Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOLT, SHOULDER

Active
SPE4A6-26-T-04LYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 24 units of BOLT, SHOULDER with NSN 5306-01-143-4071, issued under solicitation SPE4A6-26-T-04LY by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after contract award, and the place of performance is Robins Air Force Base with a zip code of 31098-1887. The solicitation closed on July 20, 2026, and was posted July 15, 2026. Compliance with DLA packaging and quality requirements is mandatory, referencing the DLA Master List of Technical and Quality Requirements accessible via the official DLA website. The contract authorizes Certificate of Conformance procedures under FAR 52.246-15 unless superseded by a Quality Assurance Letter of Instruction. Critical item source inspection is required, and only approved sources including McDonnell Douglas Corp, P.B. Fasteners, S.P.S. Technologies Inc, Valley Todeco Co, Sonic Industries Inc, Hi-Shear Corp, Fairchild Fasteners, Fastener Innovative Tech, and Heartland Precision Fasteners are acceptable. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance standard unless otherwise stated in the contract. Attributes are to be classified as critical, major, or minor with corresponding verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. If attributes are unspecified, they are deemed major. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance remains zero non-conformances unless contract terms override this. The NAICS code is 332722, and the acquisition is classified as a federal procurement. Primary point of contact is David Williams, reachable via email and phone for inquiries. All supplies must adhere to tailored higher-level quality requirements and removal of government identification from non-accepted items is required.

General Info

Procurement of 24 BOLT, SHOULDER items via DLA under federal contract SPE4A6-26-T-04LY, response due July 15, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-04LY.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
David Williams
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOLT,SHOULDER
BOLT, SHOULDER
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
MCDONNELL DOUGLAS CORP
ST. LOUIS, MO
ACCEPTABLE SOURCE FOR THE ABOVE P/N
P.B. FASTENERS (27624)
S.P.S. TECHNOLOGIES INC (56878)
VALLEY TODECO CO. (06710)
SONIC INDUSTRIES INC. (57928)
HI-SHEAR CORP (73197)
FAIRCHILD FASTENERS (06950)
FASTENER INNOVATIVE TECH (58998)
HEARTLAND PRECISION FASTENERS (0ZC92)
IDENTIFY TO:
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5306-01-143-4071 Quantity: 24 EA Purchase Request: 7017410263QTY: 24 Delivery: 171 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
STUD ASSEMBLY, TURNLOCK FASTENERThe contract is for the procurement of 938 units of a STUD ASSEMBLY, TURNLOCK FASTENER with NSN 5325-01-475-8645, subject to a 71-day delivery timeline from award. The solicitation is issued under number SPE4A6-26-R-XB35 with a response deadline of July 28, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, mandating performance by qualified small businesses. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA web portal, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless a subsequent amendment supersedes it. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all Government identification removed in accordance with RQ011. The contract is managed by the ASC Commodities Division of the Department of Defense, with Ashley Hardy as the primary point of contact, reachable via email and phone listed. Performance location and office address details are unspecified, but the contract is U.S.-based. All responses must be submitted through the DIBBS portal prior to the deadline.
ASC COMMODITIES DIVISION

POSTED

in about 9 hours

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDERThe contract is for 130 shoulder bolts identified by NSN 5306-01-335-9269 and part number NAS1297-3-30, manufactured to the current revision of the non-government consensus standard NAS1297 Rev 07 dated 02/28/2026. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede any conflicting standards, including packaging requirements. Quality compliance is mandated through a Certificate of Quality Compliance and adherence to CDRLs and DD Form 1423s. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are to be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Identification marking on hardware must conform to MIL-STD-130N unless altered by specific contract directives, and packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 directives. The items are classified as critical application hardware, and all manufacturing must meet the current revision of the standard as of the solicitation date. Inspection and acceptance occur at destination, with no variance allowed in quantity. Delivery is FOB origin with a required delivery date of 171 days from award, targeting January 3, 2027, and must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. Unit price is $130.00 per EA, totaling $16,900, and all documentation references the solicitation SPE4A6-26-T-03VM with primary point of contact Duane Watkins.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
PIN, QUICK RELEASE
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CAPThe contract specifies the procurement of 2,731 plain cap nuts with NSN 5310-01-350-4257 under solicitation SPE4A6-26-T-03VV, with delivery required within 64 days of award. Items must be furnished in strict compliance with DLA packaging and marking standards, including MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with no special marking required. Preservation must follow ASTM D3951, and mercury or mercury-containing compounds are strictly prohibited in materials, packaging, or processing except for specific exempted applications like batteries and sensors as defined by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include a secondary containment boundary. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based plans, with critical attributes subject to the highest verification level, and acceptance requires zero nonconformances unless otherwise stated. The material has no shelf life and does not require Item Unique Identification. Delivery is FOB origin, with inspection and acceptance occurring at origin, and quantity variance is strictly zero percent. Two delivery points are specified: Albany, GA for 16 units and Texarkana, TX for 2,715 units, with corresponding shipment dates of February 4, 2027 and September 18, 2026, respectively. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, and pricing is fixed at $16.00 per unit.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details