Boom Lift

SUBJECT: 72FT ARTICULATING BOOM LIFT REQUIREMENTS The 72' articulating boom lift shall be a TEUPEN TL72A or equivalent which meets the following requirements: PERFORMANCE a) Platform Height, max 72 ft. b) Horizontal Outreach with 250 lbs. 39 ft4 in c) Up and Over Clearance, max 41 ft. 8 in d) Basket Capacity 551 lbs. e) Basket Rotation 180 f) Turret Rotation 450 g) Height and Width Track Adj. 7 in / 1 ft. 6 in h) Gradeability, max 16.7 / 30.0% i) Slope Angle 19 / 34.0% j) Travel Speed 2.5 mph k) Moveable Jib MEASUREMENTS a) Platform Height 3 ft. x 7 in b) Platform Length 3 ft. x 11 in c) Platform Width 2 ft. x 8in d) Overall Length 20 ft. x 12 in e) Length Without Basket 16 ft. 7 in f) Height, Travel Position 6ft 6 in g) Minimum Width 3 ft. 3 in h) Maximum Ground Clearance 1 ft. 5 in i) Track L x W 4 ft. 9 in x 8 in j) Length Outrigger Footprint, Standard 15 ft. 5 in k) Width Outrigger Footprint, Standard 15 ft. 5 in l) Length Footprint, one side narrow 20 ft. 8 in m) Width Footprint, one side narrow 12 ft. n) Width Footprint, both sides narrow 8 ft. 8 in o) Total Weight 7275 lbs. CHASSIS a) Powerful track drive with hydraulic braking system b) Hydraulically adjustable height and width track chassis c) Indoor non-marking rubber track with low profile tread depth, for smoother travel d) Sensitive electrohydraulic remote control e) 2 LED headlights on 10-30 V engine unit f) Protective cover over control box STABILIZATION a) Fully-hydraulic, automatic levelling system with outrigger setup monitoring b) Variable outrigger system with one side narrow or both sides narrow setup options c) Wear resistant, anti-friction PVC outrigger feet d) 4 outrigger footing pads e) 4 covers on piston rod (outrigger stabilization) cylinders BOOM SYSTEM a) Telescoping upper and lower booms b) All functions are available from one control panel c) Robust, lockable control panel with integrated operation and display control d) Self- levelling platform with electro-hydraulic levelling system e) Corner-mounted, 180 rotating basket f) Boom rotation via high-performance slew ring, worm gear and hydraulic motor g) Coming home function h) Electric emergency lowering POWER a) 115 V electric motor b) Kubota Z602 Diesel Engine, 14.5 hp c) 2.91 gallon fuel tank capacity d) Start/Stop switch of combustion engine in the basket SAFETY a) 115 V power outlet in the basket b) Modular basket with eyelets for safety belts and tool tray c) High-quality paint (red) d) Hydraulic emergency lowering via hand pump e) Cables and hoses are safely routed through boom structure f) Biodegradable hydraulic oil g) Lock valves - hydraulic return valves on all hydraulic cylinders h) Relief valves protecting the hydraulic system from high pressure i) Protective covers for oil-tank, emergency controls and connecting cables and hoses j) Hour meter k) Complete second control box on the chassis and error analysis with display l) Fuzzy IV control technology MISCELLANEOUS a) Standard factory paints and colors are acceptable - No special air force colors are required. COTS a) Lift must be a brand new lift commercially available off the shelf (COTS). DELIVERY a) Boom lift shall be delivered to customer 120 days after receipt of order. b) Lift shall be delivered to Bldg. 328, 37 Sweeney Blvd, Langley AFB VA, Rm 149. One week advance notice of delivery date and time is required for government to arrange for proper personnel to be at loading dock to offload the lift. c) Vender is to provide a post-delivery inspector to inspect and certify that the lift meets all requirements listed in this document as well as all manufacturer's specifications and certify that the lift is safe and ready for use. WARRANTY a) Lift shall be warranted to be free from defects in materials and workmanship for 12 months from day of government acceptance. Structural elements shall be warranted to be free from defects in material and workmanship for 5 years from day of government acceptance. Government acceptance shall be issued after lift has been received and inspected for compliance with contract requirements. Inspections shall be by both the manufacturer's representative per requirement 8c above and by government personnel.