Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BRACE, CAST, ELBOW

Active
SPE2DS-26-T-239MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single elbow brace, cast, designed for large right arms measuring over 8 inches from wrist to elbow, with a lock-out range of motion from 0 to 120 degrees in 10-degree increments. The device must be latex-free, washable, and air-dryable, and is regulated by the FDA, requiring referral through EBS for confirmation prior to award. It must conform to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards. Packaging must comply with Medical Marking Standard No. 1 and ASTM D3951, with each unit sealed in a protective container and shipped in commercial exterior containers suitable for safe delivery via common carrier at the lowest cost. Marking and labeling must adhere strictly to the specified medical standards, not MIL-STD-129. The item is to be delivered FOB destination within 20 days, with no variance allowed in quantity. The sole delivered unit is identified by NSN 6515-01-599-3002 and must be shipped by traceable means, excluding parcel post, to the designated military facility at Fort Bliss, Texas. The supplier must provide the manufacturer name, part number, and source, with accepted offerings including Performance Health Supply, LLC P/N A517302 and DJO LLC P/N 11-0180-4-13066. The delivery is required by July 17, 2026, under solicitation SPE2DS-26-T-239M, with all federal procurement and logistics protocols fully applicable.

General Info

Single latex-free elbow brace for large right arm, FOB destination, NSN 6515-01-599-3002, delivery by July 17, 2026, to Fort Bliss, Texas.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

BLDG 23015 REDBALL EXPRESS, FORT BLISS, TX, 79918-0000, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-239M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Allen Costello
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BRACE,CAST,ELBOW
BRACE, CAST, ELBOW
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RIGHT, SIZE LARGE OVER 8 INCHES FROM WRIST TO ELBOW
CREASE, LOCK OUT RANGE OF MOTION 0 TO 120 DEGREES
IN INCREMENTS OF 10 DEGREES, WASH AND AIR DRY,
LATEX FREE, EA
.
UNIT OF ISSUE EACH, EA
.
BIDDER SHALL SPECIFY SOURCE AND
PART NUMBER BEING SUPPLIED.
.
This device or drug is regulated by the FDA. Note to Buyers: The contracting official shall send a referral in EBS to the product specialist for confirmation. Please include bidder name and bidder contact information, manufacturer name, manufacturer part number, and item description.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT CONTAINER CAPABLE OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1 (MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DS-26-T-239M
SECTION B
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
PERFORMANCE HEALTH SUPPLY, LLC 4LL78 P/N A517302
DJO LLC 66501 P/N 11-0180-4-13066
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017500221 0001 EA 1.000
NSN/MATERIAL:6515015993002
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
SPE2DS-26-T-239M
SECTION B
PR: 7017500221 PRLI: 0001 CONT’D
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
MARKFOR
W90HDC
0047 CS BN CO A DISTRIBUTI
US ARMY 2 1AD AWCF SSF
BLDG 23015 REDBALL EXPRESS
FORT BLISS TX 79918-0000
US
M/F: (TCN) W90HDC61951222
RDD: 210
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: 2A FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE2DS-26-T-239M NSN/Part Number: 6515-01-599-3002 Quantity: 1 EA Purchase Request: 7017500221QTY: 1 Delivery: 20 days ADO

Similar Contracts

NAICS: 334511
New
Federal
G-IV Inertial Reference System UpgradeThe G-IV aircraft at Armstrong Flight Research Center requires an upgrade to its inertial reference system, which currently operates on the unsupported Honeywell LASEREF II unit. The original equipment manufacturer no longer provides support for this system or any alternative iterations except the LASEREF IV, which is the only compatible replacement approved for the G-IV platform. The acquisition includes three LASEREF IV units, the necessary adapter kit to transition from the legacy system, and full installation services to be carried out by an approved avionics shop to ensure compliance and operational integrity. This procurement is forecasted under the NAICS code 334511 and is managed by NASA’s National Aeronautics and Space Administration through the Armstrong Flight Research Center located at Edwards AFB. The action is intended to restore and maintain critical navigation capabilities, as the existing system is no longer serviceable due to discontinued support from the OEM and third parties. Point of contact for inquiries is Franzeska H. Becker, with additional support available through the Small Business Specialist, Curtis M. Paul. The solicitation is posted as a forecast with a projected timeline beginning October 1, 2026.
Armstrong Flight Research Center

POSTED

in 3 months

DEADLINE

N/A
View Details
NAICS: 334511
New
DIBBS
IMAGE INTENSIFIER TUBE, NIGHT VISIONThe contractor is required to conduct a first article test on one unit of item 5855016964208, an image intensifier tube for night vision, and submit a detailed test report within 150 calendar days of contract award to DLATesting@dla.mil, clearly marked with the contract number and lot/item number. The contractor must notify the contracting officer in writing at least 30 days prior to testing to allow government witnessing. The report must be signed and accompanied by the system of record receiving report and written confirmation that the same manufacturing processes and facilities will be used for production units. Submission addresses vary by DLA component: Aviation, Troop Support, Land, Maritime, and Construction and Equipment each have designated points of contact for receiving the report, with specific email or mailing instructions. The contractor must maintain an approved government inspection system and retain all supporting records for government review. If the first article is disapproved, the contractor must redo the tests at their own expense and resubmit a revised report under government-directed timelines. Failure to submit a timely report or repeated disapprovals may be treated as a failure to deliver under the contract’s default clause. Before first article approval, all costs for materials or production of remaining contract quantities are borne solely by the contractor and are not eligible for progress payments or termination settlements. If approved and not consumed in testing, the first article unit may be delivered as part of the contract quantity. The government may waive the requirement if similar items have been previously accepted. For government-performed testing, the contractor must ship the units to the designated test facility with proper labeling and documentation, including internal copies of the contract, drawings, certifications, and a pre-paid return label. Shipments must be traceable, accompanied by a notification email with shipment details and receiving report. The government may return unused test units at no cost to itself, provided the contractor supplies a return address and shipping account. The FOB point is destination, and government inspection occurs at source with acceptance at destination.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 5 hours

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
DIBBS
COMPUTER SUBASSEMBLThe contract pertains to the supply of a single computer subassembly identified by NSN 7050-01-512-1558 and purchase request 7017470849, with a delivery requirement of 20 days FOB destination. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to any hardware or supplies, except for functional uses in batteries, fluorescent lamps, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment system in compliance with NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with palletization following DLA’s procurement packaging requirements. The item must be shipped via the fastest traceable means, excluding parcel post, to the specified FPO address for USS IWO JIMA LHD 7, with shipment details governed by DLA procedural notes. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and covered defense information may apply. The contract references the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All government identification must be removed from non-accepted supplies, and the unit of issue is a single unit EA. The solicitation number is SPE8EN-26-T-2610, with a response deadline of July 27, 2026, and an original required delivery date of July 9, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
CANISTER ASSEMBLY, SUCTThe contract pertains to the procurement of 4 packing groups (PG), each containing 12 units, of a surgical suction canister assembly with part number 883000 and NSN 6515-01-620-3710, supplied by Laerdal Medical Corporation. Delivery is required within 20 days at the destination, specifically to W8002S at Fort Bragg, North Carolina, with no tolerance for quantity variance. All packaging must comply with DLA Packaging Requirements for Procurement and ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence. Items must be marked according to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and shipped via the fastest traceable means, excluding parcel post. The unit of issue is defined as a packing group (PG), and palletization must adhere to the specified DLA standards. The contract was issued under solicitation SPE2DS-26-T-237W with a required delivery date of July 17, 2026, and includes specific government-use identifiers and freight and shipping instructions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
DIBBS
TROCARThe contract specifies the procurement of 10 packages of disposable laparoscopic trocars with a blunt end, following the Hussong type design, each package containing six units. Each trocar must have a minimum shelf life of 60 months from the date of manufacture, with no extensions permitted, and no more than nine months may have elapsed between manufacture and delivery to the government. Labeling requirements mandate inclusion of the NSN, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. The item is governed by technical and quality requirements listed in the DLA Master List, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. Bidders must clearly identify the source and part number being offered. The NSN is 6515-01-582-6133, with a purchase request number of 7017501373, and delivery is required within 20 days of award under solicitation SPE2DS-26-T-240C, issued by the Department of Defense’s Medical Supply Chain under NAICS code 334511. The point of contact is James Burke, with bids due by July 21, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details