This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on June 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BOLT, TALON HELO LANDING GRID

Closed

70Z08026QAK043Federal

Submission Closed07/06/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QYA2S

This contract pertains to the repair of a SERVER,RACKMOUNT under solicitation N0010426QYA2S, with a response deadline of December 22, 2025. The work is subject to strict technical and quality standards, including adherence to MIL-STD-130 Rev N for marking, compliance with original manufacturer specifications for repair procedures, and mandatory Government Source Inspection. All repairs must conform to the designated CAGE code 1LTM5 and reference CMS-00741, and no substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, with specific classification codes required for any authorized modifications. The contract mandates strict mercury-free requirements—no metallic mercury or contamination is allowed, with violations leading to rejection; exceptions require detailed approval and labeling. Deliveries are FOB Origin, and the repair turnaround time is measured from physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility system, with final Government acceptance required within the stipulated timeframe. Contractors must provide a quote with unit and total price, repair turnaround time, and an informal cost breakdown if applicable, along with detailed awardee and inspection CAGE codes. The contract includes mandatory compliance with Buy American provisions, small business set-aside status, and annual representations and certifications, including those updated for 2025. All documentation references must be obtained through official DoD sources, with special handling required for NOFORN and Official Use Only materials. The awardee must be an authorized distributor of the original manufacturer, requiring proof of authorization submitted with the offer. Packaging must follow MIL-STD-2073 unless otherwise specified, and inspection records must be maintained for 365 days after final delivery. The contract is bilateral, requiring written contractor acceptance prior to execution, and performance is governed by the Navy’s Weapon Systems Support office based in Mechanicsburg, PA. The point of contact is Tyreese C. Smith, with communications directed via official Navy email and phone, and all responses must verify part number, NSN, and nomenclature before submission.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QAD29

This contract is a solicitation for the manufacture of Quick Release Pin, R, part number 7124396-001, cage 53711. The procurement is managed by the Navsup Weapon Systems Support Mech under the Department of Defense. Key requirements include a delivery period of 90 days and mandatory government source inspection per FAR 52.246-2. The contract is a total small business set-aside and requires compliance with specific military standards for marking, configuration management, and packaging, including MIL-STD-130 and MIL-STD-2073. The agreement specifies that drawings take precedence over text in the event of a conflict. It incorporates strict quality assurance protocols, requiring the contractor to maintain inspection records for 365 days following final delivery. Payment will be processed via the Wide Area Workflow (WAWF) system using combined invoice and receiving reports. The solicitation also notes that awards for items described on Source Control Drawings are limited to listed vendors unless a substitute is tested and approved by NAVICP.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QFF46

This contract pertains to the procurement of a specialized washer, designated as SPECIAL EMPHASIS material (Level I/Scope of Certification), for use in a critical shipboard system where failure could result in catastrophic loss of life, ship systems, or the vessel itself. The item must comply with Dry Deck Shelter Specification S-5343934-1 as modified by CSD673, manufactured from QQ-N-286 annealed and age-hardened material, and is subject to stringent quality control procedures. Mandatory testing includes dye penetrant inspection, ultrasonic inspection on starting material 4 inches or greater in diameter, and slow strain rate tensile testing, which must be performed exclusively by qualified laboratories listed in the contract. All material must be fully traceable from raw stock through final fabrication, with unique heat-lot or traceability markings permanently applied to each component and matching documented certification data. Electronic signatures are permitted on certification documents provided they are securely controlled, uniquely tied to authorized individuals, and prevent unauthorized alterations. The contract mandates comprehensive quality assurance through a certified ISO-9001 quality system with supplementary requirements from ISO-10012 and ISO/IEC 17025, subject to government audit at source. All certifications must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (N50286), inspected and accepted by N39040 prior to any shipment, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped without prior written acceptance. First Article Testing is required, with the FAT report due 180 days after PRLT approval and final acceptance within 60 days of receipt. A one-year warranty from delivery date applies, and the order is “DO” rated under the Defense Priorities and Allocations System. Strict controls prohibit mercury contamination, unapproved weld repairs, and improper marking. Material certification data must be complete, unsigned with absolute affirmation, and conform exactly to specification revisions referenced in ECDS with CSD673. The procurement operates under Emergency Acquisition Flexibilities, is a total small business set-aside, and requires full compliance with Buy American, Federal Trade Agreements, and National Defense Priorities. All subcontractor activities are subject to the prime contractor’s oversight, including qualification assessments, quality system flow-downs, and traceability enforcement.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QAC81

This contract pertains to the manufacture and delivery of the USB PORT LOCK, identified by part number FY06ME5413 (3CX85), under solicitation N0010426QAC81, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The requirement is set aside for small businesses and mandates strict compliance with military standards for design, marking, and configuration control, including adherence to MIL-STD-130 for mechanical parts and MIL-STD-973 for configuration management. All items must be manufactured by the sole approved vendor, THE CONNECTIVITY CENTER INC (CAGE: 38JM6), with no substitutions permitted without prior government testing and approval. The product must be marked with the manufacturer’s catalog number and the GDMS part number, with each shipping unit clearly labeled with quantity and part identifiers. Delivery is required within 90 days of award, and the contract enforces rigorous quality assurance protocols, including full contractor responsibility for inspection and recordkeeping, with all records retained for 365 days after final delivery. The Government reserves the right to conduct independent inspections, and all supplies are subject to acceptance based on compliance with specified technical and procedural requirements. Packaging must conform to MIL-STD-2073, and the contract includes provisions for cybersecurity maturity certification, national defense priority ratings, and strict controls on the handling of controlled documents marked “NOFORN” or “Official Use Only.” Payment will be processed through the Wide Area Workflow system, with inspection and acceptance occurring at the source. The point of contact for all contract-related inquiries is Amanda R. Hayward, reachable via email or telephone, and proposals must be submitted by the deadline of July 24, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M4-26-T-362M

This contract is for the procurement of 87 fluid filter elements, identified by NSN 4330-01-318-2766 and part number 481-038 from Malabar. The order is issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-362M and is designated as a total small business set-aside. Delivery is required within 97 days, with a need ship date of December 10, 2026, and a final required delivery date of December 11, 2026. The items are to be delivered FOB Origin to DLA Distribution San Diego. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE2DH-26-T-6503

This solicitation is for the procurement of five boxes of Schirmer Tear Test blue dye wicks, used to measure animal tear production. Each unit of issue consists of a box containing 50 tests. The contract is issued by the Department of Defense through the Medical Supply Chain FSH, with a delivery requirement of 84 days after the order is received. All supplies must adhere to commercial packaging standards, ensuring each unit is in a sealed container to prevent damage and shipped in suitable exterior containers for safe delivery. Marking must strictly follow Medical Marking Standard No. 1. The procurement is subject to DLA packaging requirements and covered defense information protocols, with technical and quality requirements governed by the DLA Master List.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-T-326L

This contract is for the procurement of two fluid filter elements, identified by NSN 4330012669726 and part number P611-1150 from Devlieg Bullard II Inc. The order is managed under solicitation SPE7M1-26-T-326L by the Department of Defense Maritime Supply Chain, with a required delivery date of September 1, 2026, and a delivery window of 20 days. The items are to be delivered FOB Origin to the AWCF SSA at Fort Bragg, North Carolina. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List, and the contract specifies that shipment must be made via the fastest traceable means, explicitly prohibiting the use of parcel post.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

SEXUAL ASSAULT DETERMI

Solicitation # SPE2DH-26-T-6509

This solicitation by the Department of Defense Medical Supply Chain for Ellsworth AFB seeks one package of Sexual Assault Determination Kits, specifically the 15S Fingerstick Version from Tri-Tech Forensics, part number RE-0DOD(FS). Each package contains 15 individual kits designed for room temperature storage, providing all necessary components to collect evidence from victims and suspects in sexual assault cases, including a kit box with an affixed envelope. The contract, identified by solicitation number SPE2DH-26-T-6509 and NSN 6640-01-604-3258, requires delivery within 20 days after the order is placed. Interested parties must respond by September 10, 2026, with the primary point of contact being Tina Vu at the Defense Logistics Agency.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

LEVER, ACTUATOR, HYDRAUL

Solicitation # SPE7M2-26-T-6683

This solicitation, issued by the Department of Defense Nuclear Reactor Program under solicitation number SPE7M2-26-T-6683, is for the procurement of three hydraulic actuator levers identified by NSN 1720-00-536-4816. The contract requires delivery within 112 days after receipt of order, with the place of performance located in New Cumberland. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Eligible contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires to access the necessary technical data. Additionally, all items must adhere to DLA packaging requirements for procurement.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-326S

This contract is for the procurement of 50 fluid filters, identified by NSN 4330-01-075-2013 and Maradyne Corporation part number SAF58G-20. The order is managed under purchase request 7016686962 with a delivery requirement of 49 days after the order is placed. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The shipment must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to the DLA Packaging Requirements for Procurement. All technical and quality requirements are governed by the DLA Master List, and the original required delivery date is set for August 9, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-401R

This contract is a solicitation for the procurement of eight glass test tubes with a capacity of 10 milliliters, featuring a plain rim and round bottom. The items must be Everpure P/N 244093 or an approved equal. The delivery requirement is set for 173 days after the order is placed, with the place of performance located in Tracy, California. Packaging must adhere to commercial standards, ensuring each unit is in a sealed container to prevent breakage and shipped in suitable exterior containers. All materials must be marked according to Medical Marking Standard No. 1. The procurement is managed by the Department of Defense Medical Supply Chain and falls under NAICS code 333998.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-403H

This solicitation from the Department of Defense Medical Supply Chain MD SURG FSF is for the procurement of qualitative filter paper designed for medium precipitate. The required product must have a 5.5 cm diameter, a smooth surface, and be supplied in quantities of 100 units per hundred unit of issue. The contract specifies a delivery timeline of 20 days after the order is placed and requires the bidder to provide the specific source and part number being supplied. Compliance with several technical and quality requirements is mandatory, including the removal of government identification from non-accepted supplies and adherence to DLA packaging requirements. Because this is a medical acquisition, packaging must be commercial and sealed to prevent damage, with marking that conforms to Medical Marking Standard No. 1. The procurement is managed under NAICS code 333998 and is to be performed in Sioux Falls, South Dakota.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days

AI Contract Overview

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for 400 units of a specialized bolt and locknut assembly identified by NSN 5340-01-481-3786, designated as the Talon Helicopter Landing Grid Stanchion Bolt and Locknut. The bolt must be fabricated from minimum 7/8-inch diameter round bar of ASTM A276-00 Type 316 stainless steel, measuring 5.420 inches in length, and the accompanying locknut must be a hex M14x2.0-6H with a nylon insert, also manufactured from Type 316 stainless steel. Both components must strictly adhere to Coast Guard Drawing FL-588-3, Detail 42-D, and the Statement of Work P-588-0507, with material certifications and dimensional compliance required. All items must be individually packaged in corrugated paperboard boxes with thread protection using monofilament plastic tape, labeled with the NSN, drawing number, contract identifier, and material condition “A”, and must include a bar code compliant with ELC Specification D-000-0100 Rev. G. Standard commercial packaging is unacceptable and will result in disqualification. Delivery must be F.O.B. Destination to the USCG Surface Forces Logistics Center in Baltimore, MD, and the contract will be awarded on a firm fixed price basis using simplified acquisition procedures under FAR 13.106. This is a total small business set-aside under NAICS code 333998, with award based on lowest price technically acceptable criteria. All offerors must be currently registered in the System for Award Management (SAM.gov), possess a valid Unique Entity Identifier, and provide their Tax Identification Number. Compliance with FAR 52.212-3 is mandatory, including representations regarding small business status, inverted domestic corporation status under HSAR 3009.104-70 through 3009.104-73, and adherence to Buy American Act provisions, restrictions on subcontractor sales, prohibitions on forced labor, trafficking in persons, and environmental and labor standards. The solicitation incorporates multiple FAR clauses such as 52.209-6, 52.219-6, 52.225-1, 52.225-3

General Info

400 stainless steel bolt and locknut assemblies for Talon helicopters, FOB Baltimore, strict specs, small business set-aside, quote due July 6, 2026.

Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)View Agency

Contract Value

$23,720

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

Set-Aside

SBA

Awardee

K MACHINE & TOOL INCView Profile

Award Issued Date

07/09/2026, 12:00:00 AM UTC

Documents

(4)

P-588-0507 Talon Helo Landing Grid Bolt Statement of Work Rev 2

PDF•sow

52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services (Oct 2025)

DOCX•8 pages•provision

FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services (Mar 2026)

DOCX•contract-clauses

MIL-STD-2073-1E Packaging and Marking Guide

PDF•specifications

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 25

Combined Synopsis

Response DeadlineJul 6

Deadline has passed

Submission Closed

07/06/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 1(00080)

Contacts1 person available

OfficeNORFOLK, VA, 23510, USA

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 1(00080)

View Agency Profile

Office AddressNORFOLK, VA, 23510, USA

Contacts

DONNA SCANDALIATO

contact@example.gov

+1 (555) 000-0000

Full Description

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following parts:

Item 1)
NSN: 5340-01-481-3786

BOLT, TALON HELO LANDING GRID

TALON GRID STANCHION BOLT AND LOCKNUT

**FABRICATE BOLT IAW SOW P 588-0507 & COAST GUARD DRAWING NUMBER: FL-588-3 REV -

** PIECE NO 19 STANCHION BOLT, PIECE NO 20 LOCKNUT, DETAIL 42-D.

SPECIAL FEATURES: 5.420 INS LG; MATL TO BE ASTM A276-00, TYPE 316 CONDITION S OR B.; FABRICATE FROM 7/8 IN. DIA (MIN) ROUND BAR.

**FABRICATE LOCKNUT IAW SOW P 588-0507 & COAST GUARD DRAWING NUMBER: FL-588-3 REV -

** PIECE NO 20, LOCKNUT, HEX M14X2.0-6H 316SS ASTM A 276 W/NYLON INSERT

REFERENCES:

CG DRAWING FL-588-3 TALON GRID, SUPPORTING SKIRT AND COVER FABRICATION AND INST, PIECES NO 19 AND 20, DETAIL 42-D.

STATEMENT OF WORK (SOW): STANCHION BOLT AND LOCKNUT P-588-0507

USCG TECH PUB 3368-588-A

MPC CARD A-A-330

MANUFACTURING & DESIGN TECHNOLOGY INC (M-D-T) PART NUMBER: NAD-747.

5/8"-11 X 3" SOCKET HEAD CAP SCREWS MDT INC PART NUMBER MDD-201

M12 X 1.75 PITCH 1 5/8" LONG 1 3/16" THREAD LENGTH MDT INC PART NUMBER MDD-204

MFG: UNITED STATES COAST GUARD SFLC

PN: P-588-0507

QTY: 400 EA

*****STANDARD COMMERCIAL PACKAGING IS UNACCEPTABLE, IF YOU CANNOT MEET THE COAST GUARDS PACKAGING REQUIREMENTS YOUR QUOTE WILL NOT BE ACCEPTED. *****

Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg. 88.

This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2026-01 (Mar 13, 2026) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested, and a written solicitation will not be issued. The NAICS code for this solicitation is 333998 and the business size standard is 700. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106.

The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. The award will be made based on the lowest price technically acceptable. The Coast Guard intends to award a Firm Fixed Price Contract.

All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number with their offer. The closing date and time for receipt of quote is July 2, 2026, at 10:00 AM Eastern Standard Time

OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE:

Disclosure: The offeror under this solicitation represents that [Check one]:
__ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73;
__ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or
__it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal

__HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006)

(End of provision)

The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Sep 2023); FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services (Oct 2025) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.aquisition.gov ; FAR 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services (Nov 2023); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Mar 2026).

The following clauses listed within FAR:

52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553)

52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)

The following clauses listed within 52.212-5 are applicable:

FAR 52.203-6 Restrictions on Subcontractor Sales to the Government (Jun 2020, with Alternate I (Nov 2021)

FAR 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Mar 2020)

52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (June 2020)

52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (June 2020) (31 U.S.C. 6101 note).

FAR 52.219-6, Notice of Total Small Business Set-Aside (Nov 2022)(15 U.S.C. 644).

FAR 52.219-28, Post Award Small Business Program representation (Feb 2024)(15 U.S.C. 632(a)(2)

FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755)

FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Mar 2026) (E.O. 13126)

FAR 52.222-21, Prohibition of Segregated Facilities (April 2015)

FAR 52.222-50, Combat Trafficking in Persons (Oct 2025)(22 U.S.C. chapter 78 and E.O. 13627)

FAR 52.225-1 Buy American Act-Supplies (Oct 2022)

FAR 52.225-3, Buy American Act-Free Trade Agreement (Nov 2023)(41 U.S.C. 10a-10d)

FAR 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021)

52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018)(31 U.S.C. 3332).

The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov.

CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf