017492884 0001 EA 1.000
NSN/MATERIAL:5306016596412
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
SPE4A0-26-T-4051
SECTION B
PR: 7017492884 PRLI: 0001 CONT’D
TRAVIS AFB CA 94535-2918
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
TRAVIS AFB CA 94535
US
M/F: (TCN) FB442761928000
RDD: N1A
PROJ: 9GF TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017509397 0001 EA 3.000
NSN/MATERIAL:5306016596412
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A0-26-T-4051
SECTION B
PR: 7017509397 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
TRAVIS AFB CA 94535-2918
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
TRAVIS AFB CA 94535
US
M/F: (TCN) FB44276194B000
RDD: N1A
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
SPE4A0-26-T-4051 NSN/Part Number: 5306-01-659-6412 Quantity: 1 EA Purchase Request: 7017492884QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, CAThe contract is for 29 self-locking cap nuts identified by NSN 5310-01-442-7733 under solicitation SPE4A5-26-T-309E, with a response deadline of August 3, 2026, and a delivery requirement of 20 days after order placement. The item is subject to strict export controls under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled data, and approved access via the DLA questionnaire are permitted to receive it. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, with performance located in Bremerton, Washington, and primary point of contact is Patrick Oconnor, reachable via email and phone provided. The NAICS code is 332722, indicating the procurement falls under the manufacturing sector for screw, nut, bolt, and other fastener manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
O-RINGThe contract calls for a single O-ring, part number 27293 with NSN 5331-01-277-0923, supplied by DAVEY COMPRESSOR CO of Cincinnati, OH, under FSCM 16004. The item must comply with DLA Packaging Requirements for Procurement and incorporate all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The specification explicitly prohibits the use of asbestos as defined in FED-STD-313, and government identification must be removed from any non-accepted supplies. The delivery requirement is five days after award, and the purchase request number is 7017607379. The solicitation number is SPE7L1-26-T-876M, posted on July 26, 2026, with a response deadline of August 6, 2026, under NAICS code 332722 for mechanical seal manufacturing. The contracting agency is the Department of Defense, specifically the Land Supply Chain, with performance occurring at FPO, ZIP 96349. Primary point of contact is Kristina Derry, reachable via email and phone provided, and the solicitation is accessible through the DIBBS website.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract specifies the procurement of a single screw cap, socket head, identified by NSN 5305-01-560-8136 and part number MS16995-82S316, manufactured in compliance with the current revision of the applicable military or consensus industry standard, with past revisions still acceptable for previously produced items. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and take precedence over other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with all items palletized per RP001 guidelines, and labeling must follow these standards strictly. Sampling is mandated under MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned specific verification levels or AQLs. The item is not subject to shelf life restrictions and does not require Unique Item Identification. Delivery is due within five days of award, FOB origin, with inspection and acceptance occurring at the destination. Shipment must be sent via the fastest traceable method, excluding parcel post, to the specified Norfolk Naval Shipyard address in Portsmouth, Virginia. The contract is under solicitation SPE4A0-26-T-4052 with a required delivery date of July 6, 2026, and contains mandatory compliance clauses including identification of covered defense information and adherence to DoD unit of issue standards.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe item specified is a screw, cap, socket head with NSN 5305-01-661-9915, quantity of 20 units, under purchase request 7017574132, with a delivery requirement of 20 days ADO. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons, including those within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD export control training and the DLA questionnaire. The solicitation number is SPE4A6-26-T-09PN, posted on July 26, 2026, with a response deadline of August 3, 2026, and the place of performance is Groton, Connecticut, 06349-5300, under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThis contract is for the procurement of 104 self-locking hexagon nuts with NSN 5310-00-582-8201 and part number 197125 from Honeywell International Inc, designated as a critical application item. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA-specific packaging directives under RP001, and all items must be marked and labeled in accordance with physical identification standards. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is subject to strict inspection and acceptance at destination, with no quantity variance permitted. Delivery is required FOB origin within 169 days of contract award, with a need ship date of January 20, 2027 and an original required delivery date of January 20, 2028. Packaging and shipping details are to follow specified DLA procedures, with delivery directed to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is issued under contract number SPE4A6-26-T-09PB, and proprietary or insufficient technical data renders competitive procurement challenging.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332510
New
DIBBS
SPRING, HELICAL, COMPThe contract solicits a single helical compression spring identified by NSN 5360-01-128-5285 with a quantity of one unit, to be delivered within five days of award. The solicitation is issued under contract number SPE4A0-26-T-4056, with a posted date of July 26, 2026, and a response deadline of August 3, 2026. It falls under NAICS code 332510 and is managed by the Department of Defense’s Aviation Supply Chain ESOB Buys office, with performance location at Fort Campbell, Tennessee, zip code 42223-5000. The point of contact is Danita Davis, reachable via email and phone. The solicitation incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Documentation for source approval and requirements for removing government identification from rejected supplies are enforced, and bare item marking is mandated. Government identification removal is required on non-accepted supplies, and physical identification standards apply. Item Unique Identification is not required per the Service customer’s request, in alignment with DFARS 252.211-7003(c)(1)(i).
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUGThis contract solicits the procurement of 6 units of Terminal, LUG with NSN 5940-00-937-6317 from TE Connectivity Corporation, designated as a commercial item and critical application item under solicitation SPE4A0-26-T-4054. Delivery is required within five days FOB destination with zero quantity variance, and inspection and acceptance must occur at the origin. The product must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951, with packaging required to meet MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Documentation for source approval and inspection at origin is mandated, and measuring equipment must meet RT001 standards. All items must be marked per RQ017, government identification removed from non-accepted supplies per RQ011, and covered defense information protocols may apply. The shipment is designated as RDD 999/NMCS with specific transport instructions, and delivery is directed to a U.S. Navy facility in Yokosuka, Japan, with a required delivery date of July 20, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METALThe contract pertains to a single unit of a metal tube assembly, identified by NSN 4710-01-036-4847 and part number 204-89005-17, with a requirement for delivery within five days FOB origin. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including packaging governed by MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Quality assurance mandates compliance with ISO 9001:2015, and measurement equipment must meet RT001 standards. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Packaging and palletization adhere to DLA requirements, and shipment is directed to Air France Industries in Roissy CDG, France, via a freight forwarder based in Dulles, Virginia. The contract has a strict zero variance tolerance on quantity and requires acceptance at origin. The solicitation was issued under SPE4A0-26-T-4053 with a response deadline in August 2026 and an original delivery requirement of July 29, 2026, under a federal procurement framework managed by the Department of Defense’s Aviation Supply Chain ESOC.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPECThe contract specifies a single electrical cable assembly of special purpose, identified by part number 40009951-017 and NSN 6150015996318, with a quantity of one unit to be delivered within five days under FOB origin terms. Delivery is mandated to the US Army Supply Support Activity in Romania at Mihail Kogalniceanu Air Base, with strict packaging compliant with MIL-STD-2073-1E and marking requirements per MIL-STD-129, including no special marking code. All packaging and logistics follow DLA’s procurement standards, with palletization, containment, and unit packaging defined by specific codes, and transportation governed by DLA procedural notes C19 and C20. The cable assembly is subject to full compliance with technical and quality requirements listed in the DLA Master List, and quality verification employs MIL-STD-1916 or an equivalent zero-based sampling plan with zero non-conformances required unless otherwise stated, with attributes assigned strict verification levels. The contractor must also maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and adhere to requirements for physical identification and removal of government identification from non-accepted supplies. The supply is to be delivered by the original required date of July 20, 2026, under solicitation SPE4A0-26-T-4049, with no variance permitted in quantity. All performance, quality control, and compliance obligations are enforceable under DLA’s procurement authority and associated DIBBS systems.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR SUBASSEMBThis contract pertains to the procurement of an Indicator Subassembly with NSN 5895-01-398-5145 and part number 85019000-03, issued under solicitation SPE4A0-26-T-4050 by the Defense Logistics Agency for the Department of Defense. Two line items are specified: one for a single unit priced at $1.00 and another for two units priced at $2.00 each, with both items requiring delivery within five days to designated military addresses in APO AE 09321 and Muwaffaq Salti Air Base, Jordan, under FOB destination terms. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951, and mandates packaging and labeling in accordance with MIL-STD-129 and MIL-STD-2073-1E, including standardized palletization under RP001. The items must be delivered with no variance in quantity, inspected and accepted at the destination, and marked with no special coding beyond standard requirements. Cybersecurity compliance is required through a CMMC Level 2 Self-Assessment, and the contractor must adhere to all government-specific shipping, logistics, and identification protocols, including parcel post and freight instructions tied to DLAD procedural notes. The original delivery deadline is July 22, 2026, with the solicitation issued on July 26, 2026, and responses due by August 3, 2026, under NAICS code 334511 for navigation and guidance system manufacturing.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVEThe contract specifies the procurement of two BUSHING, SLEEVE units with NSN 3120-01-141-0889 and part number KR-2 from TE Connectivity Corporation, under solicitation SPE4A0-26-T-4058. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled in strict accordance with MIL-STD-129 and DLA Packaging Requirements. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with palletization following RP001 guidelines. Items are to be shipped via the fastest traceable means, explicitly excluding parcel post, to the freight shipping address at Robins AFB, Georgia. The required delivery date is July 22, 2026, and the contract includes specific government-use identifiers and contact information for Danita Davis at DLA. The item is classified under NAICS code 332991 and is part of a federal acquisition administered by the Department of Defense’s Aviation Supply Chain ESOC Buys office.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 8 commercial off-the-shelf hexagon cap screws with part number 6430443-137M1 and NSN 5305-01-579-6844, under solicitation SPE4A0-26-T-4055. The item is subject to DLA Packaging Requirements and technical quality standards referenced in the DLA Master List, with packaging mandated to comply with MIL-STD-2073-1E and marking requirements per MIL-STD-129 without special identification. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The sole supplier is CNH Industrial America LLC, and shipment must be sent via traceable freight methods, excluding parcel post, to the specified delivery address in Twinsburg, Ohio. The required delivery date is July 23, 2026, and the contract is governed by DLA procurement protocols, including unit of issue and handling specifications. All contractual data is tied to the government’s acquisition system, with the purchase request number 7017574212, unit price of $8.00 per piece, and total value of $64.00. The solicitation was posted on July 26, 2026, with responses due August 3, 2026, under NAICS code 332722 for machine shop fabrication. The contracting office is the Department of Defense’s Aviation Supply Chain ESOc Buys, with Danita Davis listed as the primary point of contact. The shipment is designated as RDD/NCMS and requires specific tracking via the provided TCN number. Government-only fields indicate the purchase is for internal use under an advanced funding and distribution code, and no set-aside status applies. The packaging, marking, and logistics procedures strictly adhere to military standards, and all documentation must align with the DLA’s eProcurement and unit of issue guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWEThe contract pertains to a single unit of a power cable assembly with part number 09-2780262-1 and NSN 6150014945182, issued under solicitation SPE4A0-26-T-4048 by the Department of Defense through DLA. Delivery is required within five days of contract award, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and unit container codes, while marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging standards, and shipment must be sent via traceable freight, excluding parcel post, to Fort Hood, Texas. The cable assembly is subject to technical and quality requirements referenced from the DLA Master List, with sampling governed by MIL-STD-1916 or equivalent zero-based plans; critical, major, and minor attributes are enforced with predefined verification levels and AQLs. Zero non-conformances are mandated in sampling unless otherwise stated, and the manufacturer may choose attribute or variable inspection methods. The contract enforces strict compliance with government identification removal, bare item marking, and other quality protocols. The required delivery date is June 9, 2026, with no quantity variance permitted, and all shipping and delivery details are directed to a specific DoD logistics point of contact.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TANK, FUEL, AIRCRAFTThe contract specifies the procurement of two aircraft fuel tanks under NSN 1560-00-730-3442 and part number S1630-62115-2, with delivery required within five days of award to Prince Hassan Air Base in Safawi, Jordan, for the Royal Jordanian Air Force. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to DLA Directive RP001 and MIL-STD-129, with hazardous material packaged according to FED-STD-313 and IP025, and non-hazardous material commercially packaged per ASTM D3951 unless superseded by DLA requirements. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03, though Item Unique Identification is not required per the Service customer’s request. Sampling for quality assurance follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. The certificate of conformance procedure under FAR 52.246-15 is authorized unless overridden by a quality assurance letter of instruction. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and palletization must conform to DLA packaging standards. Transportation and shipping instructions follow DLAD Procurement Notes C19 and C20, with the shipment designated as RDD 999/NMCS and the freight shipping and marking address specified accordingly. The contract number is SPE4A0-26-T-4057, with a required delivery date of July 20, 2026, and NAICS code 336413 for aircraft parts manufacturing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to the procurement of a single cable assembly identified by NSN 6150-01-651-1941 under solicitation SPE4A0-26-T-3918, issued by the Defense Logistics Agency’s Aviation Supply Chain ESOC Buys office. Delivery is required within five days after award to the designated destination at Stork Barracks, Building 6503, Illesheim, Germany, with the item classified as a non-commercial fixed-price supply acquisition. The contract incorporates extensive regulatory and technical requirements including adherence to MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and barcoding using Code 128 and Data Matrix, and compliance with DLA packaging requirements. The item is subject to export control under ITAR or EAR, mandating prior authorization for any disclosure to foreign persons or entities, and access to technical data is restricted to contractors with approved U.S./Canada Joint Certification Program status, completed DLA training, and explicit authorization. Cybersecurity requirements demand compliance with NIST SP 800-171 and CMMC Level 2, enforced through the DFARS clause 252.240-7997 and safeguarding of covered defense information under 252.204-7008. All invoicing must be conducted electronically through Wide Area WorkFlow, and the government retains inspection and acceptance authority at the delivery point using defined AQL levels per MIL-STD-1916 or MIL-STD-105, requiring zero non-conformances for critical and major attributes. Offerors must submit representations regarding small business status, unique entity identifiers, CAGE codes, and compliance with anti-trafficking, employment eligibility, sustainable products, and hazardous materials prohibitions including the ban on hexavalent chromium. The contract includes clauses addressing subcontracting, payment acceleration for small businesses, unauthorized obligations, contract changes, and electronic submission of payment documents, with all provisions governed by a deviation 2026-00038 that updates multiple FAR and DFARS clauses to standardize compliance. Technical data referenced in the solicitation must be accessed only through the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date governs compliance. No evaluation factors are disclosed in the available documentation, and contract pricing details are not populated in the CLIN schedule,
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to Camp PendletonThe contract involves the domestic freight shipping and final delivery of packaged washers from the manufacturer’s location to Camp Pendleton, California, under FOB Origin terms, meaning the buyer assumes all transportation costs and risks once the goods leave the supplier’s premises. The work is classified under NAICS code 484220, indicating it relates to truck transportation of freight, and is structured as a subcontract under the Department of Defense, specifically managed by the Aviation Supply Chain ESOC Buys division. The opportunity was posted on July 23, 2026, with a response deadline of July 31, 2026, and the place of performance is clearly identified as Camp Pendleton with the zip code 92055-5514. All logistics must comply with military delivery requirements and timelines, though specific packaging, labeling, or staging instructions are not detailed in the provided data.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 4 days
View Details