Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BOX, MICROSCOPE SLIDE

Active
SPE2DH-26-T-5552Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the procurement of one each of a plastic hinged-box microscope slide, specifically Fisher Scientific P/N 03-448-5, with each box holding 100 slides measuring 25mm by 75mm. The item is not regulated by the FDA and must be packaged in accordance with DLA’s Packaging Requirements for Procurement, using commercial-grade sealed unit containers that protect against damage or breakage, and shipped in suitable exterior containers that ensure safe delivery at the lowest carrier rate to the designated military destination. All packaging and labeling must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must follow DLA’s Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951. The material is not classified as hazardous per FED-STD-313, so commercial packaging per ASTM D3951 applies unless overridden by a higher-priority DLA requirement. The shipment must be sent via traceable means and not through parcel post. Delivery is due within 20 days of contract award, with FOB destination terms, and inspection and acceptance occur upon arrival at the specified Fort Bliss, Texas delivery point. The item is identified by NSN 6640-00-408-9915, with a required delivery date of July 29, 2026, and the buyer is the 1st Armored Division Sustainment Brigade, designated under W8001Z.

General Info

Procure 100-count plastic hinged-box microscope slides, NSN 6640-00-408-9915, deliver to Fort Bliss by July 29, 2026, per DLA packaging standards.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5552.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BOX,MICROSCOPE SLIDE
BOX, MICROSCOPE SLIDE, PLASTIC, HINGED COVER,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
HOLDS 100 25MM X 75MM SLIDES
.
UNIT OF ISSUE EACH (EA)
.
BIDDER SHALL SPECIFY CO & P/N BEING SUPPLIED
.
THIS ITEM IS NOT REGULATED BY THE FDA
SPE2DH-26-T-5552
SECTION B
FISHER SCIENTIFIC COMPANY L.L.C. 22527 P/N 03-448-5
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017631809 0001 EA 1.000
NSN/MATERIAL:6640004089915
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
SPE2DH-26-T-5552
SECTION B
PR: 7017631809 PRLI: 0001 CONT’D
US
MARKFOR
W8001Z
0142 CS BN CO A COMPOSITE
1AD SUSTAINMENT BRIGADE SSA
21287 LIGHT INFANTRY AVENUE
FORT BLISS TX 79918-2527
US
M/F: (TCN) W8001Z62050041
RDD: 219
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/29/2026
SPE2DH-26-T-5552 NSN/Part Number: 6640-00-408-9915 Quantity: 1 EA Purchase Request: 7017631809QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
BOWL, SEDIMENTThe contract pertains to the procurement of four units of a Bowl, Sediment (Bowl Assy. Coalescer) with NSN/Part Number 4330-01-319-8052, under solicitation SPE7M1-26-T-235Z, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. Deliveries are required within 126 days of award, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timeline. Packaging must comply with DLA standards, and all items must be physically marked per RQ017. Government identification must be removed from non-accepted supplies. The contract is subject to Covered Defense Information protocols and requires Cybersecurity Maturity Model Certification Level 2 compliance by third-party assessors. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including those within the U.S., and mandate adherence to DFARS 252.225-7048. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training, and DLA authorization. Any configuration changes require formal engineering change proposal approval. The place of performance is Tracy, California, with Michele Davis as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
PARTS KIT, SPECIALIZEDThe contract pertains to a Parts Kit, Specialized, identified by NSN 2590-01-495-6900, with a quantity of 113 KT and a purchase request number 7017603450 for a quantity of 287 units. Delivery is scheduled for 141 days after order date. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals within the United States or overseas. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program status, verified training completion on handling controlled technical data, and formal approval from DLA authorities. The solicitation, numbered SPE7L3-26-T-136D, was posted on July 28, 2026, with responses due by August 10, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 333998. The contracting activity falls under the Department of Defense through the Land Supplier Operations Vehicle Support agency, with performance located in Jacksonville, Florida, and primary point of contact being Matthew Curry.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
FELT, MECHANICAL, PREFORThe contract pertains to the procurement of 385 units of FELT, MECHANICAL, PREFORMED with NSN 5330-00-599-8279, specified to meet precise dimensional requirements of 5.500 inches in outer diameter, 4.734 inches in inner diameter, and 0.187 inches in thickness. The item is classified as a commercial item and must be manufactured in accordance with the current revision of a recognized part standard, either military or consensus non-governmental, with prior revisions still acceptable for historical hardware. All new units produced after the solicitation date must conform to the latest standard revision. The item must comply with MIL-STD-130N for identification marking, contain no asbestos as defined by FED-STD-313, and is subject to critical item source inspection. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and unspecified attributes are treated as major with assigned verification levels or AQLs. The purchase is fully competitive under a military or federal specification. The solicitation number is SPE7L3-26-T-135S, issued on July 28, 2026, with a response deadline of August 7, 2026. Delivery is required within 48 days after award, and performance is designated for Robins AFB, GA, ZIP 31098-1887. The contracting agency is the Department of Defense under Land Supplier Opns Vehicle Spt, with Susan Diamond as the primary point of contact via email dla.flbb1prs@dla.mil and phone 6146925625. The NAICS code is 333998, and the acquisition falls under DLA packaging and technical quality requirements, incorporating standards from the DLA Master List of Technical and Quality Requirements. The procurement does not involve any set-aside designation and is subject to the DLA master list revision in effect on the solicitation issue date.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ASSEMBLY, FLUThis contract pertains to the procurement of a Filter Assembly, Fluid with NSN 2940-01-436-9579 and part number HZ8640A20KNTB3HY258, for a quantity of four units. Manufacturing must follow a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains teams. The item is designated as a restricted source requiring government engineering approval, and the specification strictly prohibits intentional use of mercury or mercury-containing compounds in the hardware, except for specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as authorized by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revision control tied to the solicitation or award date depending on acquisition size. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 06 for delicate instruments and an upward arrow, and palletization follows DLA packaging standards. Delivery is FOB origin with a required delivery window of 161 days, with inspection and acceptance occurring at the destination. The item must be delivered to DLA Distribution at the New Cumberland, PA facility by January 19, 2027, with no variance permitted in quantity. Transportation procedures align with DLAD procedural notes C19 and C20, and the unit of issue is each (EA) as per DoD standards.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333998
New
DIBBS
MOUNTING MEDIUM, MICROSThe contract specifies the procurement of a synthetic resin mounting medium for microscopy, with a refractive index of 1.52 when dry and a 60 percent solution in toluene or xylene, sold in 1-ounce bottles. Each unit must have a shelf life of 12 months, and no more than two months may have passed between the date of manufacture and delivery to the government. Packaging must comply with commercial standards, using sealed unit containers to prevent damage and exterior shipping containers suitable for safe delivery via common carriers at the lowest rate, including export packaging when required. All items must be labeled with the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number, adhering to Medical Marking Standard No. 1, which supersedes MIL-STD-129. The product is identified by NSN 6640-00-935-1485, with a unit of issue of one bottle equivalent to eight drops, and must be sourced with clear specification of the part number and manufacturer. Delivery is required within 20 days to Fort Bliss, Texas, under solicitation SPE2DH-26-T-5555, with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, and all applicable defense information safeguards in place.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TEST PAPER, CHLORINE
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
SEXUAL ASSAULT DETERMI
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
HOLDER, PAD, DETECTOR
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
DISC, CENTRIFUGAL SEThe contract is for the procurement of one centrifugal disc separator, identified by NSN 4330-01-414-0470 and part number 871683281 from Alfa Laval Inc, under solicitation SPE7M1-26-T-233X. Delivery is required within 20 days to the USS THEODORE ROOSEVELT CVN 71 at FPO AP 96632, with FOB destination terms, no variance allowed in quantity, and inspection and acceptance occurring at the delivery point. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging methods including dry preservative treatment, CA wrap material, and D3 unit containers; palletization follows DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except for approved functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Shipping must be conducted via fastest traceable means, excluding parcel post, and adheres to DLA procedures C19 and C20 for vessel shipments. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable R and I-coded specifications, with the controlling revision determined by the solicitation or award date based on acquisition size. The required delivery date is July 29, 2026, with the solicitation posted on July 27, 2026, and responses due by August 7, 2026.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIThis contract specifies the procurement of a fluid filter element under solicitation SPE7M2-26-T-5769, with a required delivery of two units within 164 days, to be shipped FOB origin. The item is identified by NSN 4330011849867 and must conform to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The filter element is classified as a critical application item and must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare item markings including the contract number, NAWC CAGE code, and part number unless superseded by associated technical drawings. The contract prohibits intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific exemptions such as functional use in batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents, and where present, portable fluorescent lamps and instruments must be shockproof with a secondary containment boundary as per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using unit container D4, intermediate container E5, and unpack code U, with no special marking required. Palletization follows DLA packaging requirements, and delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces a zero variance in quantity and establishes destination as both the inspection and acceptance point. Approved suppliers include PALL AEROPOWER CORPORATION, SEPARATION TECHNOLOGIES, and NORMAN FILTER COMPANY, L.L.C., each with designated part numbers. The procurement is managed by the Department of Defense under the Nuclear Reactor Program, with Alisha Blanton as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
MEDIA, FILTER, GRAVELThe contract pertains to the procurement of filter media gravel, identified by NSN 4330-01-623-0473 and part number 85-5006, with a quantity of 4 gallons required for delivery within 20 days FOB destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, with units packed in buckets or pails corresponding to a 3.5-gallon QUP standard. Marking adheres to MIL-STD-129 with special requirements labeled ZZ, and palletization follows DLA guidelines. Delivery is directed to USNS EARL WARREN at FPO AP 96691-2900, with shipment and transportation governed by DLAD procedural notes. Inspection and acceptance occur at destination with zero tolerance for quantity variance. The contract is issued under solicitation SPE7M1-26-T-233S, originally due for response by August 7, 2026, with a required delivery date of July 23, 2026. Government-specific identifiers and handling codes are included for internal use, and the NAICS code 333998 classifies the procurement under miscellaneous manufacturing.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUIThe contract solicitation SPE7M1-26-T-213E is a total small business set-aside for the procurement of 361 fluid filter elements with NSN 4330-12-417-6825, issued under the Department of Defense’s Maritime Supply Chain. The item must be delivered FOB origin within 148 days after award, with a need ship date of December 23, 2026, and an original required delivery date of June 8, 2027. All deliveries are to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and both inspection and acceptance occur at the destination. The contract includes strict compliance with DLA packaging and marking standards, requiring adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, including a special shelf life marking code 33, with palletization conforming to RP001 DLA Packaging Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited in any part of the item, overriding any conflicting specification, and any substitute chemicals must be pre-approved unless explicitly authorized in the technical data. All hazardous materials must be labeled in accordance with OSHA's Hazard Communication Standard and DFARS 252.223-7001, with Safety Data Sheets required prior to award, and government markings must be removed from all non-accepted supplies. The contract mandates electronic invoicing exclusively through WAWF and includes multiple DFARS clauses governing cybersecurity information handling, whistleblower rights, former DoD official compensation restrictions, control of government work product, and disclosure of sensitive information. The solicitation is subject to the DLA Master List of Technical and Quality Requirements, with compliance tied to R or I numbers referenced in the master list, and the offeror must affirm its small business status, provide UEI and CAGE codes if applicable, and submit proposals electronically via DIBBS no later than July 30, 2026. The contract type remains unspecified pending award, and pricing details indicate a unit price of $361.00 for the 361 units, with no variance permitted in quantity.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
FILE, PULP CANAL, DENThis contract specifies the procurement of 36 sets of ready-steel K-files for endodontic use, each set containing six pre-sterilized stainless steel instruments with square cross-sections, sized 45 to 80 and measuring 25 millimeters in length. The files feature non-cutting safe-ended batt tips, pre-inserted silicon stops for depth control, and color-coded ergonomic handles designed for secure grip and precise tactile feedback during root canal cleaning, unclogging, and shaping procedures. Manufactured from premium stainless steel, these instruments are engineered for durability, sharpness, and resistance to fracture, making them suitable for high-demand clinical environments. The product is classified as a TYPE I (CODE S) item with a non-extendable shelf life of 60 months, and must comply with all DLA packaging, quality, and technical requirements as defined in the DLA Master List. The item is identified by NSN 6520-01-718-2167 and is subject to covered defense information protocols. Bidders are required to clearly state the source and part number being supplied. The solicitation is issued by the Department of Defense under the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and delivery expected within five days of award to Suffolk, Virginia, 23435-5000.
Dental Equipment and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 316210
New
DIBBS
SHOES, SHOWERThe contract specifies the procurement of adult shower shoes with a cross strap for secure fit, featuring a 0.750 inch rubber synthetic sole, in black color, and designed to be non-slip. These items are packaged in units of 36 pairs per package and are identified by the NSN 6532-01-469-7522, with a single package quantity ordered under purchase request 7017637091. The solicitation, numbered SPE2DH-26-T-5566, was posted on July 28, 2026, with responses required by August 4, 2026, and delivery must be completed within 20 days after delivery order issuance. The item falls under NAICS code 316210 and is being procured by the Department of Defense through the Medical Supply Chain FSH office, with performance required at Fort Bliss, Texas, 79918-2527. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. Primary point of contact for inquiries is Tina Vu, reachable via phone or email provided.
Footwear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
LITTER, NONRIGID, POLELEThe contract specifies the procurement of three nonrigid, poleless litters designed for shoulder carry with quick-release straps, each capable of supporting a minimum weight capacity of 450 pounds. When unpacked, the litter measures 65 inches by 23 inches, and when packed, it must compress to dimensions of 10 inches by 7 inches by 1.5 inches thick, with a black finish. The item is classified under NSN 6530-01-600-7741 and is identified by manufacturer part number PHL-K-B from TACMED SOLUTIONS, LLC. It is regulated by the FDA as a Class I medical device under regulation 880.6900, requiring compliance with registration, listing, labeling, and GMP standards, even though a 510(k) premarket notification is not mandated. All units must be marked in accordance with the latest edition of the Medical Marking Standard No. 1, superseding MIL-STD-129, and packaging must meet DLA Packaging Requirements for Procurement (RP001) and MIL-STD-2073-1E standards. Each litter must be individually sealed in a commercial unit container and packed in suitable shipping containers that ensure safe, low-rate transport to the designated destination. Delivery is required within 84 days to APO AE 09227-0000, with the original delivery date set for July 28, 2026; no quantity variance is permitted. All items are subject to inspection and acceptance at the destination, and shipment must comply with DLA transport procedures including freight shipping to the specified facility in Kaiserslautern, Germany, with special attention to the medical marking standard and commercial packaging requirements for secure delivery.
Alumina Refining and Primary Aluminum Production

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER,The contract calls for the procurement of 20 disposal containers specifically designed for the safe handling and disposal of hypodermic needles and syringes. Each container must measure between 6 to 7 inches in length and 1 to 2 inches in diameter, feature a securable cap, and include a lift-off cover to ensure safe containment and prevent accidental exposure. The product is identified by NSN 6530-01-645-6923 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The contract also notes that Covered Defense Information may apply, requiring compliance with relevant data protection protocols. Delivery is required within 20 days of award, with performance location specified as Fort Bliss, Texas, 79918-2527. The solicitation, identified as SPE2DH-26-T-5564, was posted on July 28, 2026, with responses due by August 4, 2026. It falls under NAICS code 339113 for medical and surgical instrument manufacturing and is a federal procurement managed by the Department of Defense through the Medical Supply Chain FSH. Tina Vu is the primary point of contact, reachable via email and phone, with additional details available through the DIBBS portal. No set-aside classification is indicated, and the procurement is open to all qualified vendors meeting the specified technical, quality, and logistical requirements.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
PAD, SPLINE SPLINTThe contract is for the procurement of disposable PAD, SPLINE SPLINT units designed for use on the forehead restraint strap to prevent contamination from body fluids. Each package contains ten pads and is associated with the SK-300 SPLINE SPLINT II TRANSPORT SYSTEM, identified by the NSN 6530-01-265-3583, with a unit of issue of one package per ten units. The product is governed by specific technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements under identifiers R and I numbers, and must comply with DLA packaging regulations and protocols for removing government identification from non-accepted supplies. Bidders are required to clearly state the source and part number being supplied, with the specified NSN for this item being 6530-01-507-9533, and the quantity requested is one package under purchase request 7017631805. Delivery must be completed within 20 days after order, and the solicitation is issued under contract number SPE2DH-26-T-5560, with responses due by August 4, 2026. The procurement falls under NAICS code 423450, is managed by the Department of Defense through the Medical Supply Chain FSH, and the performance location is Fort Stewart, Georgia. Primary point of contact is Tina Vu, reachable via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
GEL, TRANSMISSION, ULTRAThe contract specifies the procurement of 250 mL squeeze bottles of transmission gel for ultrasound applications, packaged in cases of 12 bottles per pack for a total of two packs. The gel is an aqueous, viscous, tinted formulation designed to be non-sensitizing, bactericidal, non-irritating to skin, non-injurious to transducers, non-flammable, and non-corrosive, with a pH range of 6.50 to 6.95. It is intended exclusively for use in ultrasound procedures and must meet strict shelf-life requirements: a non-extendable shelf life of 60 months from date of manufacture, with no more than nine months allowed to elapse between manufacturing and government delivery. All items must be marked in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must provide the source and part number being offered. The NSN is 6525-00-529-3346, with a purchase request number of 7017631791 and a delivery requirement of 20 days after award. The solicitation number is SPE2DH-26-T-5553, posted on July 28, 2026, with responses due by August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance to be delivered to Fort Bliss, ZIP 79918-2527, and primary contact is Tina Vu at Tina.Vu@dla.mil or 445-737-1120.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MANIKIN, RESUSCITATIONThe contract specifies the procurement of a single set of an adult CPR training manikin designed for intermediate-level resuscitation instruction, featuring a medium skin tone and gender-neutral design to support inclusive training environments. The manikin is equipped with an integrated CPR rate monitoring system that uses LED indicators to visually guide correct compression rates between 100 and 120 per minute and emits an audible click when chest depressions reach the appropriate depth for effective compressions. It operates on two AA batteries and includes ten replacement face shield/lung bags and a durable nylon carry case for storage and transport. The unit is classified under the NSN 6910-01-708-0577 and must comply with all applicable DLA packaging and technical quality requirements as defined in the DLA Master List of Technical and Quality Requirements. Delivery is required within 20 days of award, with performance occurring at Norfolk, Virginia, under the procurement reference 7017638336 and solicitation SPE2DH-26-T-5572, which was posted on July 28, 2026, with responses due by August 4, 2026. The acquisition is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details