Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOLT, SHEAR

Active
SPE4A7-26-T-623KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 19 shear bolts identified by NSN 5306-01-168-1740 and part number NAS6216-24D, manufactured to the current revision of the non-government standard NAS6203 through NAS6220 Revision 13 dated 12/31/2024. All items must conform to stringent quality and inspection requirements, including dimensional conformance for Class 3A and 3B threads per SYSTEM 22 of FED-STD-H28/20, excluding threads below specified diameters. Sampling procedures follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise stated, and critical attributes are subject to the strictest verification levels. Items must be marked in accordance with MIL-STD-130N paragraph 4.1.b(2), in addition to manufacturer logos and material identifiers, and packaged per MIL-STD-2073-1E and DLA packaging standards with labeling compliant with MIL-STD-129 and no special marking codes. The item is classified as a critical application and subject to inspection and acceptance at origin, with a delivery timeline of 117 days from the contract award date and a required delivery date of February 8, 2027. No quantity variance is permitted, and the delivery point is FOB origin to the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract incorporates technical and quality requirements referenced from the DLA Master List and adheres to DoD-unit-of-issue standards, with all hardware manufactured after the solicitation date required to comply with the most current version of the governing standard.

General Info

Procure 19 NAS6216-24D shear bolts, zero-defect, MIL-STD compliant, deliver to Tinker AFB by Feb 8, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-623K.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Naron Sanderlin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHEAR
BOLT,SHEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
GAUGING REQUIREMENTS AS FOLLOWS
ALL CLASS 3A AND 3B THREADS WILL BE INSPECTED
FOR DIMENSIONAL CONFORMANCE IN ACCORDANCE WITH
SYSTEM 22 OF FED-STD-H28/20. THIS EXCLUDES
SELF-LOCKING NUTS, INTERNAL THREADS SMALLER
THAN .190 INCH DIA AND EXTERNAL THREADS SMALLER
THAN .138 INCH DIA.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
Unless otherwise stated, identification marking shall be in accordance
SPE4A7-26-T-623K
SECTION B
with paragraph 4.1.b(2) of MIL-STD-130N. This is in addition to any required manufacturer's logo, lot number, and material identification markings.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CRITICAL APPLICATION ITEM
TDP Rev D Gen 5 IAW BASIC NON GOVT STD NAS6203 THRU NAS6220 REVISION NR 13 DTD 12/31/2024 PART PIECE NUMBER: NAS6216-24D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017147780 0001 EA 19.000
NSN/MATERIAL:5306011681740
DELIVERY (IN DAYS):0117
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE4A7-26-T-623K
SECTION B
PR: 7017147780 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:12/09/2026 Original Required Delivery Date:02/08/2027
SPE4A7-26-T-623K NSN/Part Number: 5306-01-168-1740 Quantity: 19 EA Purchase Request: 7017147780QTY: 19 Delivery: 117 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Metal Fabrication of Mounting PlatesThe contract calls for the manufacture and delivery of ten precision mounting plates specified under NSN 5340-01-590-0080, with strict adherence to military specifications governing design, material composition, and dimensional tolerances. Full material traceability is required throughout the production process, ensuring every batch of raw material can be linked to its origin and certification, and facility change controls must be implemented to document and approve any alterations to manufacturing methods, equipment, or locations to maintain consistency and quality. Performance is designated for New Cumberland, Pennsylvania, with the work falling under NAICS code 332722 for other metal forging and stamping operations. This is a subcontract opportunity issued by the Department of Defense through the Land Supply Chain, with a response deadline of August 19, 2026, and the solicitation posted on August 5, 2026. The effort requires compliance with defense production standards, emphasizing quality assurance, documentation integrity, and operational control to support military equipment systems. All production activities must be executed under conditions that ensure repeatable precision and regulatory alignment, with no deviations permitted without formal approval and recordkeeping.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Manufacturing of Mounting Bracket (NSN: 5340015718473)Six precision-manufactured mounting brackets, identified by NSN 5340015718473, are to be produced in full compliance with military specifications, including adherence to DLA technical requirements, MIL-STD-129 for labeling, and ASTM D3951 for packaging to ensure uniformity and readiness for military logistics. The work must be executed to exacting standards to support defense operations, with all units slated for delivery to the designated place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. This subcontract, posted by the Electrical Devices Division under the Department of Defense, is classified under NAICS code 332722 and requires proposals to be submitted by the deadline of August 17, 2026, with no set-aside provisions applied. The solicitation is accessible via the DIBBS platform, and the vendor must ensure all documentation, labeling, and packaging strictly follow federal military standards to meet contractual obligations.
ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Supply of Plain, Extended Nuts (NSN: 5310016536069)The contract seeks the manufacture and supply of exactly 100 precision-machined plain extended nuts identified by part number 4195851 and national stock number 5310016536069, intended to comply with defense logistics standards for military applications. The work must be completed and delivered within a strict 111-day timeframe from contract award, emphasizing the urgency and critical nature of the component in supporting defense operations. The specification requires exacting tolerances and quality controls consistent with military-grade hardware, demanding suppliers to have proven experience in defense contracting and machining capabilities. The solicitation is classified as a subcontract under NAICS code 332722, which pertains to screw, nut, and bolt manufacturing, and is managed by the Land Supplier Operations Engines division of the Department of Defense. Performance is required at the location in Albany, Georgia, with the zip code 31704-1128 designated as the official place of delivery. The response deadline for submissions is August 17, 2026, and the solicitation was posted on August 5, 2026, giving potential vendors approximately twelve days to prepare and submit proposals. All participants must ensure compliance with applicable defense regulations and deliverables, with the contract likely serving as a direct supply link for critical assembly components in military equipment systems.
LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Precision Lock Washer Manufacturing and SupplyThe contract pertains to the manufacture and supply of a precision lock washer identified by NSN 5310015928026, requiring full compliance with military specifications governing material composition, dimensional tolerances, and performance criteria. The item must meet rigorous defense standards to ensure reliability and functionality in operational environments, with production and delivery aligned to the technical and quality assurance protocols dictated by military requirements. The work is designated as a subcontract under NAICS code 332722, indicating classification within the forging and stamping industry segment. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the place of performance is specified as Chambersburg, Pennsylvania, with a zip code of 17201-4150. The contracting activity is administered by the ASC Commodities Division under the Department of Defense, indicating the procurement supports defense logistics and supply chain needs. There is no set-aside designation provided, meaning the contract is open to all eligible subcontractors without preference for small, veteran-owned, or other categories. The official solicitation can be accessed through the DIBBS portal using the provided link.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Corrosion Preventive Anodes (Sacrificial Anodes) SupplyA subcontract has been issued for the supply of 22 units of sacrificial anodes designed for corrosion prevention in critical defense applications, meeting rigorous military specifications to ensure reliability in harsh operational environments. These anodes are intended for integration into cathodic protection systems on military equipment and infrastructure, where long-term durability and performance under extreme conditions are essential. The contract was posted on August 5, 2026, with a response deadline of August 13, 2026, and falls under NAICS code 332722 for metal forging and stamping. Performance is required at Portsmouth, with the overseeing agency being the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, indicating the procurement supports defense maintenance and readiness efforts.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing for Defense ApplicationsThe contract requires the manufacture and supply of 374 close tolerance bolts with NSN 5306011407990, classified as Critical Application Items for defense use, necessitating strict adherence to military specifications and full traceability throughout production and delivery. These components are essential for high-reliability systems and must meet exacting quality, material, and performance standards to ensure operational safety in critical defense platforms. The work is to be performed in Jacksonville, Florida, with a firm deadline for proposals on August 13, 2026, and was posted on August 5, 2026, under a subcontract solicitation designated as a HUBZone Set-Aside, targeting small businesses located in historically underutilized business zones. The North American Industry Classification System code 332722 confirms the focus on screw, bolt, and nut manufacturing, and the awarding activity is the ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturing of Close Tolerance Bolts
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Self-Locking Wing Nuts (NSN: 5310005967155)The contract calls for the supply of four self-locking wing nuts identified by NSN 5310005967155, a commercial off-the-shelf fastener designed for high-vibration environments in defense and industrial systems. These components are critical for securing assemblies where reliability and resistance to loosening under dynamic loads are essential. The requirement is posted under the NAICS code 332722, indicating it falls within the manufacturing sector for screw, nut, and bolt manufacturing, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, providing a window of eight days for potential vendors to submit proposals. Performance of the contract is specified to occur at Fort Irwin, California, with a ZIP code of 92310-9986, indicating the delivery point aligns with a major military training and logistics hub. The contracting organization is the ASC Commodities Division under the Department of Defense, and the procurement is accessible through the DIBBS system via the provided link, ensuring transparency and standardization in the bid process.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Bumper Supply with Export-Controlled Technical Data ComplianceThe contract calls for the supply of 213 units of a bumper identified by NSN 5340015779616, with strict adherence to U.S. export control regulations including ITAR and EAR, requiring proper handling, storage, and dissemination of controlled technical data throughout the supply chain. All parties involved must implement compliant procedures for technical data management and ensure that any hazardous materials associated with the bumper are properly labeled and documented in accordance with applicable federal standards. The action is structured as a subcontract under NAICS code 332722 and is managed by the Department of Defense through the LAND SUPPLY CHAIN office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Bidders must submit responses by August 17, 2026, and must be prepared to demonstrate full regulatory compliance and capability to handle sensitive defense-related components under stringent security protocols.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-13LX
The contract specifies the procurement of 1,616 units of BOLT, SHEAR with NSN 5306-01-395-1986 under solicitation SPE4A6-26-T-13LX, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 234 days from award, with performance occurring at Hill AFB, Utah, 84056-5734. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must adhere to specified quality protocols, including the removal of government identification from non-accepted items. Each delivered lot must be accompanied by a Certificate of Quality Compliance (COQC) prepared in accordance with the Supplemental Quality Assurance Provision, with one certificate per manufacturing lot identified by part number, specification, or drawing. For government-inspected contracts, the COQC must be available for review at the time of acceptance and uploaded as an attachment to the Production CLIN in iRAPT. The supplier is required to electronically submit each COQC to the iRAPT system for government record retention, and the associated data costs are included in the item price. Primary point of contact is Jeremy Stokes, with response deadline set for August 13, 2026, and solicitation posted on August 5, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-13QE
The item is a plain hexagonal nut with NSN 5310-01-387-3075, quantity of 18 units, under purchase request 7017408996, with delivery required within 142 days after order award. The solicitation is issued under contract number SPE4A6-26-T-13QE, posted on August 5, 2026, with responses due by August 13, 2026, managed by the ASC Commodities Division of the Department of Defense. The North American Industry Classification System code is 332722, and the place of performance is New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Tyrone Gatewood, reachable via email and phone provided. The technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance requires contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export-controlled data training and the DLA questionnaire, and receive explicit approval from DLA to access controlled data. DFARS 252.225-7048 governs handling of this technical information, and distribution is limited to authorized DLA contractors meeting these stringent requirements. All export activities, including digital or verbal transmission to non-U.S. persons, require prior authorization from the Department of State or Department of Commerce.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-R-XB62
The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332721
New
DIBBS
Precision Machined Component Supply – Ball Screw Actuator CapThe contract calls for the supply of 15 precision-machined Ball Screw Actuator Caps identified by NSN 1620002444628, manufactured to meet military specifications and compliant with MIL-STD-129 marking standards and hazardous material labeling regulations. Each unit must be produced to exacting technical and quality benchmarks ensuring full compatibility and operational reliability in defense systems. The procurement is structured as a subcontract under NAICS code 332721 and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Proposals must be submitted by August 13, 2026, with the performance location designated as Hill Air Force Base, Utah, 84056-5734. The solicitation was posted on August 5, 2026, and bidders must adhere to all technical, logistical, and compliance requirements outlined in the defense procurement framework.
Precision Turned Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Testing Services
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Kitting Services
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326220
New
DIBBS
Seals, Gaskets, and Elastomeric Components Supply
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Precision Machining and Component Fabrication
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
Aircraft Fuel Control Pump Overhaul Parts Manufacturing
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Support)The contract seeks support for achieving Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance, focusing on the implementation of NIST SP 800-171 security controls, defining the system boundary, and developing a robust incident response plan. This effort is essential for organizations handling controlled unclassified information and requires a structured approach to assess and strengthen cybersecurity posture in alignment with federal standards. The scope involves practical execution and documentation to meet CMMC requirements, ensuring the system can demonstrate readiness for third-party evaluation. This is a subcontract under a Total Small Business Set-Aside, meaning only small business concerns can bid, as defined by the SBA. It is classified under NAICS code 541512, indicating it pertains to custom computer programming services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Bidders must respond by August 13, 2026, with the solicitation posted on August 5, 2026, and further details available through the DIBBS system.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Packaging, Marking, and Shipment to DLAThis contract requires full compliance with ASTM D3951 and MIL-STD-129 standards for the packaging, preservation, containerization, labeling, and shipment of materials to DLA New Cumberland. All operations must adhere to strict military and industry specifications to ensure product integrity during transport and storage, with particular emphasis on proper marking and documentation to support logistics and receipt verification at the designated delivery point. The packaging and labeling must be accurate, durable, and standardized to facilitate seamless processing upon arrival at the DLA facility in New Cumberland, Pennsylvania. The solicitation is structured as a small business set-aside under the SBA program, exclusively available to total small businesses as defined by FAR 19.5, and falls under NAICS code 484220 for truck transportation. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, and is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Bidders must be prepared to coordinate directly with DLA New Cumberland for timely shipment and must demonstrate capability to meet all packaging and shipment requirements without deviation.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract is for the preparation and submission of Safety Data Sheets and hazard warning labels that must fully comply with OSHA’s Hazard Communication Standard and Federal Standard No. 313, ensuring accurate and legally required hazard communication for hazardous materials. The work falls under a small business set-aside classified as a Total Small Business Set-Aside under FAR 19.5, and the North American Industry Classification System code is 541690, indicating it pertains to other scientific and technical consulting services. Performance of the contract is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 13, 2026, indicating a short turnaround window for interested vendors to submit their proposals. The contract type is a subcontract, meaning the awardee will be working under a prime contractor or as part of a larger procurement structure. The work is critical to maintaining regulatory compliance for hazardous materials handled by the Department of Defense and requires precise adherence to federal safety standards, with no margin for error in labeling or documentation. All deliverables must meet the strict technical and formatting requirements of HAZCOM to ensure safe handling, storage, and transport of hazardous substances within defense operations.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Item Unique Identification (IUID) Marking ServicesThe contract calls for permanent Item Unique Identification (IUID) marking of components in full compliance with MIL-STD-130 standards, requiring the application of data matrix barcodes that are durable, legible, and resistant to environmental degradation. The marking process must ensure material compatibility across diverse component substrates while maintaining precise dimensional accuracy and contrast for reliable machine readability throughout the item’s lifecycle. Verification protocols are mandatory to confirm that each mark meets exacting standards for scannability, permanence, and resistance to corrosion, abrasion, and chemical exposure under operational conditions. This is a small business set-aside subcontract under NAICS code 541330, managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is open for responses until August 13, 2026, and is intended to support defense logistics by ensuring full traceability of end-item components through a universally recognized, government-mandated identification system. All submitted bids must demonstrate proven capability in executing IUID marking with documented compliance, quality control, and adherence to military specification requirements.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
Manufacture of Dual Breakaway, Auxiliary Component (P/N 21901-939)The contract calls for the precision manufacturing of a dual breakaway, auxiliary mechanical component designated as P/N 21901-939, to meet rigorous military specifications governing material durability, dimensional accuracy, and functional reliability under operational stress. The component must be produced with strict adherence to performance standards ensuring seamless integration and consistent performance in demanding environments, with all manufacturing processes subject to quality control protocols aligned with defense sector requirements. The work is to be performed at a designated facility in New Cumberland, Pennsylvania, with delivery timelines tied to the solicitation’s response deadline of August 13, 2026. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 332996 identifying the industry as Other Miscellaneous Fabricated Metal Product Manufacturing. The contract is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense and was posted on August 5, 2026, inviting qualified small businesses to respond within the eight-day window. Participation is restricted to entities eligible under the Small Business Set-Aside program, and all proposals must demonstrate capability to meet the technical and logistical demands of military-grade fabrication without reliance on non-small business subcontractors.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturing of a Critical Application Spacer Plate (NSN 5365004030349)The contract requires the complete manufacturing, finishing, inspection, packaging, and delivery of 101 units of a critical application Spacer Plate identified by NSN 5365004030349, all to meet stringent military specifications. The work must adhere to exacting standards for material composition, surface plating, and quality control procedures to ensure the components are fit for high-stakes military use. All deliverables must be fully compliant with defense requirements, including rigorous documentation and traceability throughout the production lifecycle. The contract is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker AFB, Oklahoma, 73145-8000. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The North American Industry Classification System code is 332510, indicating the focus is on forging and stamping operations. The contract is not subject to a specific set-aside designation, and all work must be completed and delivered within the specified timeline to meet operational readiness demands.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details