Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BOTTLE, SCREW CAP

Active
SPE2DS-26-T-309XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single unit of a 5-gallon rectangular plastic jerrican bottle with a screw cap, identified by NSN 6640-01-083-9756, under solicitation SPE2DS-26-T-309X. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA’s medical packaging standards, requiring each unit to be sealed in a protective container that prevents damage during transit, and all shipments must be placed in commercial exterior containers suitable for safe delivery via common carrier at the lowest possible rate. Marking must follow Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and documentation for this standard can be obtained from DLA Troop Support. The item is subject to Covered Defense Information regulations and requires removal of government identification from non-accepted supplies. Delivery is due within five days of award to Pascagoula, Mississippi, with the primary point of contact being Olusola Emmanuel at DLA, and the contract was posted on August 4, 2026, with responses due by August 10, 2026.

General Info

One 5-gallon plastic jerrican, NSN 6640-01-083-9756, due in five days to Pascagoula, MS, per DLA standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

423490 - Other Professional Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

PO BOX 7003, PASCAGOULA, MS, 39567, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-309X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Olusola Emmanuel
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOTTLE,SCREW CAP
BOTTLE, SCREW CAP, RECTANGULAR, 5 GALLON<(>,<)>
PLASTIC, JERRICAN
.
UNIT OF ISSUE EACH (EA)
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-083-9756 Quantity: 1 EA Purchase Request: 7017734656QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423490
New
International
City of Lethbridge - Request for Proposal - Sand Mixing 2026
Solicitation # AB-2026-05486
The City of Lethbridge is seeking proposals for the supply and mixing of sand with Liquid Magnesium Chloride for use in its winter snow and ice control programs. The sand must be treated with Liquid Magnesium Chloride to prevent freezing, ensuring consistent performance during spreading and handling under cold weather conditions. This requirement is critical to maintaining effective winter road maintenance and public safety throughout the season. All bidders must comply with the specified treatment standards and deliver the materials in accordance with the City’s operational needs. The solicitation, identified as AB-2026-05486, was posted on August 4, 2026, with a response deadline of September 1, 2026. Proposals must be submitted to the City of Lethbridge, with the place of performance located in Lethbridge, Alberta. The primary point of contact for inquiries is Nicki Van Eck, Buyer, who can be reached via email at nicki.vaneck@lethbridge.ca. This procurement is open to qualified suppliers capable of meeting the technical and logistical demands of the contract, and all submissions are expected to align with the City’s specifications for winter maintenance operations.
City of Lethbridge

POSTED

about 15 hours ago

DEADLINE

in 27 days
View Details
NAICS: 423490
New
DIBBS
Supply of Part-Numbered Commercial Items (CAGE Code-Based Procurement)The contract mandates the supply of specific commercial items identified by unique part numbers and CAGE codes, requiring full compliance with detailed technical and logistical specifications. This includes proper packaging, handling, and delivery protocols to ensure items meet all quality and readiness standards outlined in the procurement requirements. The items are intended for use under the Department of Defense through the ASC Commodities Division, with performance expected to align with defense-grade logistical workflows. Subcontractors must respond by the deadline of August 19, 2026, with bids submitted through the designated DIBBS portal. The North American Industry Classification System code 423490 indicates this involves merchant wholesalers of hardware, plumbing, and heating equipment, suggesting the items are standard commercial components utilized in military applications. There is no set-aside designation, meaning all eligible contractors may compete, and performance location details are not specified, implying flexibility in delivery logistics as long as contract terms are met.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 423490
New
SLED
Thermal Imager Cameras and accessories
Solicitation # QQ-125380
The Virginia Department of Fire Programs is soliciting bids to procure three Bullard NXT Pro Thermal Imagers and three FLIR K85 N Thermal Cameras, both certified to NFPA 1801 standards, for delivery to the Public Safety Training Center in Hanover, Virginia. These devices are intended for use in training and operational readiness, ensuring personnel have access to high-quality thermal imaging technology compliant with national safety standards. The solicitation, identified as QQ-125380, was posted on August 4, 2026, with responses due by August 7, 2026, at 4:00 PM. Vendors must ensure full compliance with all requirements outlined in the complete solicitation document, as failure to adhere to specifications could result in disqualification. All inquiries related to this procurement should be directed to the Purchasing Department at 804-249-1997 or purchasing@vdfp.virginia.gov, with Kamisha Jackson listed as the point of contact. The equipment must be delivered to the specified training center location, and vendors are expected to meet all delivery, certification, and documentation criteria without deviation. This opportunity is open to qualified suppliers under a SLED agency procurement process, with no set-aside designated, and interested parties are advised to review the full solicitation through the provided online link to understand all terms, conditions, and technical expectations.
Department of Fire Programs

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423490
New
Federal
Supply and Installation of Mettler Toledo Ultramicro Balance (XPR3)
Department Of Commerce Noaa

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423490
New
Federal
Supply of Mettler Potentiometric Titrator System (G20S Rondolino)
Department Of Commerce Noaa

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423490
New
DIBBS
Supply of Nonflexible Disk (NSN 7045015214221)The contract involves the procurement and delivery of three nonflexible disks identified by NSN 7045015214221, sourced as a commercial off-the-shelf item for installation on the USS LABOON (DDG 58). No installation, integration, or technical support services are required, and the delivery is limited to the physical supply of the specified units. The transaction falls under a subcontract classification with a NAICS code of 423490, reflecting its placement within the wholesale trade sector for electronic parts and equipment. The contracting agency is the Defense Logistics Agency under the Department of Defense, and the award is linked to the DIBBS system with the contract number SPM50004D0353 and delivery order SPE8EN26F3476. The solicitation was posted on August 3, 2026, and while no specific delivery location or point of contact is provided, the performance is expected to support the naval vessel’s operational needs directly through the receipt of the nonflexible disks.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423490
New
SLED
General Supply and Delivery of Quoted Goods
Gwinnett County Government

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 423490
New
Federal
Laboratory Equipment and Supplies ProcurementThe contract entails the procurement and delivery of laboratory equipment and supplies, with specific requirements including freight transportation, UV decontamination between uses, and a one-year extended warranty. All items must be delivered to Denver, Colorado, no later than October 20, 2026, under FOB Destination terms, meaning the seller assumes all risks and costs until the goods reach the designated location. The solicitation was posted on August 3, 2026, with a response deadline of August 12, 2026, and is classified as a subcontract under NAICS code 423490. The contracting entity is the Office of Acquisition and Grants - Denver, under the Department of the Interior, though no point of contact or detailed place of performance information is provided beyond the delivery city.
Ofc Of Acquisition Grants-Denver

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 423490
New
Federal
Electronic Component Sourcing and Obsolescence ManagementThe contract entails the procurement of electronic components critical to defense systems, with a strong emphasis on managing part obsolescence through proactive monitoring and identification of viable substitutes to ensure continuous supply chain integrity. Suppliers must implement systems to track component lifecycle status, anticipate discontinuations, and propose authorized alternatives that meet rigorous performance and quality standards without disrupting operational readiness. All substitutions require formal approval and documentation to align with defense-specific compliance protocols. The contract also mandates adherence to mandated defense reporting requirements, including the timely submission of data related to part unavailability, replacement justifications, and supply chain mitigation efforts. Performance is tied to maintaining supply continuity for mission-critical applications, with strict expectations around responsiveness, traceability, and documentation accuracy. The work is classified as a subcontract under NAICS code 423490 and is administered by the Department of Defense through the Defense Logistics Agency Aviation at Huntsville, with proposals due by October 30, 2026.
Al DLA Aviation At Huntsville

POSTED

2 days ago

DEADLINE

in 3 months
View Details
NAICS: 423490
New
Federal
Supply of Steris-Specific Replacement Parts and ConsumablesThe contract is for the supply of OEM or approved replacement parts, filters, valves, gaskets, and consumables specifically designed for Steris autoclaves, washer/disinfectors, and endoscope reprocessors, intended for use in maintenance and repair operations. The requirement is set aside exclusively for small businesses under the SBA’s Total Small Business Set Aside program, with the NAICS code 423490 indicating wholesale trade of medical and surgical equipment and supplies. All work must be performed at the designated place of performance in Shiprock, New Mexico, with the ZIP code 87420, ensuring parts and materials meet the necessary technical and compatibility standards for Steris medical devices used in healthcare settings. The contract was posted on August 3, 2026, with a response deadline of August 7, 2026, at 11:00 PM, and is structured as a subcontract under the Department of Health and Human Services, specifically administered by the Navajo Area Indian Health Service. Suppliers must be prepared to deliver qualified products that adhere to strict OEM specifications to maintain device functionality, safety, and regulatory compliance. Though no point of contact is provided, interested small businesses must submit proposals through the SAM.gov portal linked in the posting before the deadline to be considered for award.
Navajo Area Indian Health Svc

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 423490
New
Federal
OEM-Certified Leica Microscope Parts SupplyThe contract entails the supply of factory-certified Leica replacement parts, including lenses, bulbs, stages, and electronic components, specifically for forensic laboratory microscopes used in federally operated facilities. All parts must meet original equipment manufacturer standards to ensure compatibility, performance, and regulatory compliance within forensic analysis environments. The requirement is structured as a subcontract with a Small Business Set Aside designation, reserved exclusively for small businesses as defined by the SBA, and is classified under NAICS code 423490 for miscellaneous nondurable goods merchant wholesalers. Performance is expected to be centered in Washington, D.C., with a delivery address designated by the federal agency overseeing the work. The solicitation was posted on August 3, 2026, with a strict response deadline of August 6, 2026, at 3:00 PM Eastern Time, indicating a compressed timeline for proposals. The contract is managed by the ATF’s Acquisitions Management Division under the Department of Justice, emphasizing its critical role in supporting forensic operations. While no point of contact details or specific delivery schedules are provided, vendors must demonstrate proven ability to furnish authentic Leica-certified components, maintain inventory readiness, and comply with federal procurement standards for government-issued equipment. Participation requires full adherence to small business eligibility criteria and the ability to rapidly support mission-critical laboratory systems.
ATF | Acquisitions Management Division

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 423490
New
Federal
Spare Parts and Consumables Supply for LC/Q-TOF SystemThe contract involves the supply of original equipment manufacturer spare parts and consumables specifically for the Agilent LC/Q-TOF system, including critical components such as ion sources, detectors, pumps, seals, and columns, all of which must be certified to ensure compatibility and optimal performance. The requirement mandates the use of genuine OEM parts to maintain system integrity, analytical accuracy, and compliance with operational standards. The solicitation is classified as a subcontract under NAICS code 423490, and it is issued by the National Institutes of Health Olao under the Department of Health and Human Services, with a response deadline of August 18, 2026, and a posted date of August 3, 2026. No set-aside provisions or point of contact details are specified, and the place of performance remains unidentifiable in the provided data.
National Institutes Of Health Olao

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
BLADE, LARYNGOSCOPE
Solicitation # SPE2DS-26-T-307H
The contract specifies the procurement of a Miller Size 0 newborn infant laryngoscope blade, a sterile, disposable, fiberoptic device made of stainless steel and designed for use with standard fiberoptic handles. It is regulated by the FDA as a Class II medical device, requiring compliance with labeling, registration, listing, and GMP standards, though a 510(k) clearance is not mandatory. The item must be supplied by Henry Schein, Inc. under part number 8575362 or Dyna Med under part number A22195, and bidders must clearly identify the source and part number being offered. Packaging must conform to commercial standards and Medical Marking Standard No. 1, superseding MIL-STD-129, with each unit sealed in a protective container and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. The NSN is 6515-01-396-2848, with a unit of issue of each (EA), and the contract calls for delivery of one unit within 20 days FOB destination. Inspection and acceptance occur at the delivery point, with no tolerance for quantity variance. All packaging and marking must adhere to MIL-STD-2073-1E, and the solicitation is issued under SPE2DS-26-T-307H with a response deadline of August 10, 2026. The procurement is governed by DLA packaging and quality requirements, and any applicable defense information controls must be observed.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-307G
The contract specifies the procurement of 4 units of an oral airway device identified by NSN 6515-01-708-4612, described as a Guedel-style, smooth, flexible polyethylene oral airway with a reinforced bite block, designed for single-use applications. The device is color-coded for easy identification, non-sterile, and free from natural rubber latex, available in eight sizes with embossed measurements in millimeters for quick reference. All units must be individually sealed in suitable containers to prevent damage and packed in commercial shipping containers that ensure safe, cost-effective delivery to the designated point of performance in APO, 09126-3865. Marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly state the source and part number being offered. The procurement falls under the DLA Master List of Technical and Quality Requirements with specific references to RA001, RP001, and RQ011, governing technical compliance, packaging, and removal of government identification from rejected items. The solicitation issued under SPE2DS-26-T-307G has a response deadline of August 10, 2026, with delivery required within 20 days after award, and is sourced through the Department of Defense's Medical Supply Chain for surgical support.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
ELECTRODE, ELECTROCARDI
Solicitation # SPE2DS-26-T-310K
The contract specification details a disposable adult electrocardiogram electrode with a nominal diameter of 2.000 inches, designed for use with defibrillator/monitor-recorder systems identified by NSNs 6515-01-582-4060 and 6515-01-582-4072. Each electrode features a high-tack foam backing, wet gel conductive medium, and a silver/silver chloride sensor, and is radiolucent for compatibility with imaging procedures. The product is packaged in quantities of five electrodes per package, with sixty packages per case for a total of three hundred electrodes per case. The unit of issue is PG/40 each, and the NSN 6515-01-701-8690 is referenced for procurement. Strict compliance with DLA technical and quality requirements is mandated, as outlined in the DLA Master List, with applicable revisions controlled by solicitation or award date depending on acquisition scale. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. The requirement is for two packages, with delivery due within twenty days of award, under solicitation SPE2DS-26-T-310K, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance at Fort Bragg, North Carolina. Bidders must clearly indicate the source and part number being offered, and all responses are subject to the procurement’s deadlines and federal acquisition regulations.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
APPLICATOR, DISPOSABLE
Solicitation # SPE2DS-26-T-305Y
The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
FIRST AID KIT, SMALL CR
Solicitation # SPE2DS-26-T-308T
This contract is for the procurement of a single small craft naval gun response first aid kit, specified by NSN 6545-01-648-2690 and part number P/N 80-0418, manufactured by NORTH AMERICAN RESCUE, LLC. The kit consists of a lightweight, olive drab green outer bag constructed of 500D Cordura solution-dyed nylon, designed for durability and resistance to sand and water, with self-repairing zippers and silent 550 paracord pull loops. It includes two removable internal pouches secured via hook-and-loop fasteners, each equipped with antipilferage seals for security. The contents are two identical Naval Gun Response Aid Pouches (PN 80-0357), one Naval Gun Response Bag (PN 80-0417), and critical medical items including two 34 Fr and two 28 Fr nasopharyngeal airways, two surgical lubricants, two Combat Application Tourniquets, two 6-inch and two abdominal/stump emergency trauma dressings, two HyFin chest seals, two 7.25-inch trauma shears, four SAM Splint II devices, two three-inch elastic wraps, and two permanent markers. All components are required to be delivered within nine months of manufacture, and the kit is not regulated by the FDA. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere to ASTM D3951 if non-hazardous, with DLA technical requirements taking precedence. Shelf life is 60 months and non-extendable. Delivery is FOB destination within 20 days of contract award, with no variance permitted in quantity. The kit must be shipped via traceable means, not parcel post, and delivered to the specified FPO address. All packaging and labeling must conform to DLA’s packaging standards, and the vendor must specify the exact source and part number supplied.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
BANDAGE, GAUZE
Solicitation # SPE2DS-26-T-309P
The product is a proprietary non-woven cotton blend rolled wrapping gauze known as TACGAUZE, designed for superior fluid absorption and wound wrapping performance. It measures 4.5 inches in width and 120 inches in length, vacuum sealed and sterilized for single-use only. Each unit is identified by NSN 6510-01-676-3176, with a total quantity of two units required under solicitation SPE2DS-26-T-309P. The product must have a shelf life of 60 months, and no more than nine months may have passed from the date of manufacture to the date of delivery to the government. All containers must be marked with the lot number and date of manufacture prefixed by MFD. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each unit must be sealed in a protective container suitable for safe transit via common carrier to the delivery point in Raleigh, NC, with a 20-day delivery window. The supplier must specify the source and part number being offered, and all packaging and marking must meet DLA’s packaging and medical marking requirements as referenced in applicable technical and quality standards.
Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
CONTAINER, SHARPS SHUTT
Solicitation # SPE2DS-26-T-309M
The container is a sharps shuttle storage unit designed for safe handling and disposal of medical sharps such as catheters and syringes used during emergency procedures. Constructed from unbreakable polypropylene with a ribbed texture for durability and grip, it features a one-piece red molded polypropylene top that includes a permanent locking mechanism to secure contents after final closure, while a temporary closure ensures containment during active use. The design meets the MMESO standardized joint product requirement and is intended for reliable, high-performance use in clinical environments. The unit is sold individually with the NSN 6515-01-518-8551 and must be supplied with clear identification of source and part number. Compliance is required with DLA technical, quality, and packaging standards, including provisions for removal of government identification from non-accepted supplies and potential handling of covered defense information. The solicitation is issued under contract SPE2DS-26-T-309M by the Department of Defense’s Medical Supply Chain, with a response deadline of August 10, 2026, and a required delivery within 20 days of award to FPO, 96677.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
FLASHLIGHT, EYE EXAM
Solicitation # SPE2DS-26-T-306D
The contract is for the procurement of three disposable, self-contained eye examination flashlights with a blue spot beam, identified by NSN 6515-00-185-9482 and purchase request 7017744837, under solicitation SPE2DS-26-T-306D. The item is classified as a medical device regulated by the FDA, requiring verification by the contracting official through EBS referral with detailed manufacturer and bidder information. Each unit must be packaged in a sealed commercial container that protects against damage and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Exterior shipping containers must ensure safe, cost-effective delivery via common carrier to the designated destination point. The device must be sourced with a specified manufacturer part number and supplier, and bidders must clearly state their source and part number in their submission. Delivery is required within 55 days of contract award, with a firm delivery date of August 4, 2026, and delivery terms are FOB destination. The units must be marked in accordance with Medical Marking Standard No. 1, and packaging must adhere to commercial standards as specified in the procurement document, not MIL-STD-2073-1E despite earlier references. The shipment is destined for APO AP 96260-5479 for U.S. medical material center purposes, with a secondary freight address at Camp Carroll, Korea. The unit of issue is each (EA), quantity is fixed at three with zero variance allowed, and the unit price is $3.00 for a total contract value of $9.00. All technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and delivery procedures are strictly governed by DLA’s medical logistics directives.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
TESTER, LEAKAGE, COLONOF
Solicitation # SPE2DS-26-T-309A
The contract pertains to the procurement of a Tester, Leakage, ColonofiberScope, identified by NSN 6515-01-312-0897, with a unit of issue of each. The item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies. Covered defense information requirements apply, and bidders are required to specify the source and part number being offered. The solicitation is for one unit under purchase request 7017735390 with a delivery deadline of 20 days after order. The solicitation number is SPE2DS-26-T-309A, issued on August 4, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 339112, is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, and performance is designated to FPO with a ZIP code of 96616. Primary point of contact is Colin Owens, reachable via email and phone provided.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
SUPPORT, BOW
Solicitation # SPE2DS-26-T-306E
The contract specifies the procurement of two aluminum bow supports, each 12 inches nominal in size, designed for use with finger traps and identified by NSN 6515-01-490-5116. These items are intended for medical applications and must comply with all associated technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers. Packaging and marking must adhere to Medical Marking Standard No. 1, which replaces MIL-STD-129, and each unit must be sealed in a suitable container to prevent damage, with exterior shipping containers meeting commercial standards for safe and cost-effective delivery via common carrier to the designated point of performance in APO, ZIP 96260-5479. The unit of issue is each, and bidders are required to clearly indicate the source and part number being offered. All provisions are governed by the Federal Acquisition Regulation and the DLA Packaging Requirements, and the item must be delivered within 84 days of award. The solicitation, issued under SPE2DS-26-T-306E, was posted on August 4, 2026, with responses due by August 10, 2026, under NAICS code 339112 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
CABLE, INVASIVE BLOOD P
Solicitation # SPE2DS-26-T-306F
The contract is for a right-angle invasive blood pressure transducer cable with an Edwards connector, intended for use with oval transducers, and is classified under the NSN 6515-01-615-0921. The unit of issue is each, with a quantity of three units required at a unit price of $3.00, totaling $9.00. Delivery is set for 84 days after award, with delivery terms FOB destination, and no variance is permitted in quantity. Inspection and acceptance occur at the destination point. The item is regulated by the FDA, requiring referral to a product specialist in EBS with full bidder and manufacturer details including part numbers. Packaging must comply with the Medical Marking Standard No. 1, which supersedes MIL-STD-129, and each unit must be sealed in commercial-grade containment to prevent damage, with outer shipping containers ensuring safe, low-cost transport to the delivery point. The packaging and marking instructions must strictly adhere to the specified commercial standards outlined in SPE2DS-26-T-306F, and the material is subject to defense information coverage under RD003. The contract references DLA’s technical and quality requirements identified by R and I numbers and mandates that bidders explicitly state the source and part number of the supplied item. The delivery address is APO AE 09227-0000, with freight shipping directed to Kaiserslautern, Germany, and the original required delivery date is August 4, 2026.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
DOPPLER, BLOOD FLOW
Solicitation # SPE2DS-26-T-307Y
The contract pertains to the procurement of a handheld Doppler blood flow device, specifically the Summit Doppler LifeDOP 150 Series equipped with an audio recorder and an 8 MHz vascular pencil probe, designed for non-display vascular assessment and requiring three AAA batteries. The unit is sold individually and must meet stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is regulated by the FDA, necessitating a referral through EBS to a product specialist for confirmation prior to award, including details such as bidder and manufacturer information, part number, and item description. The National Stock Number is 6515-01-734-9276, with a requirement for four units to be delivered within twenty days of award to Hurlburt Field, Florida, under solicitation SPE2DS-26-T-307Y. Bidders are required to clearly specify the source and part number being supplied. The contract falls under NAICS code 339112 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 10, 2026. Covered defense information potentially applies, and all supplies must comply with DLA packaging and government identification removal requirements for non-accepted items.
Surgical and Medical Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details