This Solicitation opportunity from Department Of Defense was posted on May 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

BRACKET, ANGLE

Closed

SPE4A5-26-T-133JFederal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

PIN, QUICK RELEASEThe contract involves the procurement of five units of a quick release pin identified by the National Stock Number 5315-00-883-2968. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract type is a solicitation, and there is no specified set-aside or NAICS code associated with it. The contract details indicate a federal organization as the issuer, but specific location information for both the office address and place of performance is not provided. While there is no contact information listed, further details and access to the solicitation can be obtained through the Defense Logistics Agency’s bidding platform. This contract seeks to fulfill a straightforward acquisition for the Department of Defense’s supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

NUTThe contract pertains to the procurement of 14 units of a item identified as "NUT" with NSN/Part Number 5310-01-248-1076. The solicitation, numbered SPE4A6-26-T-92S3, was posted by the Defense Logistics Agency under the Department of Defense on June 15, 2026. Interested parties were required to respond by June 23, 2026. This procurement is categorized as a solicitation and does not specify any set-aside type or NAICS code. The contract is managed by a federal organization, with performance details and specific office location information not disclosed. The solicitation can be accessed through the Defense Logistics Agency's bid board system.

Defense Logistics Agency

POSTED

DEADLINE

CHAIN, WELDLESSThe contract involves the procurement of 370 units of weldless chains identified by NSN/Part Number 4010-00-042-7913. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE4A5-26-T-239P. The solicitation was posted on June 15, 2026, and the deadline for response is June 23, 2026. The contract does not specify any set-aside type or particular small business category restrictions and lacks details on the NAICS code. The place of performance and specific office address details were not provided. Interested parties can access additional information and submit their responses through the Defense Logistics Agency’s bidding system website.

Defense Logistics Agency

POSTED

DEADLINE

LEAF, BUTT HINGEThe contract pertains to the procurement of a leaf butt hinge with the National Stock Number 5340-00-192-4090. A total quantity of five units has been requested under purchase request number 7016088362. This solicitation, identified by the number SPE7L1-26-T-706R, was issued by the Defense Logistics Agency, which operates under the Department of Defense. The solicitation was posted on June 15, 2026, and the deadline for responses is June 26, 2026. The contract is categorized as a federal solicitation with no specific set-aside type indicated. The place of performance and detailed office address information are not provided. The solicitation is accessible through the Defense Logistics Agency's procurement platform, ensuring that vendors can review and submit their responses within the specified timeframe. This contract reflects routine acquisition activity to support DoD operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

CLAMP, LOOPThe contract pertains to the procurement of 20 units of a product identified as "CLAMP, LOOP" with the National Stock Number 5340-01-721-0178. The solicitation, numbered SPE7L1-26-T-707D, was posted on June 15, 2026, with a response deadline set for June 26, 2026. This solicitation was issued by the Defense Logistics Agency, a component of the Department of Defense, and is classified as a federal acquisition. While specific details such as set-aside status, NAICS code, and exact performance location are not provided, the contract is intended to support federal government operations. The official solicitation and submission processes are managed through the specified online procurement portal. This contract facilitates the timely acquisition of essential hardware components within established federal procurement guidelines.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract is for the procurement of three units of an angle bracket, identified by NSN 5340-01-529-0404 and part number 5-86564-2, to be delivered to the Defense Distribution Depot in New Cumberland, Pennsylvania. The delivery is scheduled within 171 days from the award date, with an original required delivery date of April 20, 2028. The contract emphasizes adherence to a detailed set of technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, including packaging standards compliant with MIL-STD-129 and ASTM D3951, tailored quality requirements such as ISO 9001:2015 compliance, and specific sampling plans following MIL-STD-1916 or ASQ H1331. The contract stipulates that the item does not require shelf life and that identification marking on items is limited as per the customer's request. Additional contract conditions include provisions for cybersecurity compliance via a CMMC Level 2 self-assessment and packaged shipment adhering to both hazardous and non-hazardous material regulations. Inspection and acceptance points are designated at the destination, and no quantity variance is allowed. The contract is overseen by the Department of Defense’s ASC Supplier OEM Division, with a primary point of contact provided for administrative coordination. The procurement follows standardized federal acquisition guidelines and is posted for supplier responses by May 20, 2026.

General Info

Procurement of three angle brackets with strict quality, cybersecurity, and delivery requirements by April 2028.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-133J DLA Aviation May 13 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 12

Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Sarah Cave

contact@example.gov

+1 (555) 000-0000

Full Description

BRACKET,ANGLE
BRACKET, ANGLE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
THE BOEING COMPANY 82918 P/N 5-86564-2
SPE4A5-26-T-133J
SECTION B
PR: 7016752596 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016752596 0001 EA 3.000
NSN/MATERIAL:5340015290404
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-133J
SECTION B
PR: 7016752596 PRLI: 0001 CONT’D
Need Ship Date:11/08/2026 Original Required Delivery Date:04/20/2028
SPE4A5-26-T-133J NSN/Part Number: 5340-01-529-0404 Quantity: 3 EA Purchase Request: 7016752596QTY: 3 Delivery: 171 days ADO