Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-07BKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 12 shear bolts identified by NSN 5306-01-147-1208 and part number ST3M571-12H33, classified as a commercial item and subject to source control. The item must be manufactured and tested using limited rights data accessible only to approved vendors, and any new supplier must submit a Source Approval Request. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override all other standards, and requires packaging per ASTM D3951 and labeling per MIL-STD-129, in compliance with DLA packaging guidelines. Inspection and acceptance occur at origin, with zero non-conformances required under sampling plans such as MIL-STD-1916 or ASQ H1331, unless otherwise specified. Physical identification of the bare item is required, but Item Unique Identification is not mandated. Only approved manufacturers listed in the contract, including Boeing, SPS Technologies, Hi-Shear, and others, may supply the part, and traceability to these sources is mandatory. The delivery deadline is 203 days from contract award, FOB origin, with no variance allowed in quantity, and the delivery address is Robins Air Force Base, Georgia. The contract’s technical and quality provisions are governed by the DLA Master List revision effective on the solicitation issue date, and all documentation must align with DFARS and DoD unit of issue standards.

General Info

Procure 12 shear bolts per DLA specs, approved manufacturers only, FOB Robins AFB, 203-day delivery, zero defects required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07BK for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Sommer Yates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT, SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE MANUFACTURED AND TESTED IN ACCORDANCE WITH THE CITED LIMITED RIGHTS DATA. THE GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACEABILITY TO THE APPROVED SOURCES SHOULD QUOTE. SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS CONSIDERING SOURCE APPROVAL.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A6-26-T-07BK
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 76301 P/N ST3M571-12H33
VALLEY-TODECO, INC. 06710 P/N VAL23033-12H33
SPS TECHNOLOGIES LLC 27624 P/N PBF23T-12PH33
SPS TECHNOLOGIES LLC 27624 P/N ST3M571-12H33
SONIC INDUSTRIES, INC. 57928 P/N S11-1059-12H33
B & B SPECIALTIES INC 1EM77 P/N GS1030-12H33
SPS TECHNOLOGIES, LLC 56878 P/N ST3M571-12H33
HI-SHEAR CORPORATION 73197 P/N MB84-12H33
HOWMET GLOBAL FASTENING SYSTEMS INC 92215 P/N ST3M571-12H33
TDP Rev A Gen 1 IAW BASIC DRAWING NR 76301 ST3M571 REVISION NR AB DTD 02/16/2020 PART PIECE NUMBER: ST3M571-12H33
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529567 0001 EA 12.000
NSN/MATERIAL:5306011471208
DELIVERY (IN DAYS):0203
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
SPE4A6-26-T-07BK
SECTION B
PR: 7017529567 PRLI: 0001 CONT’D
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:02/13/2027 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-07BK NSN/Part Number: 5306-01-147-1208 Quantity: 12 EA Purchase Request: 7017529567QTY: 12 Delivery: 203 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in about 3 hours

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
NUT, CLIP-ONThe contract involves the procurement of 258 clip-on nuts with NSN 5310-01-689-6216 under solicitation SPE4A6-26-T-07KU, issued by the Department of Defense’s ASC Commodities Division. The items must be delivered FOB origin within 71 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization following DLA guidelines. The deliverable is routed to the DLA Distribution facility at New Cumberland, PA, with a required ship date of October 4, 2026, and original delivery deadline of December 6, 2026. Technical and quality requirements referenced by R-numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The item is classified as critical application, and manufacturers including Monarch, Acuna Dionisio Able, Northrop Grumman, and SPS Technologies are authorized suppliers with specific part numbers. Unit of issue is each (EA), and DFARS 252.211-7003 applies since Item Unique Identification is not required. Measuring and test equipment and physical identification of bare parts are mandated, and government identification must be removed from non-accepted supplies. All documentation must adhere to source approval and covered defense information protocols.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract is for 145 units of a screw, cap, socket head, identified by NSN 5305-01-611-5489 and part number 97654A173, supplied by CAGE-coded vendors McMaster-Carr Supply Co and Dillon Aero, Inc. The requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and mandate compliance with MIL-STD-129 for labeling and packaging, ASTM D3951 for general packaging, and RP001 for DLA-specific packaging procedures. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise defined, and all attributes not otherwise classified are considered major with verification levels or AQLs as specified. The unit of issue is each (EA), and the quantity variance is strictly zero percent, meaning exact delivery is required. Delivery is FOB origin with inspection and acceptance occurring at destination, and delivery must be completed within 230 days from the contract date, with the original required delivery date set for October 14, 2026, and a needed ship date of March 12, 2027. Packaging must be palletized per RP001 and clearly marked with government identification removed from non-accepted items as per RQ011, with bare item marking per RQ017. Transportation and freight shipping are directed to the DLA Distribution facility at New Cumberland, Pennsylvania, with reference to DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-07EB and governed by DoD procurement rules, with key contact information and procurement details provided for administrative oversight.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of 2,250 machine screws with NSN 5305-01-303-4320 under solicitation SPE4A6-26-T-04XV, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 77 days of award, and the item is classified under NAICS code 332722. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging must comply with DLA packaging standards, and government identification must be removed from non-accepted supplies. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sample lots unless otherwise stipulated. Inspection and acceptance must occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and restricting use to contractors with approved U.S./Canada Joint Certification Program status, valid completion of DOD export control training, and authorization from the DLA controlling authority. DFARS 252.225-7048 governs the handling of such data, and covered defense information is restricted under RD002. The contract places the place of performance in New Cumberland, Pennsylvania, with Ashley Jones-Turner as the primary point of contact. The solicitation was posted on July 16, 2026, with responses due by July 21, 2026, and is open to federal contractors under no set-aside classification.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THRThe contract pertains to the procurement of five units of a STUD, CONTINUOUS THR, identified by NSN 5307-12-382-7354 and part number 0019-6324-400 from GEA WESTFALIA SEPARATOR GROUP GMBH. Delivery is required within 221 days to the specified receipt warehouse in Tracy, California, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and all packaging must comply with MIL-STD-2073-1E, including the specified packaging method, materials, and unit container types. Marking must adhere to MIL-STD-129 with no special markings required, and palletization must follow DLA’s packaging requirements. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances accepted unless otherwise stated, and attribute levels are assigned per defined standards. Technical and quality requirements referenced in the contract are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Transportation guidelines are outlined in DLAD procedural notes C19 and C20, and the unit of issue is aligned with ANSI X12 standards. The contract was issued under solicitation SPE4A6-26-T-07GN, with a response deadline of July 24, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Latoya Anderson as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details