Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHEAR

Active
SPE4A6-26-T-05NZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 23 shear bolts, identified by NSN 5306-01-014-2213 and part number NAS1305-25H, manufactured in accordance with the current revision of the non-government standard NAS1303 through NAS1320 Revision 13 dated January 31, 2001, and referenced technical data packages including QAP 13873 and drawing number 13873 EI-010142213. All items are classified as critical application hardware and must conform to stringent quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with mandatory compliance to MIL-STD-1916 or ASQ H1331 for sampling, zero non-conformances for acceptance unless otherwise stated, and full gaging of all Class 3A and 3B threads per SAE AS8879 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Each shipment requires a Certificate of Quality Compliance, including mill-material certification, delivered with every unit and forwarded to the DLA Troop Support Contracting Officer, while identification markings must follow MIL-STD-130N in addition to manufacturer-specific labeling. Packaging must align with ASTM D3951 and MIL-STD-129, adhering to DLA packaging rules and palletization standards, with no variance allowed in quantity. Delivery is FOB origin within 172 days from the contract’s original required delivery date of January 5, 2027, with inspection and acceptance also occurring at origin, and the item is designated as a commercial item under federal procurement rules.

General Info

23 shear bolts, NSN 5306-01-014-2213, NAS1305-25H, critical hardware, MIL-STD-1916, zero non-conformances, FOB origin, 172-day delivery.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05NZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Sommer Yates
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT, SHEAR
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALL CLASS 3A AND 3B THREADS SHALL BE GAGED
I/A/W CATEGORY 1 PER SAE AS8879 OR "SAFETY
CRITICAL THREADS" PER MIL-S-7742 UNLESS
OTHERWISE SPECIFIED. THE ABOVE EXCLUDES
SELF-LOCKING NUTS AND INTERNAL THREADS SMALLER
THAN .190 DIA. AND EXTERNAL THREADS SMALLER
THAN .138 DIA.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Unless otherwise stated, identification marking shall be in accordance with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
SPE4A6-26-T-05NZ
SECTION B
OF A TYPE')
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
TDP Rev C Gen 4 IAW BASIC NON GOVT STD NAS6603 THRU NAS6620 REVISION NR 11 DTD 12/31/2025 PART PIECE NUMBER: NAS1305-25H
TDP Rev C Gen 4 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev C Gen 4 IAW REFERENCE DRAWING NR 13873 EI-010142213 REVISION NR DTD 06/30/2026 PART PIECE NUMBER:
TDP Rev C Gen 4 IAW REFERENCE NON GOVT STD NAS1303 THRU 1320 REVISION NR 13 DTD 01/31/2001 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016473389 0001 EA 23.000
NSN/MATERIAL:5306010142213
SPE4A6-26-T-05NZ
SECTION B
PR: 7016473389 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0172
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
Need Ship Date:07/20/2026 Original Required Delivery Date:01/05/2027
SPE4A6-26-T-05NZ NSN/Part Number: 5306-01-014-2213 Quantity: 23 EA Purchase Request: 7016473389QTY: 23 Delivery: 172 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, SELF-DRILLINGThe contract pertains to the procurement of 14 packages of self-drilling screws, identified by NSN 5305-01-572-0554 and McMaster-Carr part number 91632A194, under solicitation SPE4A6-26-T-05NV. Delivery is required within 103 days to the destination in Tracy, California, with FOB origin terms and zero tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, and marking per MIL-STD-129 with no special marking required. Packaging and preservation must be free of mercury or mercury compounds, consistent with the prohibition in IP056, and palletization must conform to DLA packaging requirements. The screws must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and sampling for inspection must follow MIL-STD-1916 or an equivalent zero-based plan, with zero non-conformances required unless otherwise stated. The contract stipulates that no mercury or mercury-containing substances may be intentionally introduced into the product or its packaging, with limited exceptions for specific functional uses such as batteries or sensors, all of which must adhere to NAVSEA 5100-003D containment guidelines. The contract further requires compliance with documentation protocols for source approval, and all materials must be free of government identification if rejected. Inspection and acceptance occur at the delivery destination, with the supplier responsible for meeting all packaging, labeling, and transportation directives as outlined in DLA procedural notes C19 and C20. The unit of issue is packaged (PG), and pricing is fixed at $14.00 per package for a total contract value tied to the 14-package quantity. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and the item falls under NAICS code 332722 for screw manufacturing. The point of contact for the procurement is Michael Blain of the ASC Commodities Division, Department of Defense, and all items must be delivered to the specified warehouse address in Tracy, California. The contract enforces strict adherence to quality, packaging, and environmental requirements, with no allowance for unauthorized deviations or substances.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PLUNGER, DETENTThe contract is for a single plunger, detent part identified by NSN 5340015960956 and vendor part number H00960RB, with a required delivery of one unit within 20 days of contract award. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly permitted by the specification. Packaging must adhere to DLA standards, including MIL-STD-129 labeling, ASTM D3951 for non-hazardous materials, or TQ requirement IP025 if classified as hazardous under FED-STD-313, with palletization following RP001. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur at the delivery point. The item must be shipped via the fastest traceable method using RDD 777 and cannot be sent via parcel post; the destination is USS MARINETTE (LCS 25) at FPO AA 34088. The original required delivery date is June 30, 2026, and the solicitation was issued under contract number SPE7L3-26-T-116J with a response deadline of July 24, 2026. All shipments must reference the provided TCN and project codes, and government use identifiers must be applied as specified.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
SETSCREWMercury and mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with any hardware or supplies supplied under this contract, except for functional mercury used in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents specifically authorized by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and feature a secondary containment boundary to prevent mercury exposure, in compliance with NAVSEA 5100-003D. Quality conformance is governed by the Certificate of Quality Compliance and related CDRLs, with required documentation available through the DLA Technical Data Management Transformation system or the DLA Master List of Technical and Quality Requirements. Inspection and acceptance occur at the origin, and the contract incorporates multiple technical and quality requirements identified by R and I codes from the DLA Master List, with applicable revisions determined by the solicitation or award date. Packaging must meet DLA standards, and the supplies are subject to export control under ITAR or EAR, requiring prior authorization for any foreign disclosure or transfer, including to foreign nationals within the United States. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD training, and DLA authorization. The item is a setscrew with NSN 5305-01-699-7232, quantity of 104 units, with delivery due in 151 days after award, and all data is governed under solicitation SPE4A6-26-T-05PX.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining and Metal FabricationThe contract involves the supply of precision-machined metal components essential for antenna assembly, specifically waveguides, brackets, and RF cavities, all requiring stringent dimensional tolerances and military-grade surface finishes to ensure optimal performance in demanding operational environments. These components are critical to the functionality and reliability of defense-related communication systems, necessitating advanced manufacturing techniques and rigorous quality control protocols to meet exacting technical standards. The contract is classified as a subcontract under the North American Industry Classification System code 332722, indicating it falls within the category of machine shop services, and is associated with the Defense Logistics Agency under the Department of Defense. It was posted on July 13, 2026, and the place of performance and specific office details are not provided, though the contractual obligations are tied to fulfilling military specifications. The work is managed through the DIBBS system under contract number SPE7M526P0485, and the recipient is expected to deliver components that adhere to defense-grade requirements without deviation.
Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CASTELLATThe contract involves the procurement of 39 castellated hexagon nuts with the NSN 5310-00-167-1279 under solicitation SPE4A6-26-T-05NY, issued by the ASC Commodities Division of the Department of Defense. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging, identification, and marking of the nuts are governed by specific DLA requirements including RP001, RQ011, and RQ017, ensuring proper handling and traceability. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, weapons systems, or specified reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The delivery schedule requires fulfillment within 59 days after contract award, with performance taking place in Tracy, California. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and is procured as fully competitive under a federal specification. Primary point of contact is Ashley Sacolick via email at ashley.sacolick@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details