Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BORESCOPE

Active
SPE7L7-26-T-4280Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, issued by the Defense Logistics Agency under solicitation number SPE7L7-26-T-4280, pertains to the procurement of a borescope identified by NSN 6650016414938, with a unit of issue in KT and a quantity of one. Delivery is required within 20 days from award, with FOB origin terms, and inspection and acceptance must occur at the destination. The item must be packaged in full compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA packaging requirements, and palletization must follow specified standards. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for limited functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. Supply chain traceability documentation must be retained by the contractor as mandated by DLA Directive Procurement Note C03 from August 2016. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with attributes classified to specific verification levels or AQLs per applicable drawings or quality assurance provisions. The contractor must remove government identification from non-accepted supplies and ensure traceability of all components. The item must be shipped via traceable means, excluding parcel post, to the designated delivery location at Joint Base Lewis McChord, Washington, with the contract explicitly identifying the delivery point and government use codes. The required delivery date is July 6, 2026, and the contract is governed by DLA’s Master List of Technical and Quality Requirements referenced in the document, with applicable revisions controlled by the solicitation issue date or award date as applicable.

General Info

DLA procures one borescope NSN 6650016414938, delivery by July 6, 2026, to Joint Base Lewis McChord, compliant with MIL-STD and traceability requirements.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

BLDG 9141 SANSONE, JOINT BASE LEWIS MCCH, WA, 98433-9500, US

Set-Aside

NONE

Documents

(1)

SPE7L7-26-T-4280.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
KURT BECKA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BORESCOPE
BORESCOPE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Unit of issue is KT.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
SPE7L7-26-T-4280
SECTION B
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
GRADIENT LENS CORPORATION 4X742 P/N HS17-AF-KIT
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017399356 0001 KT 1.000
NSN/MATERIAL:6650016414938
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:CA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W91M1Z
0001 SF BN CO A GSB
AWCF SSF
9141 SANSONE
FORT LEWIS WA 98433-9500
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W587PR
0001 SF BN 02 CO E
BLDG 9141 SANSONE
JOINT BASE LEWIS MCCH WA 98433-9500
US
SPE7L7-26-T-4280
SECTION B
PR: 7017399356 PRLI: 0001 CONT’D
MARKFOR
W587PR
0001 SF BN 02 CO E
BLDG 9141 SANSONE
JOINT BASE LEWIS MCCH WA 98433-9500
US
M/F: (TCN) W587PR61810002
RDD: 181
PROJ: TP 3
SUPP ADD: W91M1Z SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A3A DIST: ADV: FC: AW
Need Ship Date:00/00/0000 Original Required Delivery Date:07/06/2026
SPE7L7-26-T-4280 NSN/Part Number: 6650-01-641-4938 Quantity: 1 KT Purchase Request: 7017399356QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 333310
New
DIBBS
EYEPIECE ASSEMBLY, OThe contract pertains to the procurement of an optical eyepiece assembly identified by part number 064407 and NSN 1240-01-382-8895, with a requirement for three units to be delivered within 245 days to a designated destination in Tracy, California. All supplies must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specifications governing sampling, inspection, and verification using MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise stated. Attributes are classified with specific verification levels or AQLs, and configuration changes necessitate formal Engineering Change Proposals or variance requests. The item must adhere to the referenced technical data SPE7M1-26-T-208G, and its design, manufacture, and processing must exclude all Class I ozone-depleting substances unless explicit written approval is secured from the contracting officer. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except in limited functional applications such as batteries or instruments, and portable devices containing mercury must include shock-proof construction with secondary containment as per NAVSEA 5100-003D. The item is designated as a Critical Application Item and must meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special marking code 06 indicating delicate instrumentation and an upward arrow, while palletization follows DLA Packaging Requirements. Government Furnished Property, including non-interference rent-free tooling, may be provided and must be requested via DLA’s GFP manager. Delivery is FOB origin with no quantity variance permitted, and inspection and acceptance occur at destination. The solicitation is a total small business set-aside under NAICS 333310 and is subject to DLA’s unit of issue standards and transportation protocols as outlined in DLAD procedural notes.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
CONTROLLER, ENGAGINGThe contract is for a Controller, Engaging with NSN/Part Number 6615-01-705-4822, quantity one unit, under Purchase Request 7017199391, with a delivery requirement of 163 days ADO. The solicitation number is SPE4A5-26-T-264P, issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a response deadline of July 16, 2026. The item is subject to multiple technical and quality requirements referenced by R and I numbers from the DLA Master List, including cybersecurity compliance at CMMC Level 2, physical identification and bare item marking, handling of covered defense information, measuring and test equipment standards, and packaging requirements. Technical data associated with this item is controlled under ITAR or EAR, and its export—including disclosure to foreign nationals—is strictly prohibited without prior authorization from the Department of State or Commerce. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and prior DLA approval. The place of performance is in San Diego, California, and the primary point of contact is Hien-Van Trinh. The NAICS code is 333310, and the solicitation is classified as a federal procurement under a simplified acquisition process.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
ANTENNAThis contract, identified by solicitation number SPE7M5-26-T-325M, pertains to the procurement of an antenna item with NSN 5985-00-254-7154, requiring six units to be delivered within 164 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to stringent packaging, marking, and preservation standards per MIL-STD-2073-1E and MIL-STD-129, including individual packaging using Method 10 where the assembly is securely bolted to a minimum 1/2-inch plywood sheet, cushioned and enclosed in a weather-resistant ASTM D5118 container with appropriate blocking and bracing. All shipments must be marked with required bar codes in compliance with MIL-STD-129 and AIM BC1, excluding only exterior containers of unrelated items in consolidated multipacks. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the item, its preservation, packaging, and marking, except for specific functional uses approved by NAVSEA, and portable devices containing mercury must have shock-proof construction with a secondary containment. The use of Class I ozone-depleting substances is prohibited in manufacturing or processing without explicit written approval from the contracting officer, and this restriction overrides any conflicting technical specifications. The contract mandates compliance with CMMC Level 2 self-assessment requirements for cybersecurity and requires complete source approval packages from alternate bidders to be considered for award. Technical data referenced in the solicitation is incomplete, but the delivered item must satisfy all referenced technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must follow RP001 DLA packaging requirements and the special packaging instruction J850114933, with no intermediate containers required. The item must be furnished by approved suppliers listed in the contract, and the unit of issue is each, with a contract price of $6.00 per unit. All performance requirements remain binding regardless of specification conflicts, and the deadline for bid submission is July 24, 2026, with a required delivery date of December 18, 2026, and a need ship date of January 5, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
WAND, SPRAY GUNThe contract pertains to the procurement of one Wand, Spray Gun with NSN 4940-01-111-8154 and part number 40152, under solicitation SPE7M4-26-T-256F. The item is required in a single unit with zero variance allowed in quantity and must be delivered within 20 days to the destination specified as FOB Origin. All packaging must comply with ASTM D3951, but must also adhere to the more stringent requirements of the DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and the unit of issue is EA. The delivery must be shipped via the fastest traceable method, excluding parcel post, with a designated freight shipping address and mark-for location in Longmont, Colorado. The required delivery date is March 18, 2024, and the item is to be inspected and accepted at the destination. This procurement is governed by specific DLA directives that override any conflicting standards, and the contract includes detailed technical compliance requirements referenced by R and I numbers from the DLA Master List. The contract identifies a primary point of contact at the Fluid Handling Division of the Department of Defense and indicates that the item is being procured for a government use, with specific program and funding identifiers included. The solicitation was posted in July 2026 with a response deadline shortly thereafter, though the delivery timeline references an earlier date. All documentation and shipping must include the specified government identifiers, and any non-accepted supplies must have government identification removed prior to return. The purchase request number and other logistical codes are embedded for tracking and accountability purposes.
FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
Federal
12--EYEPIECE ASSEMBLY,OThe contract seeks the procurement of 3 Eyelet Assembly, O units under NSN 1240013828895, with delivery required to DLA Dist San Joaquin within 245 days after contract award. The only approved source for this item is 34228 064407, and all quotes must be submitted electronically through the solicitation portal; no hard copies are available and no specifications, plans, or drawings are provided. The solicitation is a total small business set-aside under FAR 19.5, with the NAICS code 333310, and is open to all responsible small business sources that submit timely electronic quotes. The solicitation number is SPE7M126T208G, posted on July 13, 2026, with responses due by July 24, 2026. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime, and all inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details